1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Driver for Adaptec AHA-1542 SCSI host adapters
4 *
5 * Copyright (C) 1992 Tommy Thorn
6 * Copyright (C) 1993, 1994, 1995 Eric Youngdale
7 * Copyright (C) 2015 Ondrej Zary
8 */
9
10 #include <linux/module.h>
11 #include <linux/interrupt.h>
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/string.h>
15 #include <linux/delay.h>
16 #include <linux/init.h>
17 #include <linux/spinlock.h>
18 #include <linux/isa.h>
19 #include <linux/pnp.h>
20 #include <linux/slab.h>
21 #include <linux/io.h>
22 #include <asm/dma.h>
23 #include <scsi/scsi_cmnd.h>
24 #include <scsi/scsi_device.h>
25 #include <scsi/scsi_host.h>
26 #include "aha1542.h"
27
28 #define MAXBOARDS 4
29
30 static bool isapnp = 1;
31 module_param(isapnp, bool, 0);
32 MODULE_PARM_DESC(isapnp, "enable PnP support (default=1)");
33
34 static int io[MAXBOARDS] = { 0x330, 0x334, 0, 0 };
35 module_param_hw_array(io, int, ioport, NULL, 0);
36 MODULE_PARM_DESC(io, "base IO address of controller (0x130,0x134,0x230,0x234,0x330,0x334, default=0x330,0x334)");
37
38 /* time AHA spends on the AT-bus during data transfer */
39 static int bus_on[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 11us */
40 module_param_array(bus_on, int, NULL, 0);
41 MODULE_PARM_DESC(bus_on, "bus on time [us] (2-15, default=-1 [HW default: 11])");
42
43 /* time AHA spends off the bus (not to monopolize it) during data transfer */
44 static int bus_off[MAXBOARDS] = { -1, -1, -1, -1 }; /* power-on default: 4us */
45 module_param_array(bus_off, int, NULL, 0);
46 MODULE_PARM_DESC(bus_off, "bus off time [us] (1-64, default=-1 [HW default: 4])");
47
48 /* default is jumper selected (J1 on 1542A), factory default = 5 MB/s */
49 static int dma_speed[MAXBOARDS] = { -1, -1, -1, -1 };
50 module_param_array(dma_speed, int, NULL, 0);
51 MODULE_PARM_DESC(dma_speed, "DMA speed [MB/s] (5,6,7,8,10, default=-1 [by jumper])");
52
53 #define BIOS_TRANSLATION_6432 1 /* Default case these days */
54 #define BIOS_TRANSLATION_25563 2 /* Big disk case */
55
56 struct aha1542_hostdata {
57 /* This will effectively start both of them at the first mailbox */
58 int bios_translation; /* Mapping bios uses - for compatibility */
59 int aha1542_last_mbi_used;
60 int aha1542_last_mbo_used;
61 struct scsi_cmnd *int_cmds[AHA1542_MAILBOXES];
62 struct mailbox *mb;
63 dma_addr_t mb_handle;
64 struct ccb *ccb;
65 dma_addr_t ccb_handle;
66 };
67
68 #define AHA1542_MAX_SECTORS 16
69
70 struct aha1542_cmd {
71 /* bounce buffer */
72 void *data_buffer;
73 dma_addr_t data_buffer_handle;
74 };
75
aha1542_intr_reset(u16 base)76 static inline void aha1542_intr_reset(u16 base)
77 {
78 outb(IRST, CONTROL(base));
79 }
80
wait_mask(u16 port,u8 mask,u8 allof,u8 noneof,int timeout)81 static inline bool wait_mask(u16 port, u8 mask, u8 allof, u8 noneof, int timeout)
82 {
83 bool delayed = true;
84
85 if (timeout == 0) {
86 timeout = 3000000;
87 delayed = false;
88 }
89
90 while (1) {
91 u8 bits = inb(port) & mask;
92 if ((bits & allof) == allof && ((bits & noneof) == 0))
93 break;
94 if (delayed)
95 mdelay(1);
96 if (--timeout == 0)
97 return false;
98 }
99
100 return true;
101 }
102
aha1542_outb(unsigned int base,u8 val)103 static int aha1542_outb(unsigned int base, u8 val)
104 {
105 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
106 return 1;
107 outb(val, DATA(base));
108
109 return 0;
110 }
111
aha1542_out(unsigned int base,u8 * buf,int len)112 static int aha1542_out(unsigned int base, u8 *buf, int len)
113 {
114 while (len--) {
115 if (!wait_mask(STATUS(base), CDF, 0, CDF, 0))
116 return 1;
117 outb(*buf++, DATA(base));
118 }
119 if (!wait_mask(INTRFLAGS(base), INTRMASK, HACC, 0, 0))
120 return 1;
121
122 return 0;
123 }
124
125 /*
126 * Only used at boot time, so we do not need to worry about latency as much
127 * here
128 */
129
aha1542_in(unsigned int base,u8 * buf,int len,int timeout)130 static int aha1542_in(unsigned int base, u8 *buf, int len, int timeout)
131 {
132 while (len--) {
133 if (!wait_mask(STATUS(base), DF, DF, 0, timeout))
134 return 1;
135 *buf++ = inb(DATA(base));
136 }
137 return 0;
138 }
139
makecode(unsigned hosterr,unsigned scsierr)140 static int makecode(unsigned hosterr, unsigned scsierr)
141 {
142 switch (hosterr) {
143 case 0x0:
144 case 0xa: /* Linked command complete without error and linked normally */
145 case 0xb: /* Linked command complete without error, interrupt generated */
146 hosterr = 0;
147 break;
148
149 case 0x11: /* Selection time out-The initiator selection or target
150 * reselection was not complete within the SCSI Time out period
151 */
152 hosterr = DID_TIME_OUT;
153 break;
154
155 case 0x12: /* Data overrun/underrun-The target attempted to transfer more data
156 * than was allocated by the Data Length field or the sum of the
157 * Scatter / Gather Data Length fields.
