Lines Matching +full:layer +full:- +full:base +full:- +full:offset

1 /* SPDX-License-Identifier: GPL-2.0 */
3  * mtu3.h - MediaTek USB3 DRD header
35 #define	MU3D_EP_TXCR0(epnum)	(U3D_TX1CSR0 + (((epnum) - 1) * 0x10))
36 #define	MU3D_EP_TXCR1(epnum)	(U3D_TX1CSR1 + (((epnum) - 1) * 0x10))
37 #define	MU3D_EP_TXCR2(epnum)	(U3D_TX1CSR2 + (((epnum) - 1) * 0x10))
39 #define	MU3D_EP_RXCR0(epnum)	(U3D_RX1CSR0 + (((epnum) - 1) * 0x10))
40 #define	MU3D_EP_RXCR1(epnum)	(U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
41 #define	MU3D_EP_RXCR2(epnum)	(U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
43 #define USB_QMU_TQHIAR(epnum)	(U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
44 #define USB_QMU_RQHIAR(epnum)	(U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
46 #define USB_QMU_RQCSR(epnum)	(U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
47 #define USB_QMU_RQSAR(epnum)	(U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
48 #define USB_QMU_RQCPR(epnum)	(U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
50 #define USB_QMU_TQCSR(epnum)	(U3D_TXQCSR1 + (((epnum) - 1) * 0x10))
51 #define USB_QMU_TQSAR(epnum)	(U3D_TXQSAR1 + (((epnum) - 1) * 0x10))
52 #define USB_QMU_TQCPR(epnum)	(U3D_TXQCPR1 + (((epnum) - 1) * 0x10))
112  * @MU3D_EP0_STATE_STALL: ep0 is in stall status, will be auto-cleared
137  * @base: the base address of fifo
142 	u32 base;  member
182 * dma: physical base address of GPD segment
183 * start: virtual base address of GPD segment
204 * @role_sw : use USB Role Switch to support dual-role switch, can't use
207 * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
208 * @manual_drd_enabled: it's true when supports dual-role device by debugfs
225  * @mac_base: register base address of device MAC, exclude xHCI's
226  * @ippc_base: register base address of IP Power and Clock interface (IPPC)
229  *		host only, device only or dual-role mode
234  *		but when use dual-role mode, can't disable u2port0
237  * @dbgfs_root: only used when supports manual dual-role switch via debugfs
239  * @uwk: syscon including usb wakeup glue layer between SSUSB IP and SPM
240  * @uwk_reg_base: the base address of the wakeup glue layer in @uwk
241  * @uwk_vers: the version of the wakeup glue layer
311  * struct mtu3 - device driver instance data.
387 	return list_first_entry_or_null(&mep->req_list, struct mtu3_request,  in next_request()
391 static inline void mtu3_writel(void __iomem *base, u32 offset, u32 data)  in mtu3_writel()  argument
393 	writel(data, base + offset);  in mtu3_writel()
396 static inline u32 mtu3_readl(void __iomem *base, u32 offset)  in mtu3_readl()  argument
398 	return readl(base + offset);  in mtu3_readl()
401 static inline void mtu3_setbits(void __iomem *base, u32 offset, u32 bits)  in mtu3_setbits()  argument
403 	void __iomem *addr = base + offset;  in mtu3_setbits()
409 static inline void mtu3_clrbits(void __iomem *base, u32 offset, u32 bits)  in mtu3_clrbits()  argument
411 	void __iomem *addr = base + offset;  in mtu3_clrbits()