Lines Matching +full:vga +full:- +full:format
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
164 VGA chips used in the Rebel.com Netwinder and other machines.
184 Integraphics CyberPro 20x0 and 5000 VGA chips. This is used
252 is based on the KS-108 lcd controller and is typically a matrix
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
344 This is the frame buffer device driver for VGA 16 color graphic
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
408 tristate "Userspace VESA VGA graphics support"
425 bool "VESA VGA graphics support"
437 bool "EFI-based Framebuffer Support"
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
624 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
628 This enables support for the OpenCores VGA/LCD core.
630 The OpenCores VGA/LCD core is typically used together with
688 Because fbdev-2.6 requires that drivers must be able to
736 Because fbdev-2.6 requires that drivers must be able to
774 This driver supports the on-board graphics built in to the Intel 810
796 monitor is recommended, but can still work with non-compliant ones.
874 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
895 interconnects Matrox optional devices, like MGA-TVO on G200 and
900 second head of G400 or MGA-TVO on G200 or G400.
903 i2c-matroxfb.
913 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
914 head is not compatible with accelerated XFree 3.3.x SVGA servers -
922 also load i2c-matroxfb to get it to run.
926 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
949 don't need to choose this to run the Radeon in plain VGA mode.
952 https://products.amd.com/en-us/GraphicCardResult.aspx
1021 Say Y here to support use of ATI's 64-bit Rage boards (or other
1102 Because fbdev-2.6 requires that drivers must be able to
1221 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1231 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1380 bool "Wondermedia WM8xxx-series frame buffer support"
1390 This is the framebuffer driver for WonderMedia WM8xxx-series
1414 tristate "PMAG-AA TURBOchannel framebuffer support"
1418 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1419 used mainly in the MIPS-based DECstation series.
1422 tristate "PMAG-BA TURBOchannel framebuffer support"
1426 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1427 used mainly in the MIPS-based DECstation series.
1430 tristate "PMAGB-B TURBOchannel framebuffer support"
1434 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1435 in the MIPS-based DECstation series. The card is currently only
1453 Olivetti M700-10 systems.
1460 Say Y here if you want to support the built-in frame buffer of
1469 Frame buffer driver for the built-in LCD controller in the Marvell
1479 Frame buffer driver for the built-in LCD controller in the Intel
1542 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1550 Frame buffer driver for the built-in FB controller in the Samsung
1590 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1591 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1603 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1604 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1642 ML403 uses a standard DB15 VGA connector.
1697 This driver implements the front-end of the Xen virtual
1698 frame buffer driver. It communicates with a back-end
1702 tristate "E-Ink Metronome/8track controller support"
1706 This driver implements support for the E-Ink Metronome
1707 controller. The pre-release name for this device was 8track
1708 and could also have been called by some vendors as PVI-nnnn.
1716 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1723 bool "Carmine/Coral-P(A) GDC"
1726 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1745 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1756 ep93xx-fb.
1766 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1770 This driver implements support for the E-Ink Broadsheet
1776 tristate "Microsoft Hyper-V Synthetic Video support"
1781 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1790 Say Y if you want support for a simple frame-buffer.
1794 pre-allocated frame buffer surface.
1796 Configuration re: surface address, size, and format must be provided