158 */
159
160 case 0x13: /* Unexpected bus free-The target dropped the SCSI BSY at an unexpected time. */
161
162 case 0x15: /* MBO command was not 00, 01 or 02-The first byte of the CB was
163 * invalid. This usually indicates a software failure.
164 */
165
166 case 0x16: /* Invalid CCB Operation Code-The first byte of the CCB was invalid.
167 * This usually indicates a software failure.
168 */
169
170 case 0x17: /* Linked CCB does not have the same LUN-A subsequent CCB of a set
171 * of linked CCB's does not specify the same logical unit number as
172 * the first.
173 */
174 case 0x18: /* Invalid Target Direction received from Host-The direction of a
175 * Target Mode CCB was invalid.
176 */
177
178 case 0x19: /* Duplicate CCB Received in Target Mode-More than once CCB was
179 * received to service data transfer between the same target LUN
180 * and initiator SCSI ID in the same direction.
181 */
182
183 case 0x1a: /* Invalid CCB or Segment List Parameter-A segment list with a zero
184 * length segment or invalid segment list boundaries was received.
185 * A CCB parameter was invalid.
186 */
187 #ifdef DEBUG
188 printk("Aha1542: %x %x\n", hosterr, scsierr);
189 #endif
190 hosterr = DID_ERROR; /* Couldn't find any better */
191 break;
192
193 case 0x14: /* Target bus phase sequence failure-An invalid bus phase or bus
194 * phase sequence was requested by the target. The host adapter
195 * will generate a SCSI Reset Condition, notifying the host with
196 * a SCRD interrupt
197 */
198 hosterr = DID_RESET;
199 break;
200 default:
201 printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr);
202 break;
203 }
204 return scsierr | (hosterr << 16);
205 }
206
aha1542_test_port(struct Scsi_Host * sh)207 static int aha1542_test_port(struct Scsi_Host *sh)
208 {
209 int i;
210
211 /* Quick and dirty test for presence of the card. */
212 if (inb(STATUS(sh->io_port)) == 0xff)
213 return 0;
214
215 /* Reset the adapter. I ought to make a hard reset, but it's not really necessary */
216
217 /* In case some other card was probing here, reset interrupts */
218 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
219
220 outb(SRST | IRST /*|SCRST */ , CONTROL(sh->io_port));
221
222 mdelay(20); /* Wait a little bit for things to settle down. */
223
224 /* Expect INIT and IDLE, any of the others are bad */
225 if (!wait_mask(STATUS(sh->io_port), STATMASK, INIT | IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0))
226 return 0;
227
228 /* Shouldn't have generated any interrupts during reset */
229 if (inb(INTRFLAGS(sh->io_port)) & INTRMASK)
230 return 0;
231
232 /*
233 * Perform a host adapter inquiry instead so we do not need to set
234 * up the mailboxes ahead of time
235 */
236
237 aha1542_outb(sh->io_port, CMD_INQUIRY);
238
239 for (i = 0; i < 4; i++) {
240 if (!wait_mask(STATUS(sh->io_port), DF, DF, 0, 0))
241 return 0;
242 (void)inb(DATA(sh->io_port));
243 }
244
245 /* Reading port should reset DF */
246 if (inb(STATUS(sh->io_port)) & DF)
247 return 0;
248
249 /* When HACC, command is completed, and we're though testing */
250 if (!wait_mask(INTRFLAGS(sh->io_port), HACC, HACC, 0, 0))
251 return 0;
252
253 /* Clear interrupts */
254 outb(IRST, CONTROL(sh->io_port));
255
256 return 1;
257 }
258
aha1542_free_cmd(struct scsi_cmnd * cmd)259 static void aha1542_free_cmd(struct scsi_cmnd *cmd)
260 {
261 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd);
262
263 if (cmd->sc_data_direction == DMA_FROM_DEVICE) {
264 struct request *rq = scsi_cmd_to_rq(cmd);
265 void *buf = acmd->data_buffer;
266 struct req_iterator iter;
267 struct bio_vec bv;
268
269 rq_for_each_segment(bv, rq, iter) {
270 memcpy_to_bvec(&bv, buf);
271 buf += bv.bv_len;
272 }
273 }
274
275 scsi_dma_unmap(cmd);
276 }
277
aha1542_interrupt(int irq,void * dev_id)278 static irqreturn_t aha1542_interrupt(int irq, void *dev_id)
279 {
280 struct Scsi_Host *sh = dev_id;
281 struct aha1542_hostdata *aha1542 = shost_priv(sh);
282 int errstatus, mbi, mbo, mbistatus;
283 int number_serviced;
284 unsigned long flags;
285 struct scsi_cmnd *tmp_cmd;
286 int flag;
287 struct mailbox *mb = aha1542->mb;
288 struct ccb *ccb = aha1542->ccb;
289
290 #ifdef DEBUG
291 {
292 flag = inb(INTRFLAGS(sh->io_port));
293 shost_printk(KERN_DEBUG, sh, "aha1542_intr_handle: ");
294 if (!(flag & ANYINTR))
295 printk("no interrupt?");
296 if (flag & MBIF)
297 printk("MBIF ");
298 if (flag & MBOA)
299 printk("MBOF ");
300 if (flag & HACC)
301 printk("HACC ");
302 if (flag & SCRD)
303 printk("SCRD ");
304 printk("status %02x\n", inb(STATUS(sh->io_port)));
305 }
306 #endif
307 number_serviced = 0;
308
309 spin_lock_irqsave(sh->host_lock, flags);
310 while (1) {
311 flag = inb(INTRFLAGS(sh->io_port));
312
313 /*
314 * Check for unusual interrupts. If any of these happen, we should
315 * probably do something special, but for now just printing a message
316 * is sufficient. A SCSI reset detected is something that we really
317 * need to deal with in some way.
