Lines Matching +full:3 +full:b
9 #define PDO_TYPE_APDO 3
95 #define FRS_5V_3A 3
103 * <26> :: modal operation supported (1b == yes)
117 #define IDH_PTYPE_PSD 3
122 #define IDH_PTYPE_PCABLE 3
130 #define IDH_PTYPE_DFP_PB 3
158 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
161 * <7> :: Vconn required (AMA only, 0b == no, 1b == yes)
162 * <6> :: Vbus required (AMA only, 0b == yes, 1b == no)
163 * <5:3> :: Alternate modes
173 #define DEV_USB4_CAPABLE (1 << 3)
177 #define UFP_CAPTIVE 3
183 #define AMA_VCONN_PWR_3W 3
206 #define UFP_USB4_GEN3 3
210 | ((vcpwr) & 0x7) << 8 | (vcr) << 7 | (vbr) << 6 | ((alt) & 0x7) << 3 \
219 * <23:22> :: Connector type (10b == receptacle, 11b == captive plug)
228 #define DFP_CAPTIVE 3
240 * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
243 * <12:11> :: cable termination type (11b == both ends active VCONN req)
244 * <10> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
248 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
249 * <4> :: Vbus through cable (0b == no, 1b == yes)
250 * <3> :: SOP" controller present? (0b == no, 1b == yes)
259 * <19:18> :: Type-C to Type-C/Captive (10b == C, 11b == Captive)
262 * <12:11> :: cable termination type (10b == Vconn not req, 01b == Vconn req)
263 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
265 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
266 * <4:3> :: Reserved, Shall be set to zero
275 * <19:18> :: Connector type (10b == C, 11b == Captive)
278 * <12:11> :: cable termination type (10b == one end active, 11b == both ends active VCONN req)
279 * <10:9> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
280 * <8> :: SBU supported (0b == supported, 1b == not supported)
281 * <7> :: SBU type (0b == passive, 1b == active)
282 * <6:5> :: Vbus current handling capability (01b == 3A, 10b == 5A)
283 * <4> :: Vbus through cable (0b == no, 1b == yes)
284 * <3> :: SOP" controller present? (0b == no, 1b == yes)
289 #define CABLE_VDO_VER1_3 3
295 #define CABLE_CAPTIVE 3
300 #define CABLE_LATENCY_3M 3
311 #define ACABLE_BOTH_END 3
317 #define CABLE_MAX_VBUS_50V 3
339 #define CABLE_USB4_GEN3 3
345 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
354 | (vbt) << 4 | (sopp) << 3 | ((spd) & 0x7))
363 * <11> :: U3 to U0 transition mode (0b == direct, 1b == through U3S)
364 * <10> :: Physical connection (0b == copper, 1b == optical)
365 * <9> :: Active element (0b == redriver, 1b == retimer)
366 * <8> :: USB4 supported (0b == yes, 1b == no)
368 * <5> :: USB2 supported (0b == yes, 1b == no)
369 * <4> :: USB3.2 supported (0b == yes, 1b == no)
370 * <3> :: USB lanes supported (0b == one lane, 1b == two lanes)
371 * <2> :: Optically isolated active cable (0b == no, 1b == yes)
373 * <0> :: USB gen (0b == gen1, 1b == gen2+)
379 #define ACAB2_U3_CLD_1MW 3
407 | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3 \
416 * <11> :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
422 * <3> :: Vbus power required
428 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3 \
432 #define PD_VDO_AMA_VBUS_REQ(vdo) (((vdo) >> 3) & 1)
437 #define AMA_USBSS_BBONLY 3
446 * <16:15> :: Maximum Vbus voltage (00b == 20V, 01b == 30V, 10b == 40V, 11b == 50V)
447 * <14> :: Charge through current support (0b == 3A, 1b == 5A)
451 * <0> :: Charge through support (0b == no, 1b == yes)
457 #define VPD_MAX_VBUS_50V 3