Lines Matching +full:pxa3xx +full:- +full:gpio
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
252 is based on the KS-108 lcd controller and is typically a matrix
254 driver supports it for use with x86 SBCs through a 16 bit GPIO
257 GPIO IO address to be used for setting control and data.
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
437 bool "EFI-based Framebuffer Support"
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
688 Because fbdev-2.6 requires that drivers must be able to
735 Because fbdev-2.6 requires that drivers must be able to
771 This driver supports the on-board graphics built in to the Intel 810
793 monitor is recommended, but can still work with non-compliant ones.
871 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
892 interconnects Matrox optional devices, like MGA-TVO on G200 and
897 second head of G400 or MGA-TVO on G200 or G400.
900 i2c-matroxfb.
910 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
911 head is not compatible with accelerated XFree 3.3.x SVGA servers -
919 also load i2c-matroxfb to get it to run.
923 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
950 https://products.amd.com/en-us/GraphicCardResult.aspx
1017 Say Y here to support use of ATI's 64-bit Rage boards (or other
1096 Because fbdev-2.6 requires that drivers must be able to
1215 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1225 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1374 bool "Wondermedia WM8xxx-series frame buffer support"
1384 This is the framebuffer driver for WonderMedia WM8xxx-series
1408 tristate "PMAG-AA TURBOchannel framebuffer support"
1412 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1413 used mainly in the MIPS-based DECstation series.
1416 tristate "PMAG-BA TURBOchannel framebuffer support"
1420 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1421 used mainly in the MIPS-based DECstation series.
1424 tristate "PMAGB-B TURBOchannel framebuffer support"
1428 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1429 in the MIPS-based DECstation series. The card is currently only
1447 Olivetti M700-10 systems.
1454 Say Y here if you want to support the built-in frame buffer of
1463 Frame buffer driver for the built-in LCD controller in the Marvell
1473 Frame buffer driver for the built-in LCD controller in the Intel
1484 bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
1485 depends on FB_PXA && (PXA27x || PXA3xx)
1508 tristate "PXA3xx 2D graphics accelerator driver"
1512 found on PXA3xx processors. There is a counterpart driver in the
1535 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1543 Frame buffer driver for the built-in FB controller in the Samsung
1583 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1584 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1596 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1597 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1690 This driver implements the front-end of the Xen virtual
1691 frame buffer driver. It communicates with a back-end
1695 tristate "E-Ink Metronome/8track controller support"
1699 This driver implements support for the E-Ink Metronome
1700 controller. The pre-release name for this device was 8track
1701 and could also have been called by some vendors as PVI-nnnn.
1709 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1716 bool "Carmine/Coral-P(A) GDC"
1719 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1738 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1749 ep93xx-fb.
1759 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1763 This driver implements support for the E-Ink Broadsheet
1769 tristate "Microsoft Hyper-V Synthetic Video support"
1774 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.