318 */
319 if (flag & ~MBIF) {
320 if (flag & MBOA)
321 printk("MBOF ");
322 if (flag & HACC)
323 printk("HACC ");
324 if (flag & SCRD)
325 printk("SCRD ");
326 }
327 aha1542_intr_reset(sh->io_port);
328
329 mbi = aha1542->aha1542_last_mbi_used + 1;
330 if (mbi >= 2 * AHA1542_MAILBOXES)
331 mbi = AHA1542_MAILBOXES;
332
333 do {
334 if (mb[mbi].status != 0)
335 break;
336 mbi++;
337 if (mbi >= 2 * AHA1542_MAILBOXES)
338 mbi = AHA1542_MAILBOXES;
339 } while (mbi != aha1542->aha1542_last_mbi_used);
340
341 if (mb[mbi].status == 0) {
342 spin_unlock_irqrestore(sh->host_lock, flags);
343 /* Hmm, no mail. Must have read it the last time around */
344 if (!number_serviced)
345 shost_printk(KERN_WARNING, sh, "interrupt received, but no mail.\n");
346 return IRQ_HANDLED;
347 }
348
349 mbo = (scsi2int(mb[mbi].ccbptr) - (unsigned long)aha1542->ccb_handle) / sizeof(struct ccb);
350 mbistatus = mb[mbi].status;
351 mb[mbi].status = 0;
352 aha1542->aha1542_last_mbi_used = mbi;
353
354 #ifdef DEBUG
355 if (ccb[mbo].tarstat | ccb[mbo].hastat)
356 shost_printk(KERN_DEBUG, sh, "aha1542_command: returning %x (status %d)\n",
357 ccb[mbo].tarstat + ((int) ccb[mbo].hastat << 16), mb[mbi].status);
358 #endif
359
360 if (mbistatus == 3)
361 continue; /* Aborted command not found */
362
363 #ifdef DEBUG
364 shost_printk(KERN_DEBUG, sh, "...done %d %d\n", mbo, mbi);
365 #endif
366
367 tmp_cmd = aha1542->int_cmds[mbo];
368
369 if (!tmp_cmd) {
370 spin_unlock_irqrestore(sh->host_lock, flags);
371 shost_printk(KERN_WARNING, sh, "Unexpected interrupt\n");
372 shost_printk(KERN_WARNING, sh, "tarstat=%x, hastat=%x idlun=%x ccb#=%d\n", ccb[mbo].tarstat,
373 ccb[mbo].hastat, ccb[mbo].idlun, mbo);
374 return IRQ_HANDLED;
375 }
376 aha1542_free_cmd(tmp_cmd);
377 /*
378 * Fetch the sense data, and tuck it away, in the required slot. The
379 * Adaptec automatically fetches it, and there is no guarantee that
380 * we will still have it in the cdb when we come back
381 */
382 if (ccb[mbo].tarstat == 2)
383 memcpy(tmp_cmd->sense_buffer, &ccb[mbo].cdb[ccb[mbo].cdblen],
384 SCSI_SENSE_BUFFERSIZE);
385
386
387 /* is there mail :-) */
388
389 /* more error checking left out here */
390 if (mbistatus != 1)
391 /* This is surely wrong, but I don't know what's right */
392 errstatus = makecode(ccb[mbo].hastat, ccb[mbo].tarstat);
393 else
394 errstatus = 0;
395
396 #ifdef DEBUG
397 if (errstatus)
398 shost_printk(KERN_DEBUG, sh, "(aha1542 error:%x %x %x) ", errstatus,
399 ccb[mbo].hastat, ccb[mbo].tarstat);
400 if (ccb[mbo].tarstat == 2)
401 print_hex_dump_bytes("sense: ", DUMP_PREFIX_NONE, &ccb[mbo].cdb[ccb[mbo].cdblen], 12);
402 if (errstatus)
403 printk("aha1542_intr_handle: returning %6x\n", errstatus);
404 #endif
405 tmp_cmd->result = errstatus;
406 aha1542->int_cmds[mbo] = NULL; /* This effectively frees up the mailbox slot, as
407 * far as queuecommand is concerned
408 */
409 scsi_done(tmp_cmd);
410 number_serviced++;
411 }
412 }
413
aha1542_queuecommand(struct Scsi_Host * sh,struct scsi_cmnd * cmd)414 static int aha1542_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
415 {
416 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd);
417 struct aha1542_hostdata *aha1542 = shost_priv(sh);
418 u8 direction;
419 u8 target = cmd->device->id;
420 u8 lun = cmd->device->lun;
421 unsigned long flags;
422 int bufflen = scsi_bufflen(cmd);
423 int mbo;
424 struct mailbox *mb = aha1542->mb;
425 struct ccb *ccb = aha1542->ccb;
426
427 if (*cmd->cmnd == REQUEST_SENSE) {
428 /* Don't do the command - we have the sense data already */
429 cmd->result = 0;
430 scsi_done(cmd);
431 return 0;
432 }
433 #ifdef DEBUG
434 {
435 int i = -1;
436 if (*cmd->cmnd == READ_10 || *cmd->cmnd == WRITE_10)
437 i = xscsi2int(cmd->cmnd + 2);
438 else if (*cmd->cmnd == READ_6 || *cmd->cmnd == WRITE_6)
439 i = scsi2int(cmd->cmnd + 2);
440 shost_printk(KERN_DEBUG, sh, "aha1542_queuecommand: dev %d cmd %02x pos %d len %d",
441 target, *cmd->cmnd, i, bufflen);
442 print_hex_dump_bytes("command: ", DUMP_PREFIX_NONE, cmd->cmnd, cmd->cmd_len);
443 }
444 #endif
445
446 if (cmd->sc_data_direction == DMA_TO_DEVICE) {
447 struct request *rq = scsi_cmd_to_rq(cmd);
448 void *buf = acmd->data_buffer;
449 struct req_iterator iter;
450 struct bio_vec bv;
451
452 rq_for_each_segment(bv, rq, iter) {
453 memcpy_from_bvec(buf, &bv);
454 buf += bv.bv_len;
455 }
456 }
457
458 /*
459 * Use the outgoing mailboxes in a round-robin fashion, because this
460 * is how the host adapter will scan for them
461 */
462
463 spin_lock_irqsave(sh->host_lock, flags);
464 mbo = aha1542->aha1542_last_mbo_used + 1;
465 if (mbo >= AHA1542_MAILBOXES)
466 mbo = 0;
467
468 do {
469 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
470 break;
471 mbo++;
472 if (mbo >= AHA1542_MAILBOXES)
473 mbo = 0;
474 } while (mbo != aha1542->aha1542_last_mbo_used);
475
476 if (mb[mbo].status || aha1542->int_cmds[mbo])
477 panic("Unable to find empty mailbox for aha1542.\n");
478
479 aha1542->int_cmds[mbo] = cmd; /* This will effectively prevent someone else from
480 * screwing with this cdb.
