Lines Matching +full:touch +full:- +full:keys

1 /* SPDX-License-Identifier: GPL-2.0-only WITH Linux-syscall-note */
6  * This file is not only included from C-code but also from devicetree source
9  * Copyright (c) 1999-2002 Vojtech Pavlik
26 #define INPUT_PROP_SEMI_MT		0x03	/* touch rectangle only */
66  * Keys and buttons
68  * Most of the keys/buttons are modeled after USB HUT 1.12
71  * AC - Application Control
72  * AL - Application Launch Button
73  * SC - System Control
308 					   outputs (Monitor/LCD/TV-out/etc) */
513 #define KEY_FRAMEBACK		0x1b4	/* Consumer - transport controls */
515 #define KEY_CONTEXT_MENU	0x1b6	/* GenDesc - system context menu */
516 #define KEY_MEDIA_REPEAT	0x1b7	/* Consumer - transport control */
518 #define KEY_10CHANNELSDOWN	0x1b9	/* 10 channels down (10-) */
576 #define KEY_NUMERIC_A		0x20c	/* Phone key A - HUT Telephony 0xb9 */
621 #define KEY_ASSISTANT		0x247	/* AL Context-aware desktop assistant */
629 #define KEY_DO_NOT_DISTURB		0x24f	/* Toggles the system-wide "Do Not Disturb" control (HUTRR94)*/
636  * laptops on/off. Note when the embedded-controller turns on/off the eprivacy
638  * https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties
653 /* Diagonal movement keys */
697 /* Shortcut Keys */
712  * Some keyboards have keys which do not have a defined meaning, these keys
714  * keyboards with these macro-keys the key-sequence to inject, or action to
716  * point of view these are just normal keys.
718  * The KEY_MACRO# codes below are intended for such keys, which may be labeled
719  * e.g. G1-G18, or S1 - S30. The KEY_MACRO# codes MUST NOT be used for keys
758  * Some keyboards with the macro-keys described above have some extra keys
759  * for controlling the host-side software responsible for the macro handling:
760  * -A macro recording start/stop key. Note that not all keyboards which emit
764  * -Keys for switching between different macro (pre)sets, either a key for
765  *  cycling through the configured presets or keys to directly select a preset.
776  * by the host. Often these have a number of keys directly below the LCD
777  * intended for controlling a menu shown on the LCD. These keys often don't
786 /* Performance Boost key (Alienware)/G-Mode key (Dell) */
831 /* We avoid low common keys in module aliases so they don't get huge. */
912 #define ABS_MT_POSITION_X	0x35	/* Center X touch position */
913 #define ABS_MT_POSITION_Y	0x36	/* Center Y touch position */