Lines Matching +full:smp +full:- +full:offset
2 * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
4 * Copyright (c) 2008-2009 USI Co., Ltd.
18 * 3. Neither the names of the above-listed copyright holders nor the names
137 __le32 header; /* Bits [11:0] - Message operation code */
138 /* Bits [15:12] - Message Category */
139 /* Bits [21:16] - Outboundqueue ID for the
141 /* Bits [23:22] - Reserved */
142 /* Bits [28:24] - Buffer Count, indicates how
144 /* Bits [30:29] - Reserved */
145 /* Bits [31] - Message Valid bit */
172 /* set device bits fis - device to host */
178 /* b5-b4: reserved2 */
179 /* b3-b0: PM Port */
184 /* PIO setup FIS - device to host */
193 /* b3-b0: PM Port */
389 * brief the data structure of SMP Request Command
390 * use to describe MPI SMP REQUEST Command (64 bytes)
396 /* Bits [0] - Indirect response */
397 /* Bits [1] - Indirect Payload */
398 /* Bits [15:2] - Reserved */
399 /* Bits [23:16] - direct payload Len */
400 /* Bits [31:24] - Reserved */
415 * brief the data structure of SMP Completion Response
416 * use to describe MPI SMP Completion Response (64 bytes)
426 *brief the data structure of SSP SMP SATA Abort Command
427 * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
438 * brief the data structure of SSP SATA SMP Abort Response
439 * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
495 __le32 SSAHOLT;/* bit29-set max port;
496 ** bit28-set open reject cmd retries.
497 ** bit27-set open reject data retries.
498 ** bit26-set open reject option, remap:1 or not:0.
499 ** bit25-set sata head of line time out.
502 __le32 open_reject_cmdretries_data_retries;/* cmd retries: 31-bit16;
503 * data retries: bit15-bit0.
548 /* B6-3 : taskPriority */
549 /* B2-0 : taskAttribute */
552 /* B7-2 : additional_cdb_len */
553 /* B1-0 : reserved */
739 * SSP/SMP/SATA IO Completion Status values
822 #define MSGU_IBDB_CLEAR 0x20/* RevB - Host not use */
865 Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */
877 Mask, bit1-0 State */
884 /* main configuration offset - byte offset */
921 /* Gereral Status Table offset - byte offset */
938 /* General Status Table - MPI state */
947 /* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
956 /* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
982 /* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
988 /* Dynamic map through Bar4 - 0x00700000 */
1011 /* RB6 offset */