Lines Matching refs:serial
14 the console before standard serial driver is probed. The console is
17 source "drivers/tty/serial/8250/Kconfig"
19 comment "Non-8250 serial port support"
22 tristate "ARM AMBA PL010 serial port support"
33 bool "Support for console on AMBA serial port"
49 tristate "ARM AMBA PL011 serial port support"
60 bool "Support for console on AMBA serial port"
84 This enables the console before standard serial driver is probed.
96 the console before standard serial driver is probed. This is enabled
101 tristate "BCM1xxx on-chip DUART serial support"
106 Support for the asynchronous serial interface (DUART) included in
116 bool "Support for console on a BCM1xxx DUART serial port"
121 If you say Y here, it will be possible to use a serial port as the
129 bool "AT91 on-chip serial port support"
140 bool "Support for console on AT91 serial port"
151 bool "Support DMA transfers on AT91 serial port"
156 and from the Atmel AT91 serial port. In order to
174 The ttySn nodes are legally reserved for the 8250 serial driver
175 but are often misused by other serial drivers.
183 tristate "Meson serial port support"
202 tristate "CLPS711X serial port support"
211 bool "Support for console on CLPS711X serial port"
221 tristate "Samsung SoC serial support"
228 these ports, depending on how the serial port pins are configured.
238 serial driver
241 bool "Support for console on Samsung SoC serial port"
246 Allow selection of the S3C24XX on-board serial ports for use as
257 tristate "NVIDIA Tegra20/30 SoC serial controller"
263 provide all of these ports, depending on how the serial port
273 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
274 TCU is a virtual serial port that allows multiplexing multiple data
275 streams into a single hardware serial port.
278 bool "Support for console on a Tegra TCU serial port"
295 Support for Tegra UTC (UART Trace controller) client serial port.
297 UTC is a HW based serial port that allows multiplexing multiple data
298 streams of up to 16 UTC clients into a single hardware serial port.
301 bool "Support for console on a Tegra UTC serial port"
338 bool "DECstation DZ serial driver"
343 DZ11-family serial controllers for DECstations and VAXstations,
347 bool "Support console on DECstation DZ serial driver"
352 If you say Y here, it will be possible to use a serial port as the
357 Note that the firmware uses ttyS3 as the serial console on
363 tristate "DECstation Z85C30 serial support"
368 Support for the Zilog 85C350 serial communications controller used
369 for serial ports in newer DECstation systems. These include the
377 bool "Support for console on a DECstation Z85C30 serial port"
382 If you say Y here, it will be possible to use a serial port as the
387 Note that the firmware uses ttyS1 as the serial console on the
393 tristate "DC21285 serial port support"
398 PCI bridge you can enable its onboard serial port by enabling this
402 bool "Console on DC21285 serial port"
406 If you have enabled the serial port on the 21285 footbridge you can
417 bool "PXA serial port support (DEPRECATED)"
424 can enable its onboard serial ports by enabling this option.
434 bool "Console on PXA serial port (DEPRECATED)"
439 If you have enabled the serial port on the Intel XScale PXA
453 bool "SA1100 serial port support"
459 can enable its onboard serial port by enabling this option.
464 bool "Console on SA1100 serial port"
468 If you have enabled the serial port on the SA1100/SA1110 StrongARM
479 tristate "IMX serial port support"
486 can enable its onboard serial port by enabling this option.
489 tristate "Console on IMX serial port"
493 If you have enabled the serial port on the Freescale IMX
503 bool "Earlycon on IMX serial port"
515 tristate "Xilinx uartlite serial port support"
519 Say Y here if you want to use the Xilinx uartlite serial controller.
525 bool "Support for console on Xilinx uartlite serial port"
535 int "Maximum number of uartlite serial ports"
542 If maximum number of uartlite serial ports is more than 4, then the
554 tristate "Sun Zilog8530 serial support"
557 This driver supports the Zilog8530 serial ports found on many Sparc
558 systems. Say Y or M if you want to be able to these serial ports.
561 bool "Console on Sun Zilog8530 serial port"
564 If you would like to be able to use the Zilog8530 serial port
569 tristate "Sun SU serial support"
572 This driver supports the 8250 serial ports that run the keyboard and
574 to these serial ports.
577 bool "Console on Sun SU serial port"
580 If you would like to be able to use the SU serial port
590 Saying Y here will enable the hardware MUX serial driver for
604 bool "Support for console on serial MUX"
610 tristate "Sun Siemens SAB82532 serial support"
613 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
615 serial ports.
618 bool "Console on Sun Siemens SAB82532 serial port"
621 If you would like to be able to use the SAB82532 serial port
633 tristate "SGI Zilog8530 serial support"
637 This driver supports the Zilog8530 serial ports found on SGI
638 systems. Say Y or M if you want to be able to these serial ports.
