Lines Matching +full:lcd +full:- +full:controller
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
127 tristate "CLPS711X LCD support"
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
150 tristate "Freescale i.MX1/21/25/27 LCD support"
247 tristate "Arc Monochrome LCD board support"
251 This enables support for the Arc Monochrome LCD board. The board
252 is based on the KS-108 lcd controller and is typically a matrix
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
437 bool "EFI-based Framebuffer Support"
453 This enables support for the Apollo display controller in its
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
624 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
628 This enables support for the OpenCores VGA/LCD core.
630 The OpenCores VGA/LCD core is typically used together with
650 tristate "AT91 LCD Controller support"
659 This enables support for the AT91 LCD Controller.
688 Because fbdev-2.6 requires that drivers must be able to
736 Because fbdev-2.6 requires that drivers must be able to
774 This driver supports the on-board graphics built in to the Intel 810
796 monitor is recommended, but can still work with non-compliant ones.
874 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
895 interconnects Matrox optional devices, like MGA-TVO on G200 and
900 second head of G400 or MGA-TVO on G200 or G400.
903 i2c-matroxfb.
913 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
914 head is not compatible with accelerated XFree 3.3.x SVGA servers -
922 also load i2c-matroxfb to get it to run.
926 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1018 Say Y here to support use of ATI's 64-bit Rage boards (or other
1024 bool "Mach64 generic LCD support"
1100 Because fbdev-2.6 requires that drivers must be able to
1219 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1229 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1347 bool "Au1100 LCD Driver"
1356 bool "Au1200/Au1300 LCD Driver"
1374 This is the framebuffer driver for VIA VT8500 integrated LCD
1375 controller.
1378 bool "Wondermedia WM8xxx-series frame buffer support"
1388 This is the framebuffer driver for WonderMedia WM8xxx-series
1389 integrated LCD controller. This driver covers the WM8505, WM8650
1408 This is the frame buffer device driver for the Hitachi HD64461 LCD
1412 tristate "PMAG-AA TURBOchannel framebuffer support"
1416 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1417 used mainly in the MIPS-based DECstation series.
1420 tristate "PMAG-BA TURBOchannel framebuffer support"
1424 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1425 used mainly in the MIPS-based DECstation series.
1428 tristate "PMAGB-B TURBOchannel framebuffer support"
1432 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1433 in the MIPS-based DECstation series. The card is currently only
1451 Olivetti M700-10 systems.
1458 Say Y here if you want to support the built-in frame buffer of
1462 tristate "PXA168/910 LCD framebuffer support"
1467 Frame buffer driver for the built-in LCD controller in the Marvell
1471 tristate "PXA LCD framebuffer support"
1477 Frame buffer driver for the built-in LCD controller in the Intel
1492 bool "PXA Smartpanel LCD support"
1496 bool "PXA LCD command line parameters"
1500 to configure the physical properties of the LCD panel when
1501 using the PXA LCD driver.
1515 Kernelspace driver for the 2D graphics controller unit (GCU)
1540 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1548 Frame buffer driver for the built-in FB controller in the Samsung
1571 Frame buffer driver for the CRT and LCD controllers in the Silicon
1588 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1589 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1601 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1602 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1639 framebuffer. ML300 carries a 640*480 LCD display on the board,
1651 tristate "Cobalt server LCD frame buffer support"
1662 (D)STN/TFT LCD Controller.
1695 This driver implements the front-end of the Xen virtual
1696 frame buffer driver. It communicates with a back-end
1700 tristate "E-Ink Metronome/8track controller support"
1704 This driver implements support for the E-Ink Metronome
1705 controller. The pre-release name for this device was 8track
1706 and could also have been called by some vendors as PVI-nnnn.
1714 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1721 bool "Carmine/Coral-P(A) GDC"
1724 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1725 PCI graphics controller devices.
1743 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1744 driver to support accessing I2C devices on controller's I2C bus.
1754 ep93xx-fb.
1764 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1768 This driver implements support for the E-Ink Broadsheet
1769 controller. The release name for this device was Epson S1D13521
1774 tristate "Microsoft Hyper-V Synthetic Video support (DEPRECATED)"
1779 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1781 This driver is deprecated, please use the Hyper-V DRM driver at
1791 Say Y if you want support for a simple frame-buffer.
1795 pre-allocated frame buffer surface.
1809 OLED controller over I2C.