Lines Matching full:interval

12 .RB [ "\--interval seconds" ]
21 and turbostat displays statistics every 5 seconds interval.
22 The 5-second interval can be changed using the --interval option.
52 		'delta' shows the difference in values during the measurement interval.
73 		'delta' shows the difference in values during the measurement interval.
114 \fB--interval seconds\fP overrides the default 5.0 second measurement interval.
127 \fB--Summary\fP limits output to a 1-line System Summary for each interval.
142 …e (seconds.subsec since Epoch) when the counters ending the measurement interval were collected.  …
152 \fBBusy%\fP percent of the measurement interval that the CPU executes instructions, aka. % of time …
156 \fBTSC_MHz\fP average MHz that the TSC ran during the entire interval.
158 \fBIRQ\fP The number of interrupts serviced by that CPU during the measurement interval.  The syste…
160 \fBSMI\fP The number of System Management Interrupts  serviced CPU during the measurement interval.…
162 … times Linux requested the C1, C2, C3 idle state during the measurement interval.  The system summ…
164 … times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have …
166 … times Linux requested the C1, C2, C3 idle state during the measurement interval, but should have …
176 \fBCoreThr\fP Core Thermal Throttling events during the measurement interval.  Note that events sin…
178 …f time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/…
180 \fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. …
182 \fBGFXAMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval.…
184 …e the SA Media is in the "module C6" state, mc6, during the measurement interval. From /sys/class/…
186 \fBSAMMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. …
188 \fBSAMAMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval.…
190 \fBTotl%C0\fP Weighted percentage of time that CPUs are busy. If N CPUs are busy during an interval…
210 \fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.  Note that the …
212 \fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM.
254 .SH PERIODIC INTERVAL EXAMPLE
257 The 5-second interval can be changed with the "-i sec" option.
442 we set the format to 'delta', to display the difference in ticks during the measurement interval,
451 we set the format to 'delta', to display the difference in ticks during the measurement interval,
468 For interval-mode, turbostat will immediately end the current interval
470 turbostat will then start the next interval.
475 SIGINT will interrupt interval-mode.
476 The end-of-interval data will be collected and displayed before turbostat exits.
478 SIGUSR1 will end current interval,
479 end-of-interval data will be collected and displayed before turbostat
480 starts a new interval.
504 number of elapsed cycles divided by the entire sample interval --