Lines Matching refs:console
14 the console before standard serial driver is probed. The console is
33 bool "Support for console on AMBA serial port"
38 console (the system console is the device which receives all kernel
41 Even if you say Y here, the currently visible framebuffer console
42 (/dev/tty0) will still be used as the system console by default, but
44 "console=ttyAM0". (Try "man bootparam" or see the documentation of
60 bool "Support for console on AMBA serial port"
66 console (the system console is the device which receives all kernel
69 Even if you say Y here, the currently visible framebuffer console
70 (/dev/tty0) will still be used as the system console by default, but
72 "console=ttyAMA0". (Try "man bootparam" or see the documentation of
77 bool "Early console using Arm compatible semihosting"
83 Support for early debug console using Arm compatible semihosting.
84 This enables the console before standard serial driver is probed.
86 The console is enabled when early_param is processed.
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
96 the console before standard serial driver is probed. This is enabled
97 with "earlycon=sbi" on the kernel command line. The console is
116 bool "Support for console on a BCM1xxx DUART serial port"
122 system console (the system console is the device which receives all
140 bool "Support for console on AT91 serial port"
146 AT91 processor as the system console (the system
147 console is the device which receives all kernel messages and
178 /dev/, and pass "console=ttyATn" to the kernel.
191 bool "Support for console on meson"
197 system console (the system console is the device which
211 bool "Support for console on CLPS711X serial port"
215 Even if you say Y here, the currently visible virtual console
216 (/dev/tty0) will still be used as the system console by default, but
218 "console=ttyCL1".
241 bool "Support for console on Samsung SoC serial port"
247 an virtual console.
249 Even if you say Y here, the currently visible virtual console
250 (/dev/tty0) will still be used as the system console by default, but
252 "console=ttySACx". (Try "man bootparam" or see the documentation of
277 bool "Support for console on a Tegra TCU serial port"
283 system console (the system console is the device which receives all
300 bool "Support for console on a Tegra UTC serial port"
306 the system console (the system console is the device which receives
346 bool "Support console on DECstation DZ serial driver"
352 system console (the system console is the device which receives all
356 Note that the firmware uses ttyS3 as the serial console on
376 bool "Support for console on a DECstation Z85C30 serial port"
382 system console (the system console is the device which receives all
386 Note that the firmware uses ttyS1 as the serial console on the
406 make it the console by answering Y to this option.
408 Even if you say Y here, the currently visible virtual console
409 (/dev/tty0) will still be used as the system console by default, but
411 "console=ttyFB". (Try "man bootparam" or see the documentation of
439 CPU you can make it the console by answering Y to this option.
441 Even if you say Y here, the currently visible virtual console
442 (/dev/tty0) will still be used as the system console by default, but
444 "console=ttySA0". (Try "man bootparam" or see the documentation of
468 CPU you can make it the console by answering Y to this option.
470 Even if you say Y here, the currently visible virtual console
471 (/dev/tty0) will still be used as the system console by default, but
473 "console=ttySA0". (Try "man bootparam" or see the documentation of
493 CPU you can make it the console by answering Y to this option.
495 Even if you say Y here, the currently visible virtual console
496 (/dev/tty0) will still be used as the system console by default, but
498 "console=ttymxc0". (Try "man bootparam" or see the documentation of
524 bool "Support for console on Xilinx uartlite serial port"
530 console (the system console is the device which receives all kernel
564 on your Sparc system as the console, you can do so by answering
580 on your Sparc system as the console, you can do so by answering
593 software console. The following steps need to be completed to use
599 root on this console.)
600 4. Change the kernel command console parameter to: console=ttyB0
603 bool "Support for console on serial MUX"
621 on your Sparc system as the console, you can do so by answering
628 This driver supports the console device found on SUN4V Sparc
660 bool "Support for console on SuperH SCI(F)" if EXPERT
666 bool "Support for early console on SuperH SCI(F)" if EXPERT
696 bool "Enable LPC32XX high speed UART serial console"
701 ports on the LPC32XX as the console, you can do so by answering
730 bool "Coldfire serial console support"
734 Enable a ColdFire internal serial port to be the system console.
776 on your (Power)Mac as the console, you can do so by answering
788 bool "Support for console on CPM SCC/SMC serial port"
793 console (the system console is the device which receives all kernel
796 Even if you say Y here, the currently visible framebuffer console
797 (/dev/tty0) will still be used as the system console by default, but
799 "console=ttyCPM0". (Try "man bootparam" or see the documentation of
811 to use a serial port as a console, this must be included in kernel and
815 bool "PIC32 serial console support"
819 If you have a PIC32, this driver supports the putting a console on one
822 Say Y to use the PIC32 console, otherwise say N.
831 for use as console, it must be included in kernel and not as a
840 of the Freescale MPC52xx family as a console.
847 Select the MPC52xx console baud rate.
849 console baudrate
910 bool "MSM serial console support"
927 Serial console driver for Qualcomm Technologies Inc's GENI based
944 bool "VIA VT8500 serial console support"
966 console.
968 Even if you say Y here, the currently visible virtual console
969 (/dev/tty0) will still be used as the system console by default, but
971 "console=ttyOx". (Try "man bootparam" or see the documentation of
993 system console.
995 Even if you say Y here, the currently visible virtual console
996 (/dev/tty0) will still be used as the system console by default, but
998 "console=ttySIFx". (Try "man bootparam" or see the documentation of
1018 system console.
1042 Support for console on SCCNXP serial ports.
1090 BCM7xxx (STB) - DOCSIS console
1099 you can make it the console by answering Y to this option.
1113 Support for running a console on the GRLIB APBUART
1122 bool "Altera JTAG UART console support"
1127 Enable a Altera JTAG UART port to be the system console.
1134 Bypass console output and keep going even if there is no
1162 bool "Altera UART console support"
1167 Enable a Altera UART port to be the system console.
1186 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1190 Say Y here if you wish to use the PCH UART as the system console
1191 (the system console is the device which receives all kernel messages and
1204 bool "MXS AUART console support"
1208 Enable a MXS AUART port to be the system console.
1219 bool "Cadence UART console support"
1224 Enable a Cadence UART port to be the system console.
1243 Enable a built-in UART port of the AR933X to be the system console.
1261 bool "MPS2 UART console support"
1328 you can make it the console by answering Y to this option.
1344 SoCs, you can make it the console by answering Y to this option.
1359 SoCs, you can make it the console by answering Y to this option.
1374 bool "Support for console on ST ASC"
1397 bool "Spreadtrum UART console support"
1402 Support for early debug console using Spreadtrum's serial. This enables
1403 the console before standard serial driver is probed. This is enabled
1404 with "earlycon" on the kernel command line. The console is
1421 bool "Support for console on STM32"
1445 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1446 (the system console is the device which receives all kernel messages
1467 as the system console.
1486 console. Only earlycon is implemented currently.
1503 bool "Support for console on MILBEAUT USIO/UART serial port"
1510 SoCs as the system console (the system console is the device which
1536 bool "LiteUART serial port console support"
1542 controller from LiteX SoC builder as the system console
1543 (the system console is the device which receives all kernel messages
1566 system console.
1567 Even if you say Y here, the currently visible virtual console
1568 (/dev/tty0) will still be used as the system console by default, but
1570 "console=ttySUPx".
1579 for use as console, it must be included in kernel and not as a
1589 Nuvoton MA35D1 family as a console.
1590 Even if you say Y here, the currently visible virtual console
1591 (/dev/tty0) will still be used as the system console by default,
1593 "console=ttyNVTx".