1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright (C) 2016 - Marcin Malagowski <mrc@bourne.st>
4 */
5 #include <linux/delay.h>
6 #include <linux/device.h>
7 #include <linux/err.h>
8 #include <linux/i2c.h>
9 #include <linux/io.h>
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/iio/iio.h>
13
14 #define ABP060MG_ERROR_MASK 0xC000
15 #define ABP060MG_RESP_TIME_MS 40
16 #define ABP060MG_MIN_COUNTS 1638 /* = 0x0666 (10% of u14) */
17 #define ABP060MG_MAX_COUNTS 14745 /* = 0x3999 (90% of u14) */
18 #define ABP060MG_NUM_COUNTS (ABP060MG_MAX_COUNTS - ABP060MG_MIN_COUNTS)
19
20 enum abp_variant {
21 /* gage [kPa] */
22 ABP006KG, ABP010KG, ABP016KG, ABP025KG, ABP040KG, ABP060KG, ABP100KG,
23 ABP160KG, ABP250KG, ABP400KG, ABP600KG, ABP001GG,
24 /* differential [kPa] */
25 ABP006KD, ABP010KD, ABP016KD, ABP025KD, ABP040KD, ABP060KD, ABP100KD,
26 ABP160KD, ABP250KD, ABP400KD,
27 /* gage [psi] */
28 ABP001PG, ABP005PG, ABP015PG, ABP030PG, ABP060PG, ABP100PG, ABP150PG,
29 /* differential [psi] */
30 ABP001PD, ABP005PD, ABP015PD, ABP030PD, ABP060PD,
31 };
32
33 struct abp_config {
34 int min;
35 int max;
36 };
37
38 static struct abp_config abp_config[] = {
39 /* mbar & kPa variants */
40 [ABP006KG] = { .min = 0, .max = 6000 },
41 [ABP010KG] = { .min = 0, .max = 10000 },
42 [ABP016KG] = { .min = 0, .max = 16000 },
43 [ABP025KG] = { .min = 0, .max = 25000 },
44 [ABP040KG] = { .min = 0, .max = 40000 },
45 [ABP060KG] = { .min = 0, .max = 60000 },
46 [ABP100KG] = { .min = 0, .max = 100000 },
47 [ABP160KG] = { .min = 0, .max = 160000 },
48 [ABP250KG] = { .min = 0, .max = 250000 },
49 [ABP400KG] = { .min = 0, .max = 400000 },
50 [ABP600KG] = { .min = 0, .max = 600000 },
51 [ABP001GG] = { .min = 0, .max = 1000000 },
52 [ABP006KD] = { .min = -6000, .max = 6000 },
53 [ABP010KD] = { .min = -10000, .max = 10000 },
54 [ABP016KD] = { .min = -16000, .max = 16000 },
55 [ABP025KD] = { .min = -25000, .max = 25000 },
56 [ABP040KD] = { .min = -40000, .max = 40000 },
57 [ABP060KD] = { .min = -60000, .max = 60000 },
58 [ABP100KD] = { .min = -100000, .max = 100000 },
59 [ABP160KD] = { .min = -160000, .max = 160000 },
60 [ABP250KD] = { .min = -250000, .max = 250000 },
61 [ABP400KD] = { .min = -400000, .max = 400000 },
62 /* psi variants (1 psi ~ 6895 Pa) */
63 [ABP001PG] = { .min = 0, .max = 6985 },
64 [ABP005PG] = { .min = 0, .max = 34474 },
65 [ABP015PG] = { .min = 0, .max = 103421 },
66 [ABP030PG] = { .min = 0, .max = 206843 },
67 [ABP060PG] = { .min = 0, .max = 413686 },
68 [ABP100PG] = { .min = 0, .max = 689476 },
69 [ABP150PG] = { .min = 0, .max = 1034214 },
70 [ABP001PD] = { .min = -6895, .max = 6895 },
71 [ABP005PD] = { .min = -34474, .max = 34474 },
72 [ABP015PD] = { .min = -103421, .max = 103421 },
73 [ABP030PD] = { .min = -206843, .max = 206843 },
74 [ABP060PD] = { .min = -413686, .max = 413686 },
75 };
76
77 struct abp_state {
78 struct i2c_client *client;
79 struct mutex lock;
80
81 /*
82 * bus-dependent MEASURE_REQUEST length.