641 bool "Console on SGI Zilog8530 serial port"
646 tristate "SuperH SCI(F) serial port support"
652 int "Maximum number of SCI(F) serial ports" if EXPERT
683 Say Y if you want to be able to use the RZ/T2H SCI serial port.
686 tristate "LPC32XX high speed serial port support"
691 Support for the LPC32XX high speed serial ports (up to 900kbps).
697 bool "Enable LPC32XX high speed UART serial console"
701 If you would like to be able to use one of the high speed serial
715 bool "Coldfire serial support"
719 This serial driver supports the Freescale Coldfire serial ports.
722 int "Default baudrate for Coldfire serial ports"
727 ColdFire serial ports. The usual default varies from board to board,
731 bool "Coldfire serial console support"
735 Enable a ColdFire internal serial port to be the system console.
742 This driver supports the Zilog z85C30 serial ports found on
744 Say Y or M if you want to be able to these serial ports.
752 8250 serial port driver also uses these numbers, which means
760 access the built-in serial ports on powermacs will need to
772 bool "Console on Mac or PowerMac z85c30 serial port"
776 If you would like to be able to use the z85c30 serial port
781 tristate "CPM SCC/SMC serial port support"
785 This driver supports the SCC and SMC serial ports on Motorola
789 bool "Support for console on CPM SCC/SMC serial port"
805 tristate "Microchip PIC32 serial support"
809 If you have a PIC32, this driver supports the serial ports.
811 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
812 to use a serial port as a console, this must be included in kernel and
816 bool "PIC32 serial console support"
821 of the serial ports.
826 tristate "Freescale MPC52xx/MPC512x family PSC serial support"
830 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
836 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
840 Select this options if you'd like to use one of the PSC serial port
844 int "Freescale MPC52xx/MPC512x family PSC serial port baud"
859 This driver is for a family of multiport serial adapters
886 bool "TX39XX/49XX SIO act as standard serial"
895 of cards which provide multiple serial ports. You would need
906 tristate "MSM on-chip serial port support"
911 bool "MSM serial console support"
917 tristate "QCOM on-chip GENI based serial port support"
936 Set this to the maximum number of serial ports you want the driver
940 bool "VIA VT8500 on-chip serial port support"
945 bool "VIA VT8500 serial console support"
950 tristate "OMAP serial port support"
955 can enable its onboard serial ports by enabling this option.
958 with the omap-serial driver. DMA support can be enabled from platform
962 bool "Console on OMAP serial port"
966 Select this option if you would like to use omap serial port as
1004 tristate "Lantiq serial driver"
1022 tristate "Freescale QUICC Engine serial port support"
1027 This driver supports the QE serial ports on Freescale embedded
1031 tristate "SCCNXP serial port support"
1039 bool "Console on SCCNXP serial port"
1043 Support for console on SCCNXP serial ports.
1094 bool "Console on BCM63xx serial port"
1099 If you have enabled the serial port on the BCM63xx CPU
1103 tristate "GRLIB APBUART serial support"
1107 Add support for the GRLIB APBUART serial port.
1110 bool "Console on GRLIB APBUART serial port"
1228 tristate "AR933X serial port support"
1240 bool "Console on AR933X serial port"
1247 int "Maximum number of AR933X serial ports"
1251 Set this to the number of serial ports you want the driver
1288 Set this to the number of serial ports you want the driver
1297 RocketPort INFINITY families of PCI/PCIe multiport serial adapters.
1316 tristate "Freescale lpuart serial port support"
1323 bool "Console on Freescale lpuart serial port"
1328 If you have enabled the lpuart serial port on the Freescale SoCs,
1332 tristate "Freescale LINFlexD UART serial port support"
1339 bool "Console on Freescale LINFlexD UART serial port"
1344 If you have enabled the LINFlexD UART serial port on the Freescale
1348 tristate "Conexant Digicolor CX92xxx USART serial port support"
1355 bool "Console on Conexant Digicolor serial port"
1359 If you have enabled the USART serial port on Conexant Digicolor
1363 tristate "ST ASC serial port support"
1391 tristate "Support for Spreadtrum serial"
1395 This enables the driver for the Spreadtrum's serial.
1403 Support for early debug console using Spreadtrum's serial. This enables
1404 the console before standard serial driver is probed. This is enabled
1409 tristate "STMicroelectronics STM32 serial port support"
1428 bool "Marvell EBU serial port support"
1434 based on the Armada-3700 SoC and wish to use the on-board serial
1440 bool "Console on Marvell EBU serial port"
1452 tristate "Actions Semi Owl serial port support"
1457 Say 'Y' here if you wish to use the on-board serial port.
1461 bool "Console on Actions Semi Owl serial port"
1471 bool "RDA Micro serial port support"
1476 Say 'Y' here if you wish to use the on-board serial port.
1480 bool "Console on RDA Micro serial port"
1490 tristate "Milbeaut USIO/UART serial port support"
1504 bool "Support for console on MILBEAUT USIO/UART serial port"
1516 tristate "LiteUART serial port support"
1522 This driver is for the FPGA-based LiteUART serial controller from LiteX
1525 Say 'Y' or 'M' here if you wish to use the LiteUART serial controller.
1533 Set this to the maximum number of serial ports you want the driver
1537 bool "LiteUART serial port console support"
1542 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1553 Select this option if you would like to use Sunplus serial port on
1555 If you enable this option, Sunplus serial ports in the system will
1581 module. If you enable this option, Ma35D1 serial ports in the system