Lines Matching full:on
7 depends on HAS_IOMEM
11 depends on SERIAL_CORE
23 depends on ARM_AMBA || COMPILE_TEST
33 bool "Support for console on AMBA serial port"
34 depends on SERIAL_AMBA_PL010=y
50 depends on ARM_AMBA
60 bool "Support for console on AMBA serial port"
61 depends on SERIAL_AMBA_PL011=y
78 depends on ARM64 || ARM || RISCV
85 This is enabled with "earlycon=smh" on the kernel command line.
90 depends on RISCV_SBI
97 with "earlycon=sbi" on the kernel command line. The console is
101 tristate "BCM1xxx on-chip DUART serial support"
102 depends on SIBYTE_SB1xxx_SOC=y
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
109 is implemented. Depending on the SOC configuration there may be
116 bool "Support for console on a BCM1xxx DUART serial port"
117 depends on SERIAL_SB1250_DUART=y
129 bool "AT91 on-chip serial port support"
130 depends on COMMON_CLK
131 depends on ARCH_MICROCHIP || COMPILE_TEST
136 This enables the driver for the on-chip UARTs of the Atmel
140 bool "Support for console on AT91 serial port"
141 depends on SERIAL_ATMEL=y
145 Say Y here if you wish to use an on-chip UART on a Atmel
151 bool "Support DMA transfers on AT91 serial port"
152 depends on SERIAL_ATMEL
167 depends on SERIAL_ATMEL=y
184 depends on ARCH_MESON || COMPILE_TEST
187 This enables the driver for the on-chip UARTs of the Amlogic
191 bool "Support for console on meson"
192 depends on SERIAL_MESON
203 depends on ARCH_CLPS711X || COMPILE_TEST
207 This enables the driver for the on-chip UARTs of the Cirrus
211 bool "Support for console on CLPS711X serial port"
212 depends on SERIAL_CLPS711X=y
222 depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || ARCH_APPLE || ARCH_ARTPEC || COMPILE_TEST
225 Support for the on-chip UARTs on the Samsung
228 these ports, depending on how the serial port pins are configured.
234 depends on SERIAL_SAMSUNG
241 bool "Support for console on Samsung SoC serial port"
242 depends on SERIAL_SAMSUNG
246 Allow selection of the S3C24XX on-board serial ports for use as
258 depends on ARCH_TEGRA || COMPILE_TEST
261 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
263 provide all of these ports, depending on how the serial port
268 depends on MAILBOX
269 depends on (ARCH_TEGRA && TEGRA_HSP_MBOX) || COMPILE_TEST
277 bool "Support for console on a Tegra TCU serial port"
278 depends on SERIAL_TEGRA_TCU=y
291 depends on ARCH_TEGRA || COMPILE_TEST
300 bool "Support for console on a Tegra UTC serial port"
301 depends on SERIAL_TEGRA_UTC
314 depends on SPI
324 depends on SPI_MASTER
338 depends on MACH_DECSTATION && 32BIT
346 bool "Support console on DECstation DZ serial driver"
347 depends on SERIAL_DZ=y
356 Note that the firmware uses ttyS3 as the serial console on
363 depends on MACH_DECSTATION
376 bool "Support for console on a DECstation Z85C30 serial port"
377 depends on SERIAL_ZS=y
386 Note that the firmware uses ttyS1 as the serial console on the
387 Maxine and ttyS3 on the others using this driver.
393 depends on FOOTBRIDGE
396 If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
401 bool "Console on DC21285 serial port"
402 depends on SERIAL_21285=y
405 If you have enabled the serial port on the 21285 footbridge you can
417 depends on !SERIAL_8250 || COMPILE_TEST
421 depends on ARCH_PXA || ARCH_MMP
426 If you have a machine based on an Intel XScale PXA2xx CPU you
433 bool "Console on PXA serial port (DEPRECATED)"
434 depends on SERIAL_PXA
438 If you have enabled the serial port on the Intel XScale PXA
453 depends on ARCH_SA1100
457 If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
463 bool "Console on SA1100 serial port"
464 depends on SERIAL_SA1100
467 If you have enabled the serial port on the SA1100/SA1110 StrongARM
479 depends on ARCH_MXC || COMPILE_TEST
484 If you have a machine based on a Motorola IMX CPU you
488 bool "Console on IMX serial port"
489 depends on SERIAL_IMX
492 If you have enabled the serial port on the Freescale IMX
502 bool "Earlycon on IMX serial port"
503 depends on ARCH_MXC || COMPILE_TEST
504 depends on OF
510 If you have enabled the earlycon on the Freescale IMX
515 depends on HAS_IOMEM
524 bool "Support for console on Xilinx uartlite serial port"
525 depends on SERIAL_UARTLITE=y
535 depends on SERIAL_UARTLITE
547 depends on SPARC
554 depends on SPARC
556 This driver supports the Zilog8530 serial ports found on many Sparc
560 bool "Console on Sun Zilog8530 serial port"
561 depends on SERIAL_SUNZILOG=y
564 on your Sparc system as the console, you can do so by answering
569 depends on SPARC && PCI
572 mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
576 bool "Console on Sun SU serial port"
577 depends on SERIAL_SUNSU=y
580 on your Sparc system as the console, you can do so by answering
585 depends on GSC
597 2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
598 3. Add device ttyB0 to /etc/securetty (if you want to log on as
599 root on this console.)