481 */
482
483 aha1542->aha1542_last_mbo_used = mbo;
484
485 #ifdef DEBUG
486 shost_printk(KERN_DEBUG, sh, "Sending command (%d)...", mbo);
487 #endif
488
489 /* This gets trashed for some reason */
490 any2scsi(mb[mbo].ccbptr, aha1542->ccb_handle + mbo * sizeof(*ccb));
491
492 memset(&ccb[mbo], 0, sizeof(struct ccb));
493
494 ccb[mbo].cdblen = cmd->cmd_len;
495
496 direction = 0;
497 if (*cmd->cmnd == READ_10 || *cmd->cmnd == READ_6)
498 direction = 8;
499 else if (*cmd->cmnd == WRITE_10 || *cmd->cmnd == WRITE_6)
500 direction = 16;
501
502 memcpy(ccb[mbo].cdb, cmd->cmnd, ccb[mbo].cdblen);
503 ccb[mbo].op = 0; /* SCSI Initiator Command */
504 any2scsi(ccb[mbo].datalen, bufflen);
505 if (bufflen)
506 any2scsi(ccb[mbo].dataptr, acmd->data_buffer_handle);
507 else
508 any2scsi(ccb[mbo].dataptr, 0);
509 ccb[mbo].idlun = (target & 7) << 5 | direction | (lun & 7); /*SCSI Target Id */
510 ccb[mbo].rsalen = 16;
511 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
512 ccb[mbo].commlinkid = 0;
513
514 #ifdef DEBUG
515 print_hex_dump_bytes("sending: ", DUMP_PREFIX_NONE, &ccb[mbo], sizeof(ccb[mbo]) - 10);
516 printk("aha1542_queuecommand: now waiting for interrupt ");
517 #endif
518 mb[mbo].status = 1;
519 aha1542_outb(cmd->device->host->io_port, CMD_START_SCSI);
520 spin_unlock_irqrestore(sh->host_lock, flags);
521
522 return 0;
523 }
524
525 /* Initialize mailboxes */
setup_mailboxes(struct Scsi_Host * sh)526 static void setup_mailboxes(struct Scsi_Host *sh)
527 {
528 struct aha1542_hostdata *aha1542 = shost_priv(sh);
529 u8 mb_cmd[5] = { CMD_MBINIT, AHA1542_MAILBOXES, 0, 0, 0};
530 int i;
531
532 for (i = 0; i < AHA1542_MAILBOXES; i++) {
533 aha1542->mb[i].status = 0;
534 any2scsi(aha1542->mb[i].ccbptr,
535 aha1542->ccb_handle + i * sizeof(struct ccb));
536 aha1542->mb[AHA1542_MAILBOXES + i].status = 0;
537 }
538 aha1542_intr_reset(sh->io_port); /* reset interrupts, so they don't block */
539 any2scsi(mb_cmd + 2, aha1542->mb_handle);
540 if (aha1542_out(sh->io_port, mb_cmd, 5))
541 shost_printk(KERN_ERR, sh, "failed setting up mailboxes\n");
542 aha1542_intr_reset(sh->io_port);
543 }
544
aha1542_getconfig(struct Scsi_Host * sh)545 static int aha1542_getconfig(struct Scsi_Host *sh)
546 {
547 u8 inquiry_result[3];
548 int i;
549 i = inb(STATUS(sh->io_port));
550 if (i & DF) {
551 i = inb(DATA(sh->io_port));
552 }
553 aha1542_outb(sh->io_port, CMD_RETCONF);
554 aha1542_in(sh->io_port, inquiry_result, 3, 0);
555 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
556 shost_printk(KERN_ERR, sh, "error querying board settings\n");
557 aha1542_intr_reset(sh->io_port);
558 switch (inquiry_result[0]) {
559 case 0x80:
560 sh->dma_channel = 7;
561 break;
562 case 0x40:
563 sh->dma_channel = 6;
564 break;
565 case 0x20:
566 sh->dma_channel = 5;
567 break;
568 case 0x01:
569 sh->dma_channel = 0;
570 break;
571 case 0:
572 /*
573 * This means that the adapter, although Adaptec 1542 compatible, doesn't use a DMA channel.
574 * Currently only aware of the BusLogic BT-445S VL-Bus adapter which needs this.
