Lines Matching +full:output +full:- +full:enable

1 /* SPDX-License-Identifier: GPL-2.0-or-later */
16 /* input/output control */
18 /* input/output control */
50 /* Q-subcode address + control */
52 /* Q-subcode track */
54 /* Q-subcode index */
56 /* Q-subcode minute */
58 /* Q-subcode second */
60 /* Q-subcode frame */
62 /* Q-subcode zero */
64 /* Q-subcode absolute minute */
66 /* Q-subcode absolute second */
68 /* Q-subcode absolute frame */
72 #define AK4113_REG_RXCSB_SIZE	((AK4113_REG_RXCSB4-AK4113_REG_RXCSB0)+1)
73 #define AK4113_REG_QSUB_SIZE	((AK4113_REG_QSUB_ABSFRM-AK4113_REG_QSUB_ADDR)\
81 /* Block Start & C/U Output Mode */
97 /* V/TX Output select: 0 = Validity Flag Output, 1 = TX */
105 /* Deemphasis Autodetect Enable (1 = enable) */
107 /* 32kHz-48kHz Deemphasis Control */
109 /* 32kHz-48kHz Deemphasis Control */
115 /* STDO: 16-bit, right justified */
117 /* STDO: 18-bit, right justified */
119 /* STDO: 20-bit, right justified */
121 /* STDO: 24-bit, right justified */
123 /* STDO: 24-bit, left justified */
127 /* STDO: 24-bit, left justified; LRCLK, BICK = Input */
133 /* XTL1=0,XTL0=0 -> 11.2896Mhz; XTL1=0,XTL0=1 -> 12.288Mhz */
135 /* XTL1=1,XTL0=0 -> 24.576Mhz; XTL1=1,XTL0=1 -> use channel status */
137 /* Block Start Signal Output: 0 = U-bit, 1 = C-bit (req. BCU = 1) */
139 /* TX Output Enable (1 = enable) */
141 /* Output Through Data Selector for TX pin */
143 /* Output Through Data Selector for TX pin */
145 /* Output Through Data Selector for TX pin */
165 /* MCKO2 Output Select: 0 = CMx/OCKSx, 1 = Xtal */
167 /* MCKO2 Output Freq. Select: 0 = x1, 1 = x0.5  (req. XMCK = 1) */
178 /* mask enable for QINT bit */
180 /* mask enable for AUTO bit */
182 /* mask enable for CINT bit */
184 /* mask enable for UNLOCK bit */
186 /* mask enable for V bit */
188 /* mask enable for STC bit */
190 /* mask enable for AUDN bit */
192 /* mask enable for PAR bit */
198 /* DTS-CD 16-bit Sync Word Detect */
200 /* DTS-CD 14-bit Sync Word Detect */
202 /* mask enable for DAT bit (if 1, no INT1 effect */
204 /* mask enable for DAT bit (if 1, no INT0 effect */
208 /* Q-subcode buffer interrupt, 0 = no change, 1 = changed */
210 /* Non-PCM or DTS stream auto detection, 0 = no detect, 1 = detect */
218 /* sampling frequency or Pre-emphasis change, 0 = no detect, 1 = detect */
220 /* audio bit output, 0 = audio, 1 = non-audio */
231 /* Pre-emphasis detect, 0 = OFF, 1 = ON */
235 /* DTS-CD bit audio stream detect, 0 = no detect, 1 = detect */
237 /* Non-PCM bit stream detection, 0 = no detect, 1 = detect */
254 /* CRC for Q-subcode, 0 = no error, 1 = error */