603 bool "Support for console on serial MUX"
604 depends on SERIAL_MUX=y
610 depends on SPARC && PCI
612 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
617 bool "Console on Sun Siemens SAB82532 serial port"
618 depends on SERIAL_SUNSAB=y
621 on your Sparc system as the console, you can do so by answering
626 depends on SPARC64
628 This driver supports the console device found on SUN4V Sparc
633 depends on SGI_HAS_ZILOG
636 This driver supports the Zilog8530 serial ports found on SGI
640 bool "Console on SGI Zilog8530 serial port"
641 depends on SERIAL_IP22_ZILOG=y
646 depends on SUPERH || ARCH_RENESAS || COMPILE_TEST
654 depends on SERIAL_SH_SCI
660 bool "Support for console on SuperH SCI(F)" if EXPERT
661 depends on SERIAL_SH_SCI=y
666 bool "Support for early console on SuperH SCI(F)" if EXPERT
667 depends on SERIAL_SH_SCI=y
673 bool "Support for DMA on SuperH SCI(F)" if EXPERT
674 depends on SERIAL_SH_SCI && DMA_ENGINE
679 depends on SERIAL_SH_SCI
686 depends on ARCH_LPC32XX || COMPILE_TEST
687 depends on OF
691 Those are UARTs completely different from the Standard UARTs on the
697 depends on SERIAL_HS_LPC32XX=y
701 ports on the LPC32XX as the console, you can do so by answering
715 depends on COLDFIRE
722 depends on SERIAL_MCF
731 depends on SERIAL_MCF
738 depends on (M68K && MAC) || PPC_PMAC
741 This driver supports the Zilog z85C30 serial ports found on
747 depends on SERIAL_PMACZILOG
749 The pmac_zilog driver for the z85C30 chip on many powermacs
759 access the built-in serial ports on powermacs will need to
767 Say N unless you need the z85c30 ports on your (Power)Mac
771 bool "Console on Mac or PowerMac z85c30 serial port"
772 depends on SERIAL_PMACZILOG=y
776 on your (Power)Mac as the console, you can do so by answering
781 depends on CPM2 || CPM1
784 This driver supports the SCC and SMC serial ports on Motorola
788 bool "Support for console on CPM SCC/SMC serial port"
789 depends on SERIAL_CPM=y
805 depends on MACH_PIC32 || COMPILE_TEST
816 depends on SERIAL_PIC32=y
819 If you have a PIC32, this driver supports the putting a console on one
826 depends on PPC_MPC52xx || PPC_MPC512x
835 bool "Console on a Freescale MPC52xx/MPC512x family PSC serial port"
836 depends on SERIAL_MPC52xx=y
844 depends on SERIAL_MPC52xx_CONSOLE=y
853 depends on PCI
854 depends on PPC_PSERIES || COMPILE_TEST
870 depends on HAS_TXX9_SERIAL
876 depends on SERIAL_TXX9
881 depends on SERIAL_TXX9=y
886 depends on !SERIAL_8250 && SERIAL_TXX9
890 depends on PCI && HAS_IOPORT
905 tristate "MSM on-chip serial port support"
906 depends on ARCH_QCOM || COMPILE_TEST
911 depends on SERIAL_MSM=y
916 tristate "QCOM on-chip GENI based serial port support"
917 depends on ARCH_QCOM || COMPILE_TEST
918 depends on QCOM_GENI_SE
923 depends on SERIAL_QCOM_GENI
932 depends on SERIAL_QCOM_GENI
939 bool "VIA VT8500 on-chip serial port support"
940 depends on ARCH_VT8500 || COMPILE_TEST
945 depends on SERIAL_VT8500=y
950 depends on (ARCH_OMAP2PLUS && !SERIAL_8250_OMAP) || COMPILE_TEST
953 If you have a machine based on an Texas Instruments OMAP CPU you
961 bool "Console on OMAP serial port"
962 depends on SERIAL_OMAP=y
977 depends on OF
982 contains a SiFive UART IP block. This type of UART is present on
986 bool "Console on SiFive UART"
987 depends on SERIAL_SIFIVE=y
1004 depends on (LANTIQ || X86) || COMPILE_TEST
1007 Support for UART on Lantiq and Intel SoCs.
1012 bool "Console on Lantiq UART"
1013 depends on SERIAL_LANTIQ=y
1022 depends on QUICC_ENGINE
1026 This driver supports the QE serial ports on Freescale embedded
1038 bool "Console on SCCNXP serial port"