575 */
576 sh->dma_channel = 0xFF;
577 break;
578 default:
579 shost_printk(KERN_ERR, sh, "Unable to determine DMA channel.\n");
580 return -1;
581 }
582 switch (inquiry_result[1]) {
583 case 0x40:
584 sh->irq = 15;
585 break;
586 case 0x20:
587 sh->irq = 14;
588 break;
589 case 0x8:
590 sh->irq = 12;
591 break;
592 case 0x4:
593 sh->irq = 11;
594 break;
595 case 0x2:
596 sh->irq = 10;
597 break;
598 case 0x1:
599 sh->irq = 9;
600 break;
601 default:
602 shost_printk(KERN_ERR, sh, "Unable to determine IRQ level.\n");
603 return -1;
604 }
605 sh->this_id = inquiry_result[2] & 7;
606 return 0;
607 }
608
609 /*
610 * This function should only be called for 1542C boards - we can detect
611 * the special firmware settings and unlock the board
612 */
613
aha1542_mbenable(struct Scsi_Host * sh)614 static int aha1542_mbenable(struct Scsi_Host *sh)
615 {
616 static u8 mbenable_cmd[3];
617 static u8 mbenable_result[2];
618 int retval;
619
620 retval = BIOS_TRANSLATION_6432;
621
622 aha1542_outb(sh->io_port, CMD_EXTBIOS);
623 if (aha1542_in(sh->io_port, mbenable_result, 2, 100))
624 return retval;
625 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 100))
626 goto fail;
627 aha1542_intr_reset(sh->io_port);
628
629 if ((mbenable_result[0] & 0x08) || mbenable_result[1]) {
630 mbenable_cmd[0] = CMD_MBENABLE;
631 mbenable_cmd[1] = 0;
632 mbenable_cmd[2] = mbenable_result[1];
633
634 if ((mbenable_result[0] & 0x08) && (mbenable_result[1] & 0x03))
635 retval = BIOS_TRANSLATION_25563;
636
637 if (aha1542_out(sh->io_port, mbenable_cmd, 3))
638 goto fail;
639 }
640 while (0) {
641 fail:
642 shost_printk(KERN_ERR, sh, "Mailbox init failed\n");
643 }
644 aha1542_intr_reset(sh->io_port);
645 return retval;
646 }
647
648 /* Query the board to find out if it is a 1542 or a 1740, or whatever. */
aha1542_query(struct Scsi_Host * sh)649 static int aha1542_query(struct Scsi_Host *sh)
650 {
651 struct aha1542_hostdata *aha1542 = shost_priv(sh);
652 u8 inquiry_result[4];
653 int i;
654 i = inb(STATUS(sh->io_port));
655 if (i & DF) {
656 i = inb(DATA(sh->io_port));
657 }
658 aha1542_outb(sh->io_port, CMD_INQUIRY);
659 aha1542_in(sh->io_port, inquiry_result, 4, 0);
660 if (!wait_mask(INTRFLAGS(sh->io_port), INTRMASK, HACC, 0, 0))
661 shost_printk(KERN_ERR, sh, "error querying card type\n");
662 aha1542_intr_reset(sh->io_port);
663
664 aha1542->bios_translation = BIOS_TRANSLATION_6432; /* Default case */
665
666 /*
667 * For an AHA1740 series board, we ignore the board since there is a
668 * hardware bug which can lead to wrong blocks being returned if the board
669 * is operating in the 1542 emulation mode. Since there is an extended mode
670 * driver, we simply ignore the board and let the 1740 driver pick it up.
671 */
672
673 if (inquiry_result[0] == 0x43) {
674 shost_printk(KERN_INFO, sh, "Emulation mode not supported for AHA-1740 hardware, use aha1740 driver instead.\n");
675 return 1;
676 }
677
678 /*
679 * Always call this - boards that do not support extended bios translation
680 * will ignore the command, and we will set the proper default
681 */
682
683 aha1542->bios_translation = aha1542_mbenable(sh);
684
685 return 0;
686 }
687
dma_speed_hw(int dma_speed)688 static u8 dma_speed_hw(int dma_speed)
689 {
690 switch (dma_speed) {
691 case 5:
692 return 0x00;
693 case 6:
694 return 0x04;
695 case 7:
696 return 0x01;
697 case 8:
698 return 0x02;
699 case 10:
700 return 0x03;
701 }
702
703 return 0xff; /* invalid */
704 }
705
706 /* Set the Bus on/off-times as not to ruin floppy performance */
aha1542_set_bus_times(struct Scsi_Host * sh,int bus_on,int bus_off,int dma_speed)707 static void aha1542_set_bus_times(struct Scsi_Host *sh, int bus_on, int bus_off, int dma_speed)
708 {
709 if (bus_on > 0) {
710 u8 oncmd[] = { CMD_BUSON_TIME, clamp(bus_on, 2, 15) };
711
712 aha1542_intr_reset(sh->io_port);
713 if (aha1542_out(sh->io_port, oncmd, 2))
714 goto fail;
715 }
716
717 if (bus_off > 0) {
718 u8 offcmd[] = { CMD_BUSOFF_TIME, clamp(bus_off, 1, 64) };
719
720 aha1542_intr_reset(sh->io_port);
721 if (aha1542_out(sh->io_port, offcmd, 2))
722 goto fail;
723 }
724
725 if (dma_speed_hw(dma_speed) != 0xff) {
726 u8 dmacmd[] = { CMD_DMASPEED, dma_speed_hw(dma_speed) };
727
728 aha1542_intr_reset(sh->io_port);
729 if (aha1542_out(sh->io_port, dmacmd, 2))
730 goto fail;
731 }
732 aha1542_intr_reset(sh->io_port);
733 return;
734 fail:
735 shost_printk(KERN_ERR, sh, "setting bus on/off-time failed\n");
736 aha1542_intr_reset(sh->io_port);
737 }
738
739 /* return non-zero on detection */
aha1542_hw_init(const struct scsi_host_template * tpnt,struct device * pdev,int indx)740 static struct Scsi_Host *aha1542_hw_init(const struct scsi_host_template *tpnt,
