Lines Matching +full:lcd +full:- +full:rst
1 # SPDX-License-Identifier: GPL-2.0-only
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
21 On several non-X86 architectures, the frame buffer device is the
28 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 are compiling a kernel for a non-x86 architecture.
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
85 Please read the file <file:Documentation/fb/cirrusfb.rst>.
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
123 hardware found in Acorn RISC PCs and other ARM-based machines. If
127 tristate "CLPS711X LCD support"
138 bool "SA-1100 LCD support"
142 This is a framebuffer device for the SA-1100 LCD Controller.
143 See <http://www.linux-fbdev.org/> for information on framebuffer
146 If you plan to use the LCD display with your SA-1100 system, say
150 tristate "Freescale i.MX1/21/25/27 LCD support"
247 tristate "Arc Monochrome LCD board support"
251 This enables support for the Arc Monochrome LCD board. The board
252 is based on the KS-108 lcd controller and is typically a matrix
330 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
334 tristate "VGA 16-color graphics support"
395 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
396 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
397 TURBOchannel cards, also known as PMAGD-A, -B and -C.
399 Due to hardware limitations ZLX-E2 and E3 cards are not supported
403 you manage to get it going. ;-)
420 <file:Documentation/fb/uvesafb.rst> for more information.
434 read <file:Documentation/fb/vesafb.rst>. If unsure, say Y.
437 bool "EFI-based Framebuffer Support"
562 This is the frame buffer device driver for the SBUS-based Sun ZX
566 bool "Sun XVR-500 3DLABS Wildcat support"
573 This is the framebuffer device for the Sun XVR-500 and similar
580 bool "Sun XVR-2500 3DLABS Wildcat support"
584 This is the framebuffer device for the Sun XVR-2500 and similar
591 bool "Sun XVR-1000 support"
595 This is the framebuffer device for the Sun XVR-1000 and similar
621 <file:Documentation/fb/pvr2fb.rst>.
624 tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
628 This enables support for the OpenCores VGA/LCD core.
630 The OpenCores VGA/LCD core is typically used together with
650 tristate "AT91 LCD Controller support"
659 This enables support for the AT91 LCD Controller.
690 Because fbdev-2.6 requires that drivers must be able to
738 Because fbdev-2.6 requires that drivers must be able to
776 This driver supports the on-board graphics built in to the Intel 810
783 <file:Documentation/fb/intel810.rst>
798 monitor is recommended, but can still work with non-compliant ones.
838 are described in <file:Documentation/fb/matroxfb.rst>.
876 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
897 interconnects Matrox optional devices, like MGA-TVO on G200 and
902 second head of G400 or MGA-TVO on G200 or G400.
905 i2c-matroxfb.
915 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
916 head is not compatible with accelerated XFree 3.3.x SVGA servers -
924 also load i2c-matroxfb to get it to run.
928 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
986 <file:Documentation/fb/aty128fb.rst>.
1020 Say Y here to support use of ATI's 64-bit Rage boards (or other
1026 bool "Mach64 generic LCD support"
1102 Because fbdev-2.6 requires that drivers must be able to
1221 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1231 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1255 Please read the <file:Documentation/fb/sstfb.rst> for supported
1289 For more information, read <file:Documentation/fb/tridentfb.rst>
1349 bool "Au1100 LCD Driver"
1359 bool "Au1200/Au1300 LCD Driver"
1377 This is the framebuffer driver for VIA VT8500 integrated LCD
1381 bool "Wondermedia WM8xxx-series frame buffer support"
1391 This is the framebuffer driver for WonderMedia WM8xxx-series
1392 integrated LCD controller. This driver covers the WM8505, WM8650
1411 This is the frame buffer device driver for the Hitachi HD64461 LCD
1415 tristate "PMAG-AA TURBOchannel framebuffer support"
1419 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1420 used mainly in the MIPS-based DECstation series.
1423 tristate "PMAG-BA TURBOchannel framebuffer support"
1427 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1428 used mainly in the MIPS-based DECstation series.
1431 tristate "PMAGB-B TURBOchannel framebuffer support"
1435 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1436 in the MIPS-based DECstation series. The card is currently only
1454 Olivetti M700-10 systems.
1461 Say Y here if you want to support the built-in frame buffer of
1465 tristate "PXA168/910 LCD framebuffer support"
1470 Frame buffer driver for the built-in LCD controller in the Marvell
1474 tristate "PXA LCD framebuffer support"
1480 Frame buffer driver for the built-in LCD controller in the Intel
1486 say M here and read <file:Documentation/kbuild/modules.rst>.
1495 bool "PXA Smartpanel LCD support"
1499 bool "PXA LCD command line parameters"
1503 to configure the physical properties of the LCD panel when
1504 using the PXA LCD driver.
1512 <file:Documentation/fb/pxafb.rst> describes the available parameters.
1543 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1551 Frame buffer driver for the built-in FB controller in the Samsung
1574 Frame buffer driver for the CRT and LCD controllers in the Silicon
1580 say M here and read <file:Documentation/kbuild/modules.rst>.
1591 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1592 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1604 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1605 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1642 framebuffer. ML300 carries a 640*480 LCD display on the board,
1654 tristate "Cobalt server LCD frame buffer support"
1665 (D)STN/TFT LCD Controller.
1698 This driver implements the front-end of the Xen virtual
1699 frame buffer driver. It communicates with a back-end
1703 tristate "E-Ink Metronome/8track controller support"
1707 This driver implements support for the E-Ink Metronome
1708 controller. The pre-release name for this device was 8track
1709 and could also have been called by some vendors as PVI-nnnn.
1717 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1724 bool "Carmine/Coral-P(A) GDC"
1727 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1746 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1757 ep93xx-fb.
1767 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1771 This driver implements support for the E-Ink Broadsheet
1783 Say Y if you want support for a simple frame-buffer.
1787 pre-allocated frame buffer surface.
1813 here and read <file:Documentation/kbuild/modules.rst>.