83 * If no SMBUS_QUICK support, need to send dummy byte
84 */
85 int mreq_len;
86
87 /* model-dependent values (calculated on probe) */
88 int scale;
89 int offset;
90 };
91
92 static const struct iio_chan_spec abp060mg_channels[] = {
93 {
94 .type = IIO_PRESSURE,
95 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
96 BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE),
97 },
98 };
99
abp060mg_get_measurement(struct abp_state * state,int * val)100 static int abp060mg_get_measurement(struct abp_state *state, int *val)
101 {
102 struct i2c_client *client = state->client;
103 __be16 buf[2];
104 u16 pressure;
105 int ret;
106
107 buf[0] = 0;
108 ret = i2c_master_send(client, (u8 *)&buf, state->mreq_len);
109 if (ret < 0)
110 return ret;
111
112 msleep_interruptible(ABP060MG_RESP_TIME_MS);
113
114 ret = i2c_master_recv(client, (u8 *)&buf, sizeof(buf));
115 if (ret < 0)
116 return ret;
117
118 pressure = be16_to_cpu(buf[0]);
119 if (pressure & ABP060MG_ERROR_MASK)
120 return -EIO;
121
122 if (pressure < ABP060MG_MIN_COUNTS || pressure > ABP060MG_MAX_COUNTS)
123 return -EIO;
124
125 *val = pressure;
126
127 return IIO_VAL_INT;
128 }
129
abp060mg_read_raw(struct iio_dev * indio_dev,struct iio_chan_spec const * chan,int * val,int * val2,long mask)130 static int abp060mg_read_raw(struct iio_dev *indio_dev,
131 struct iio_chan_spec const *chan, int *val,
132 int *val2, long mask)
133 {
134 struct abp_state *state = iio_priv(indio_dev);
135 int ret;
136
137 mutex_lock(&state->lock);
138
139 switch (mask) {
140 case IIO_CHAN_INFO_RAW:
141 ret = abp060mg_get_measurement(state, val);
142 break;
143 case IIO_CHAN_INFO_OFFSET:
144 *val = state->offset;
145 ret = IIO_VAL_INT;
146 break;
147 case IIO_CHAN_INFO_SCALE:
148 *val = state->scale;
149 *val2 = ABP060MG_NUM_COUNTS * 1000; /* to kPa */
150 ret = IIO_VAL_FRACTIONAL;
151 break;
152 default:
153 ret = -EINVAL;
154 break;
155 }
156
157 mutex_unlock(&state->lock);
158 return ret;
159 }
160
161 static const struct iio_info abp060mg_info = {
162 .read_raw = abp060mg_read_raw,
163 };
164
abp060mg_init_device(struct iio_dev * indio_dev,unsigned long id)165 static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
166 {
167 struct abp_state *state = iio_priv(indio_dev);
168 struct abp_config *cfg = &abp_config[id];
169
170 state->scale = cfg->max - cfg->min;
171 state->offset = -ABP060MG_MIN_COUNTS;
172
173 if (cfg->min < 0) /* differential */
174 state->offset -= ABP060MG_NUM_COUNTS >> 1;
175 }
176
abp060mg_probe(struct i2c_client * client)177 static int abp060mg_probe(struct i2c_client *client)
178 {
179 const struct i2c_device_id *id = i2c_client_get_device_id(client);
180 struct iio_dev *indio_dev;
181 struct abp_state *state;
182 unsigned long cfg_id = id->driver_data;
183
184 indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
185 if (!indio_dev)
186 return -ENOMEM;