741 struct device *pdev, int indx)
742 {
743 unsigned int base_io = io[indx];
744 struct Scsi_Host *sh;
745 struct aha1542_hostdata *aha1542;
746 char dma_info[] = "no DMA";
747
748 if (base_io == 0)
749 return NULL;
750
751 if (!request_region(base_io, AHA1542_REGION_SIZE, "aha1542"))
752 return NULL;
753
754 sh = scsi_host_alloc(tpnt, sizeof(struct aha1542_hostdata));
755 if (!sh)
756 goto release;
757 aha1542 = shost_priv(sh);
758
759 sh->unique_id = base_io;
760 sh->io_port = base_io;
761 sh->n_io_port = AHA1542_REGION_SIZE;
762 aha1542->aha1542_last_mbi_used = 2 * AHA1542_MAILBOXES - 1;
763 aha1542->aha1542_last_mbo_used = AHA1542_MAILBOXES - 1;
764
765 if (!aha1542_test_port(sh))
766 goto unregister;
767
768 aha1542_set_bus_times(sh, bus_on[indx], bus_off[indx], dma_speed[indx]);
769 if (aha1542_query(sh))
770 goto unregister;
771 if (aha1542_getconfig(sh) == -1)
772 goto unregister;
773
774 if (sh->dma_channel != 0xFF)
775 snprintf(dma_info, sizeof(dma_info), "DMA %d", sh->dma_channel);
776 shost_printk(KERN_INFO, sh, "Adaptec AHA-1542 (SCSI-ID %d) at IO 0x%x, IRQ %d, %s\n",
777 sh->this_id, base_io, sh->irq, dma_info);
778 if (aha1542->bios_translation == BIOS_TRANSLATION_25563)
779 shost_printk(KERN_INFO, sh, "Using extended bios translation\n");
780
781 if (dma_set_mask_and_coherent(pdev, DMA_BIT_MASK(24)) < 0)
782 goto unregister;
783
784 aha1542->mb = dma_alloc_coherent(pdev,
785 AHA1542_MAILBOXES * 2 * sizeof(struct mailbox),
786 &aha1542->mb_handle, GFP_KERNEL);
787 if (!aha1542->mb)
788 goto unregister;
789
790 aha1542->ccb = dma_alloc_coherent(pdev,
791 AHA1542_MAILBOXES * sizeof(struct ccb),
792 &aha1542->ccb_handle, GFP_KERNEL);
793 if (!aha1542->ccb)
794 goto free_mb;
795
796 setup_mailboxes(sh);
797
798 if (request_irq(sh->irq, aha1542_interrupt, 0, "aha1542", sh)) {
799 shost_printk(KERN_ERR, sh, "Unable to allocate IRQ.\n");
800 goto free_ccb;
801 }
802 if (sh->dma_channel != 0xFF) {
803 if (request_dma(sh->dma_channel, "aha1542")) {
804 shost_printk(KERN_ERR, sh, "Unable to allocate DMA channel.\n");
805 goto free_irq;
806 }
807 if (sh->dma_channel == 0 || sh->dma_channel >= 5) {
808 set_dma_mode(sh->dma_channel, DMA_MODE_CASCADE);
809 enable_dma(sh->dma_channel);
810 }
811 }
812
813 if (scsi_add_host(sh, pdev))
814 goto free_dma;
815
816 scsi_scan_host(sh);
817
818 return sh;
819
820 free_dma:
821 if (sh->dma_channel != 0xff)
822 free_dma(sh->dma_channel);
823 free_irq:
824 free_irq(sh->irq, sh);
825 free_ccb:
826 dma_free_coherent(pdev, AHA1542_MAILBOXES * sizeof(struct ccb),
827 aha1542->ccb, aha1542->ccb_handle);
828 free_mb:
829 dma_free_coherent(pdev, AHA1542_MAILBOXES * 2 * sizeof(struct mailbox),
830 aha1542->mb, aha1542->mb_handle);
831 unregister:
832 scsi_host_put(sh);
833 release:
834 release_region(base_io, AHA1542_REGION_SIZE);
835
836 return NULL;
837 }
838
aha1542_release(struct Scsi_Host * sh)839 static int aha1542_release(struct Scsi_Host *sh)
840 {
841 struct aha1542_hostdata *aha1542 = shost_priv(sh);
842 struct device *dev = sh->dma_dev;
843
844 scsi_remove_host(sh);
845 if (sh->dma_channel != 0xff)
846 free_dma(sh->dma_channel);
847 dma_free_coherent(dev, AHA1542_MAILBOXES * sizeof(struct ccb),
848 aha1542->ccb, aha1542->ccb_handle);
849 dma_free_coherent(dev, AHA1542_MAILBOXES * 2 * sizeof(struct mailbox),
850 aha1542->mb, aha1542->mb_handle);
851 if (sh->irq)
852 free_irq(sh->irq, sh);
853 if (sh->io_port && sh->n_io_port)
854 release_region(sh->io_port, sh->n_io_port);
855 scsi_host_put(sh);
856 return 0;
857 }
858
859
860 /*
861 * This is a device reset. This is handled by sending a special command
862 * to the device.
863 */
aha1542_dev_reset(struct scsi_cmnd * cmd)864 static int aha1542_dev_reset(struct scsi_cmnd *cmd)
865 {
866 struct Scsi_Host *sh = cmd->device->host;
867 struct aha1542_hostdata *aha1542 = shost_priv(sh);
868 unsigned long flags;
869 struct mailbox *mb = aha1542->mb;
870 u8 target = cmd->device->id;
871 u8 lun = cmd->device->lun;
872 int mbo;
873 struct ccb *ccb = aha1542->ccb;
874
875 spin_lock_irqsave(sh->host_lock, flags);
876 mbo = aha1542->aha1542_last_mbo_used + 1;
877 if (mbo >= AHA1542_MAILBOXES)
878 mbo = 0;
879
880 do {
881 if (mb[mbo].status == 0 && aha1542->int_cmds[mbo] == NULL)
882 break;
883 mbo++;
884 if (mbo >= AHA1542_MAILBOXES)
885 mbo = 0;
886 } while (mbo != aha1542->aha1542_last_mbo_used);
887
888 if (mb[mbo].status || aha1542->int_cmds[mbo])
889 panic("Unable to find empty mailbox for aha1542.\n");
890
891 aha1542->int_cmds[mbo] = cmd; /* This will effectively
892 * prevent someone else from
893 * screwing with this cdb.
