Lines Matching refs:you
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
27 an Integrator/AP or Integrator/PP2 platform, or if you have a
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
41 Even if you say Y here, the currently visible framebuffer console
43 you can alter that using a kernel command line option such as
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
69 Even if you say Y here, the currently visible framebuffer console
71 you can alter that using a kernel command line option such as
121 If you say Y here, it will be possible to use a serial port as the
145 Say Y here if you wish to use an on-chip UART on a Atmel
155 Say Y here if you wish to use the PDC to do DMA transfers to
169 Say Y here if you wish to have the internal AT91 UARTs
172 64). This is necessary if you also want other UARTs, such as
177 To use this, you should create suitable ttyATn device nodes in
180 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
196 Say Y here if you wish to use a Amlogic MesonX UART as the
215 Even if you say Y here, the currently visible virtual console
217 you can alter that using a kernel command line option such as
230 Choose Y/M here only if you build for such SoC.
249 Even if you say Y here, the currently visible virtual console
251 you can alter that using a kernel command line option such as
282 If you say Y here, it will be possible to use a the Tegra TCU as the
305 If you say Y here, it will be possible to use a Tegra UTC client as
320 Say Y here if you want to support these ICs.
334 Say Y here if you want to support this ICs.
351 If you say Y here, it will be possible to use a serial port as the
381 If you say Y here, it will be possible to use a serial port as the
396 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
397 PCI bridge you can enable its onboard serial port by enabling this
405 If you have enabled the serial port on the 21285 footbridge you can
408 Even if you say Y here, the currently visible virtual console
410 you can alter that using a kernel command line option such as
426 If you have a machine based on an Intel XScale PXA2xx CPU you
429 Unless you have a specific need, you should use SERIAL_8250_PXA
438 If you have enabled the serial port on the Intel XScale PXA
439 CPU you can make it the console by answering Y to this option.
441 Even if you say Y here, the currently visible virtual console
443 you can alter that using a kernel command line option such as
448 Unless you have a specific need, you should use SERIAL_8250_PXA
457 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
467 If you have enabled the serial port on the SA1100/SA1110 StrongARM
468 CPU you can make it the console by answering Y to this option.
470 Even if you say Y here, the currently visible virtual console
472 you can alter that using a kernel command line option such as
484 If you have a machine based on a Motorola IMX CPU you
492 If you have enabled the serial port on the Freescale IMX
493 CPU you can make it the console by answering Y to this option.
495 Even if you say Y here, the currently visible virtual console
497 you can alter that using a kernel command line option such as
510 If you have enabled the earlycon on the Freescale IMX
511 CPU you can make it the earlycon by answering Y to this option.
518 Say Y here if you want to use the Xilinx uartlite serial controller.
529 Say Y here if you wish to use a Xilinx uartlite as the system
540 you think you might implement.
557 systems. Say Y or M if you want to be able to these serial ports.
563 If you would like to be able to use the Zilog8530 serial port
564 on your Sparc system as the console, you can do so by answering
572 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
579 If you would like to be able to use the SU serial port
580 on your Sparc system as the console, you can do so by answering
598 3. Add device ttyB0 to /etc/securetty (if you want to log on as
613 (PCI) UltraSPARC systems. Say Y or M if you want to be able to these
620 If you would like to be able to use the SAB82532 serial port
621 on your Sparc system as the console, you can do so by answering
629 systems. Say Y if you want to be able to use this device.
637 systems. Say Y or M if you want to be able to these serial ports.
682 Say Y if you want to be able to use the RZ/T2H SCI serial port.
700 If you would like to be able to use one of the high speed serial
701 ports on the LPC32XX as the console, you can do so by answering
725 This setting lets you define what the default baudrate is for the
743 Say Y or M if you want to be able to these serial ports.
752 the two drivers being unable to coexist; you could not use
762 If you enable this option, any z85c30 ports in the system will
763 be registered as ttyS0 onwards as in the past, and you will be
767 Say N unless you need the z85c30 ports on your (Power)Mac
775 If you would like to be able to use the z85c30 serial port
776 on your (Power)Mac as the console, you can do so by answering
792 Say Y here if you wish to use a SCC or SMC CPM UART as the system
796 Even if you say Y here, the currently visible framebuffer console
798 you can alter that using a kernel command line option such as
808 If you have a PIC32, this driver supports the serial ports.
819 If you have a PIC32, this driver supports the putting a console on one
829 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
830 like to use them, you must answer Y or M to this option. Note that
839 Select this options if you'd like to use one of the PSC serial port
899 If you have a card like this, say Y here, otherwise say N.
935 Set this to the maximum number of serial ports you want the driver
953 If you have a machine based on an Texas Instruments OMAP CPU you
956 By enabling this option you take advantage of dma feature available
965 Select this option if you would like to use omap serial port as
968 Even if you say Y here, the currently visible virtual console
970 you can alter that using a kernel command line option such as
981 Select this option if you are building a kernel for a device that
992 Select this option if you would like to use a SiFive UART as the
995 Even if you say Y here, the currently visible virtual console
997 you can alter that using a kernel command line option such as
1017 Select this option if you would like to use a Lantiq UART as the
1098 If you have enabled the serial port on the BCM63xx CPU
1099 you can make it the console by answering Y to this option.
1148 This setting lets you define the maximum number of the Altera
1157 This setting lets you define what the default baudrate is for the
1190 Say Y here if you wish to use the PCH UART as the system console
1232 If you have an Atheros AR933X SOC based board and want to use the
1250 Set this to the number of serial ports you want the driver
1287 Set this to the number of serial ports you want the driver
1303 If you want to compile this driver into the kernel, say Y here. If
1304 you don't have a suitable RocketPort card installed, say N.
1327 If you have enabled the lpuart serial port on the Freescale SoCs,
1328 you can make it the console by answering Y to this option.
1343 If you have enabled the LINFlexD UART serial port on the Freescale
1344 SoCs, you can make it the console by answering Y to this option.
1358 If you have enabled the USART serial port on Conexant Digicolor
1359 SoCs, you can make it the console by answering Y to this option.
1432 This driver is for Marvell EBU SoC's UART. If you have a machine
1445 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1456 Say 'Y' here if you wish to use the on-board serial port.
1466 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1475 Say 'Y' here if you wish to use the on-board serial port.
1485 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1509 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut
1524 Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
1532 Set this to the maximum number of serial ports you want the driver
1541 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1552 Select this option if you would like to use Sunplus serial port on
1554 If you enable this option, Sunplus serial ports in the system will
1565 Select this option if you would like to use a Sunplus UART as the
1567 Even if you say Y here, the currently visible virtual console
1569 you can alter that using a kernel command line option such as
1577 This driver supports Nuvoton MA35D1 family UART ports. If you would
1578 like to use them, you must answer Y or M to this option. Note that
1580 module. If you enable this option, Ma35D1 serial ports in the system
1588 Select this options if you'd like to use the UART port0 of the
1590 Even if you say Y here, the currently visible virtual console
1592 but you can alter that using a kernel command line option such as