Lines Matching +full:pci +full:- +full:based
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
73 depends on FB && (ZORRO || PCI)
79 This enables support for Cirrus Logic GD542x/543x based boards on
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
92 depends on FB && ((AMIGA && BROKEN) || PCI)
98 This is the frame buffer device driver for cards based on
102 ELSA Gloria Synergy PCI
103 Appian Jeronimo PRO (both heads) PCI
104 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
113 depends on FB_PM2 && PCI
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
160 depends on FB && PCI && HAS_IOPORT && (BROKEN || !SPARC64)
252 is based on the KS-108 lcd controller and is typically a matrix
272 depends on FB && PPC && (!PPC_PSERIES || PCI)
310 depends on (FB = y) && PPC32 && PCI
318 depends on (FB = y) && PCI
325 depends on (FB = y) && PCI
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
386 depends on PCI || TC
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
437 bool "EFI-based Framebuffer Support"
490 Say Y if you want support for SBUS or UPA based frame buffer device.
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
567 depends on (FB = y) && PCI && SPARC64
573 This is the framebuffer device for the Sun XVR-500 and similar
574 graphics cards based upon the 3DLABS Wildcat chipset. The driver
580 bool "Sun XVR-2500 3DLABS Wildcat support"
581 depends on (FB = y) && PCI && SPARC64
584 This is the framebuffer device for the Sun XVR-2500 and similar
585 graphics cards based upon the 3DLABS Wildcat chipset. The driver
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
663 depends on FB && PCI && HAS_IOPORT
688 Because fbdev-2.6 requires that drivers must be able to
711 depends on FB && PCI
736 Because fbdev-2.6 requires that drivers must be able to
759 depends on FB && PCI
765 This driver supports graphics cards based on Intel740 chip.
769 depends on FB && PCI && X86_32 && AGP_INTEL
774 This driver supports the on-board graphics built in to the Intel 810
796 monitor is recommended, but can still work with non-compliant ones.
818 depends on FB && PCI
862 Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
874 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
895 interconnects Matrox optional devices, like MGA-TVO on G200 and
900 second head of G400 or MGA-TVO on G200 or G400.
903 i2c-matroxfb.
913 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
914 head is not compatible with accelerated XFree 3.3.x SVGA servers -
922 also load i2c-matroxfb to get it to run.
926 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
939 depends on FB && PCI
948 a framebuffer device. There are both PCI and AGP versions. You
952 https://products.amd.com/en-us/GraphicCardResult.aspx
981 depends on FB && PCI
1002 tristate "ATI Mach64 display support" if PCI || ATARI
1009 select FB_ATY_CT if SPARC64 && PCI
1019 depends on PCI && FB_ATY
1021 Say Y here to support use of ATI's 64-bit Rage boards (or other
1022 boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1034 bool "Mach64 GX support" if PCI
1039 board (or other boards based on the Mach64 GX chipset) as a
1055 depends on FB && PCI && HAS_IOPORT
1077 depends on FB && PCI
1085 This driver supports notebooks and computers with S3 Savage PCI/AGP
1102 Because fbdev-2.6 requires that drivers must be able to
1116 depends on FB && PCI && HAS_IOPORT
1147 depends on FB && PCI && GPIOLIB && I2C && HAS_IOPORT && (X86 || COMPILE_TEST)
1186 depends on FB && PCI && HAS_IOPORT
1194 This driver supports notebooks with NeoMagic PCI chips.
1202 depends on FB && PCI
1205 Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1213 depends on FB && PCI && HAS_IOPORT
1221 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1231 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1244 depends on FB && PCI
1248 Voodoo2 (cvg) based graphics card.
1260 depends on FB && PCI && HAS_IOPORT
1275 depends on FB && PCI && HAS_IOPORT
1283 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1298 depends on FB && PCI && HAS_IOPORT
1308 Driver for PCI graphics boards with ARK 2000PV chip
1313 depends on FB && PCI
1326 depends on FB && PCI
1380 bool "Wondermedia WM8xxx-series frame buffer support"
1390 This is the framebuffer driver for WonderMedia WM8xxx-series
1414 tristate "PMAG-AA TURBOchannel framebuffer support"
1418 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1419 used mainly in the MIPS-based DECstation series.
1422 tristate "PMAG-BA TURBOchannel framebuffer support"
1426 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1427 used mainly in the MIPS-based DECstation series.
1430 tristate "PMAGB-B TURBOchannel framebuffer support"
1434 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1435 in the MIPS-based DECstation series. The card is currently only
1453 Olivetti M700-10 systems.
1460 Say Y here if you want to support the built-in frame buffer of
1469 Frame buffer driver for the built-in LCD controller in the Marvell
1479 Frame buffer driver for the built-in LCD controller in the Intel
1542 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1550 Frame buffer driver for the built-in FB controller in the Samsung
1590 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1591 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1603 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1604 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1613 GXT4500P/6500P display adaptor based on Raster Engine RC1000,
1697 This driver implements the front-end of the Xen virtual
1698 frame buffer driver. It communicates with a back-end
1702 tristate "E-Ink Metronome/8track controller support"
1706 This driver implements support for the E-Ink Metronome
1707 controller. The pre-release name for this device was 8track
1708 and could also have been called by some vendors as PVI-nnnn.
1713 depends on PCI || (OF && PPC)
1716 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1723 bool "Carmine/Coral-P(A) GDC"
1724 depends on PCI
1726 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1727 PCI graphics controller devices.
1745 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1756 ep93xx-fb.
1766 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1770 This driver implements support for the E-Ink Broadsheet
1776 tristate "Microsoft Hyper-V Synthetic Video support"
1781 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1790 Say Y if you want support for a simple frame-buffer.
1794 pre-allocated frame buffer surface.
1812 depends on FB && PCI && HAS_IOPORT