894 */
895
896 aha1542->aha1542_last_mbo_used = mbo;
897
898 /* This gets trashed for some reason */
899 any2scsi(mb[mbo].ccbptr, aha1542->ccb_handle + mbo * sizeof(*ccb));
900
901 memset(&ccb[mbo], 0, sizeof(struct ccb));
902
903 ccb[mbo].op = 0x81; /* BUS DEVICE RESET */
904
905 ccb[mbo].idlun = (target & 7) << 5 | (lun & 7); /*SCSI Target Id */
906
907 ccb[mbo].linkptr[0] = ccb[mbo].linkptr[1] = ccb[mbo].linkptr[2] = 0;
908 ccb[mbo].commlinkid = 0;
909
910 /*
911 * Now tell the 1542 to flush all pending commands for this
912 * target
913 */
914 aha1542_outb(sh->io_port, CMD_START_SCSI);
915 spin_unlock_irqrestore(sh->host_lock, flags);
916
917 scmd_printk(KERN_WARNING, cmd,
918 "Trying device reset for target\n");
919
920 return SUCCESS;
921 }
922
aha1542_reset(struct scsi_cmnd * cmd,u8 reset_cmd)923 static int aha1542_reset(struct scsi_cmnd *cmd, u8 reset_cmd)
924 {
925 struct Scsi_Host *sh = cmd->device->host;
926 struct aha1542_hostdata *aha1542 = shost_priv(sh);
927 unsigned long flags;
928 int i;
929
930 spin_lock_irqsave(sh->host_lock, flags);
931 /*
932 * This does a scsi reset for all devices on the bus.
933 * In principle, we could also reset the 1542 - should
934 * we do this? Try this first, and we can add that later
935 * if it turns out to be useful.
936 */
937 outb(reset_cmd, CONTROL(cmd->device->host->io_port));
938
939 if (!wait_mask(STATUS(cmd->device->host->io_port),
940 STATMASK, IDLE, STST | DIAGF | INVDCMD | DF | CDF, 0)) {
941 spin_unlock_irqrestore(sh->host_lock, flags);
942 return FAILED;
943 }
944
945 /*
946 * We need to do this too before the 1542 can interact with
947 * us again after host reset.
948 */
949 if (reset_cmd & HRST)
950 setup_mailboxes(cmd->device->host);
951
952 /*
953 * Now try to pick up the pieces. For all pending commands,
954 * free any internal data structures, and basically clear things
955 * out. We do not try and restart any commands or anything -
956 * the strategy handler takes care of that crap.
957 */
958 shost_printk(KERN_WARNING, cmd->device->host, "Sent BUS RESET to scsi host %d\n", cmd->device->host->host_no);
959
960 for (i = 0; i < AHA1542_MAILBOXES; i++) {
961 if (aha1542->int_cmds[i] != NULL) {
962 struct scsi_cmnd *tmp_cmd;
963 tmp_cmd = aha1542->int_cmds[i];
964
965 if (tmp_cmd->device->soft_reset) {
966 /*
967 * If this device implements the soft reset option,
968 * then it is still holding onto the command, and
969 * may yet complete it. In this case, we don't
970 * flush the data.
971 */
972 continue;
973 }
974 aha1542_free_cmd(tmp_cmd);
975 aha1542->int_cmds[i] = NULL;
976 aha1542->mb[i].status = 0;
977 }
978 }
979
980 spin_unlock_irqrestore(sh->host_lock, flags);
981 return SUCCESS;
982 }
983
aha1542_bus_reset(struct scsi_cmnd * cmd)984 static int aha1542_bus_reset(struct scsi_cmnd *cmd)
985 {
986 return aha1542_reset(cmd, SCRST);
987 }
988
aha1542_host_reset(struct scsi_cmnd * cmd)989 static int aha1542_host_reset(struct scsi_cmnd *cmd)
990 {
991 return aha1542_reset(cmd, HRST | SCRST);
992 }
993
aha1542_biosparam(struct scsi_device * sdev,struct block_device * bdev,sector_t capacity,int geom[])994 static int aha1542_biosparam(struct scsi_device *sdev,
995 struct block_device *bdev, sector_t capacity, int geom[])
996 {
997 struct aha1542_hostdata *aha1542 = shost_priv(sdev->host);
998
999 if (capacity >= 0x200000 &&
1000 aha1542->bios_translation == BIOS_TRANSLATION_25563) {
1001 /* Please verify that this is the same as what DOS returns */
1002 geom[0] = 255; /* heads */
1003 geom[1] = 63; /* sectors */
1004 } else {
1005 geom[0] = 64; /* heads */
1006 geom[1] = 32; /* sectors */
1007 }
1008 geom[2] = sector_div(capacity, geom[0] * geom[1]); /* cylinders */
1009
1010 return 0;
1011 }
1012
1013 MODULE_DESCRIPTION("Adaptec AHA-1542 SCSI host adapter driver");
1014 MODULE_LICENSE("GPL");
1015
aha1542_init_cmd_priv(struct Scsi_Host * shost,struct scsi_cmnd * cmd)1016 static int aha1542_init_cmd_priv(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
1017 {
1018 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd);
1019
1020 acmd->data_buffer = dma_alloc_coherent(shost->dma_dev,
1021 SECTOR_SIZE * AHA1542_MAX_SECTORS,