187
188 state = iio_priv(indio_dev);
189 i2c_set_clientdata(client, state);
190 state->client = client;
191
192 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
193 state->mreq_len = 1;
194
195 abp060mg_init_device(indio_dev, cfg_id);
196
197 indio_dev->name = dev_name(&client->dev);
198 indio_dev->modes = INDIO_DIRECT_MODE;
199 indio_dev->info = &abp060mg_info;
200
201 indio_dev->channels = abp060mg_channels;
202 indio_dev->num_channels = ARRAY_SIZE(abp060mg_channels);
203
204 mutex_init(&state->lock);
205
206 return devm_iio_device_register(&client->dev, indio_dev);
207 }
208
209 static const struct i2c_device_id abp060mg_id_table[] = {
210 /* mbar & kPa variants (abp060m [60 mbar] == abp006k [6 kPa]) */
211 /* gage: */
212 { "abp060mg", ABP006KG }, { "abp006kg", ABP006KG },
213 { "abp100mg", ABP010KG }, { "abp010kg", ABP010KG },
214 { "abp160mg", ABP016KG }, { "abp016kg", ABP016KG },
215 { "abp250mg", ABP025KG }, { "abp025kg", ABP025KG },
216 { "abp400mg", ABP040KG }, { "abp040kg", ABP040KG },
217 { "abp600mg", ABP060KG }, { "abp060kg", ABP060KG },
218 { "abp001bg", ABP100KG }, { "abp100kg", ABP100KG },
219 { "abp1_6bg", ABP160KG }, { "abp160kg", ABP160KG },
220 { "abp2_5bg", ABP250KG }, { "abp250kg", ABP250KG },
221 { "abp004bg", ABP400KG }, { "abp400kg", ABP400KG },
222 { "abp006bg", ABP600KG }, { "abp600kg", ABP600KG },
223 { "abp010bg", ABP001GG }, { "abp001gg", ABP001GG },
224 /* differential: */
225 { "abp060md", ABP006KD }, { "abp006kd", ABP006KD },
226 { "abp100md", ABP010KD }, { "abp010kd", ABP010KD },
227 { "abp160md", ABP016KD }, { "abp016kd", ABP016KD },
228 { "abp250md", ABP025KD }, { "abp025kd", ABP025KD },
229 { "abp400md", ABP040KD }, { "abp040kd", ABP040KD },
230 { "abp600md", ABP060KD }, { "abp060kd", ABP060KD },
231 { "abp001bd", ABP100KD }, { "abp100kd", ABP100KD },
232 { "abp1_6bd", ABP160KD }, { "abp160kd", ABP160KD },
233 { "abp2_5bd", ABP250KD }, { "abp250kd", ABP250KD },
234 { "abp004bd", ABP400KD }, { "abp400kd", ABP400KD },
235 /* psi variants */
236 /* gage: */
237 { "abp001pg", ABP001PG },
238 { "abp005pg", ABP005PG },
239 { "abp015pg", ABP015PG },
240 { "abp030pg", ABP030PG },
241 { "abp060pg", ABP060PG },
242 { "abp100pg", ABP100PG },
243 { "abp150pg", ABP150PG },
244 /* differential: */
245 { "abp001pd", ABP001PD },
246 { "abp005pd", ABP005PD },
247 { "abp015pd", ABP015PD },
248 { "abp030pd", ABP030PD },
249 { "abp060pd", ABP060PD },
250 { /* empty */ },
251 };
252 MODULE_DEVICE_TABLE(i2c, abp060mg_id_table);
253
254 static struct i2c_driver abp060mg_driver = {
255 .driver = {
256 .name = "abp060mg",
257 },
258 .probe = abp060mg_probe,
259 .id_table = abp060mg_id_table,
260 };
261 module_i2c_driver(abp060mg_driver);
262
263 MODULE_AUTHOR("Marcin Malagowski <mrc@bourne.st>");
264 MODULE_DESCRIPTION("Honeywell ABP pressure sensor driver");
265 MODULE_LICENSE("GPL");
266