Lines Matching +full:80 +full:a
134 CFG80211_PER_BW_VALID_PUNCTURING_VALUES(80),
150 start_freq = chandef->center_freq1 - 80;
295 mhz = 80;
385 /* adjacent is not allowed -- that's a 160 MHz channel */
386 if (chandef->center_freq1 - chandef->center_freq2 == 80 ||
387 chandef->center_freq2 - chandef->center_freq1 == 80)
572 * Here "narrower" includes being a 20 MHz non-HT channel vs. a
587 * If c1 is 80+80, then c2 is 160 or higher, but that cannot
588 * match. If c2 was also 80+80 it was already either accepted
685 * Check if P2P GO is allowed to operate on a DFS channel
706 * Allow only if there's a concurrent BSS
1121 /* check bw_config is a subset of what driver supports
1265 width = 80;
1316 * TODO: What if there are only certain 80/160/80+80 MHz channels
1319 * 80/160 MHz and in particular 80+80 MHz this isn't really
1321 * no way to cover 80+80 MHz or more complex restrictions.
1368 * If a GO already operates on the same GO_CONCURRENT channel,
1395 * At some locations channels 149-165 are considered a
1397 * channels 149-161 are considered a bundle while
1398 * channel 165 is left out and considered to be in a
1399 * different bundle. Thus, in case that there is a
1402 * GO operations. However, having a station interface
1422 * In addition allow operation on a channel on which indoor operation is
1454 * enforce the relaxation (by doing a similar verifications as this),
1518 * Under certain conditions suggested by some regulatory bodies a