1022 &acmd->data_buffer_handle, GFP_KERNEL);
1023 if (!acmd->data_buffer)
1024 return -ENOMEM;
1025 return 0;
1026 }
1027
aha1542_exit_cmd_priv(struct Scsi_Host * shost,struct scsi_cmnd * cmd)1028 static int aha1542_exit_cmd_priv(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
1029 {
1030 struct aha1542_cmd *acmd = scsi_cmd_priv(cmd);
1031
1032 dma_free_coherent(shost->dma_dev, SECTOR_SIZE * AHA1542_MAX_SECTORS,
1033 acmd->data_buffer, acmd->data_buffer_handle);
1034 return 0;
1035 }
1036
1037 static const struct scsi_host_template driver_template = {
1038 .module = THIS_MODULE,
1039 .proc_name = "aha1542",
1040 .name = "Adaptec 1542",
1041 .cmd_size = sizeof(struct aha1542_cmd),
1042 .queuecommand = aha1542_queuecommand,
1043 .eh_device_reset_handler= aha1542_dev_reset,
1044 .eh_bus_reset_handler = aha1542_bus_reset,
1045 .eh_host_reset_handler = aha1542_host_reset,
1046 .bios_param = aha1542_biosparam,
1047 .init_cmd_priv = aha1542_init_cmd_priv,
1048 .exit_cmd_priv = aha1542_exit_cmd_priv,
1049 .can_queue = AHA1542_MAILBOXES,
1050 .this_id = 7,
1051 .max_sectors = AHA1542_MAX_SECTORS,
1052 .sg_tablesize = SG_ALL,
1053 };
1054
aha1542_isa_match(struct device * pdev,unsigned int ndev)1055 static int aha1542_isa_match(struct device *pdev, unsigned int ndev)
1056 {
1057 struct Scsi_Host *sh = aha1542_hw_init(&driver_template, pdev, ndev);
1058
1059 if (!sh)
1060 return 0;
1061
1062 dev_set_drvdata(pdev, sh);
1063 return 1;
1064 }
1065
aha1542_isa_remove(struct device * pdev,unsigned int ndev)1066 static void aha1542_isa_remove(struct device *pdev,
1067 unsigned int ndev)
1068 {
1069 aha1542_release(dev_get_drvdata(pdev));
1070 dev_set_drvdata(pdev, NULL);
1071 }
1072
1073 static struct isa_driver aha1542_isa_driver = {
1074 .match = aha1542_isa_match,
1075 .remove = aha1542_isa_remove,
1076 .driver = {
1077 .name = "aha1542"
1078 },
1079 };
1080 static int isa_registered;
1081
1082 #ifdef CONFIG_PNP
1083 static const struct pnp_device_id aha1542_pnp_ids[] = {
1084 { .id = "ADP1542" },
1085 { .id = "" }
1086 };
1087 MODULE_DEVICE_TABLE(pnp, aha1542_pnp_ids);
1088
aha1542_pnp_probe(struct pnp_dev * pdev,const struct pnp_device_id * id)1089 static int aha1542_pnp_probe(struct pnp_dev *pdev, const struct pnp_device_id *id)
1090 {
1091 int indx;
1092 struct Scsi_Host *sh;
1093
1094 for (indx = 0; indx < ARRAY_SIZE(io); indx++) {
1095 if (io[indx])
1096 continue;
1097
1098 if (pnp_activate_dev(pdev) < 0)
1099 continue;
1100
1101 io[indx] = pnp_port_start(pdev, 0);
1102
1103 /*
1104 * The card can be queried for its DMA, we have
1105 * the DMA set up that is enough
1106 */
1107
1108 dev_info(&pdev->dev, "ISAPnP found an AHA1535 at I/O 0x%03X", io[indx]);
1109 }
1110
1111 sh = aha1542_hw_init(&driver_template, &pdev->dev, indx);
1112 if (!sh)
1113 return -ENODEV;
1114
1115 pnp_set_drvdata(pdev, sh);
1116 return 0;
1117 }
1118
aha1542_pnp_remove(struct pnp_dev * pdev)1119 static void aha1542_pnp_remove(struct pnp_dev *pdev)
1120 {
1121 aha1542_release(pnp_get_drvdata(pdev));
1122 pnp_set_drvdata(pdev, NULL);
1123 }
1124
1125 static struct pnp_driver aha1542_pnp_driver = {
1126 .name = "aha1542",
1127 .id_table = aha1542_pnp_ids,
1128 .probe = aha1542_pnp_probe,
1129 .remove = aha1542_pnp_remove,
1130 };
1131 static int pnp_registered;
1132 #endif /* CONFIG_PNP */
1133
aha1542_init(void)1134 static int __init aha1542_init(void)
1135 {
1136 int ret = 0;
1137
1138 #ifdef CONFIG_PNP
1139 if (isapnp) {
1140 ret = pnp_register_driver(&aha1542_pnp_driver);
1141 if (!ret)
1142 pnp_registered = 1;
1143 }
1144 #endif
1145 ret = isa_register_driver(&aha1542_isa_driver, MAXBOARDS);
1146 if (!ret)
1147 isa_registered = 1;
1148
1149 #ifdef CONFIG_PNP
1150 if (pnp_registered)
1151 ret = 0;
1152 #endif
1153 if (isa_registered)
1154 ret = 0;
1155
1156 return ret;
1157 }
1158
aha1542_exit(void)1159 static void __exit aha1542_exit(void)
1160 {
1161 #ifdef CONFIG_PNP
1162 if (pnp_registered)
1163 pnp_unregister_driver(&aha1542_pnp_driver);
1164 #endif
1165 if (isa_registered)
1166 isa_unregister_driver(&aha1542_isa_driver);
1167 }
1168
1169 module_init(aha1542_init);
1170 module_exit(aha1542_exit);
1171