1039 depends on SERIAL_SCCNXP=y
1042 Support for console on SCCNXP serial ports.
1046 depends on SPI_MASTER || I2C || COMPILE_TEST
1074 depends on X86_32 || COMPILE_TEST
1076 Add support for UART controller on timberdale.
1081 depends on ARCH_BCMBCA || BCM63XX || BMIPS_GENERIC || COMPILE_TEST
1084 This enables the driver for the onchip UART core found on
1093 bool "Console on BCM63xx serial port"
1094 depends on SERIAL_BCM63XX=y
1098 If you have enabled the serial port on the BCM63xx CPU
1103 depends on OF && SPARC
1109 bool "Console on GRLIB APBUART serial port"
1110 depends on SERIAL_GRLIB_GAISLER_APBUART=y
1113 Support for running a console on the GRLIB APBUART
1123 depends on SERIAL_ALTERA_JTAGUART=y
1131 depends on SERIAL_ALTERA_JTAGUART_CONSOLE
1145 depends on SERIAL_ALTERA_UART
1154 depends on SERIAL_ALTERA_UART
1163 depends on SERIAL_ALTERA_UART=y
1171 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
1186 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1187 depends on SERIAL_PCH_UART=y
1196 depends on ARCH_MXS || MACH_ASM9260 || COMPILE_TEST
1205 depends on SERIAL_MXS_AUART=y
1212 depends on OF
1220 depends on SERIAL_XILINX_PS_UART=y
1228 depends on (HAVE_CLK && ATH79) || (MIPS && COMPILE_TEST)
1239 bool "Console on AR933X serial port"
1240 depends on SERIAL_AR933X=y
1247 depends on SERIAL_AR933X
1255 depends on ARCH_MPS2 || COMPILE_TEST
1258 This driver support the UART ports on ARM MPS2.
1262 depends on SERIAL_MPS2_UART
1270 Driver for on-chip UART for ARC(Synopsys) for the legacy
1274 bool "Console on ARC UART"
1275 depends on SERIAL_ARC=y
1279 Enable system Console on ARC UART
1283 depends on SERIAL_ARC
1292 depends on PCI
1308 depends on SERIAL_RP2
1316 depends on HAS_DMA
1319 Support for the on-chip lpuart on some Freescale SOCs.
1322 bool "Console on Freescale lpuart serial port"
1323 depends on SERIAL_FSL_LPUART=y
1327 If you have enabled the lpuart serial port on the Freescale SoCs,
1332 depends on PRINTK
1335 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1338 bool "Console on Freescale LINFlexD UART serial port"
1339 depends on SERIAL_FSL_LINFLEXUART=y
1343 If you have enabled the LINFlexD UART serial port on the Freescale
1348 depends on OF
1351 Support for the on-chip USART on Conexant Digicolor SoCs.
1354 bool "Console on Conexant Digicolor serial port"
1355 depends on SERIAL_CONEXANT_DIGICOLOR=y
1358 If you have enabled the USART serial port on Conexant Digicolor
1364 depends on ARM || COMPILE_TEST
1366 This driver is for the on-chip Asynchronous Serial Controller on
1374 bool "Support for console on ST ASC"
1375 depends on SERIAL_ST_ASC=y
1381 depends on MCB
1384 on a MCB carrier.
1392 depends on COMMON_CLK
1398 depends on SERIAL_SPRD=y
1404 with "earlycon" on the kernel command line. The console is
1410 depends on ARCH_STM32 || COMPILE_TEST
1413 This driver is for the on-chip Serial Controller on
1421 bool "Support for console on STM32"
1422 depends on SERIAL_STM32
1428 depends on ARCH_MVEBU || COMPILE_TEST
1429 depends on COMMON_CLK
1433 based on the Armada-3700 SoC and wish to use the on-board serial
1439 bool "Console on Marvell EBU serial port"
1440 depends on SERIAL_MVEBU_UART
1452 depends on ARCH_ACTIONS || COMPILE_TEST
1456 Say 'Y' here if you wish to use the on-board serial port.
1460 bool "Console on Actions Semi Owl serial port"
1461 depends on SERIAL_OWL=y
1471 depends on ARCH_RDA || COMPILE_TEST
1475 Say 'Y' here if you wish to use the on-board serial port.
1479 bool "Console on RDA Micro serial port"
1480 depends on SERIAL_RDA=y
1490 depends on ARCH_MILBEAUT || (COMPILE_TEST && OF)
1499 depends on SERIAL_MILBEAUT_USIO
1503 bool "Support for console on MILBEAUT USIO/UART serial port"
1504 depends on SERIAL_MILBEAUT_USIO=y
1516 depends on HAS_IOMEM
1517 depends on OF
1518 depends on LITEX || COMPILE_TEST
1529 depends on SERIAL_LITEUART
1537 depends on SERIAL_LITEUART=y
1549 depends on ARCH_SUNPLUS || COMPILE_TEST
1552 Select this option if you would like to use Sunplus serial port on
1560 bool "Console on Sunplus UART"
1561 depends on SERIAL_SUNPLUS
1574 depends on ARCH_MA35 || COMPILE_TEST
1584 bool "Console on a Nuvotn MA35D1 family UART port"
1585 depends on SERIAL_NUVOTON_MA35D1=y