Lines Matching +full:ssc +full:- +full:controller
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
103 * - A value of 1 indicates generation 1 (i.e. 1.5 Gb/s).
104 * - A value of 2 indicates generation 2 (i.e. 3.0 Gb/s).
105 * - A value of 3 indicates generation 3 (i.e. 6.0 Gb/s).
228 * Spread Spectrum Clocking (SSC) settings for SATA and SAS.
229 * NOTE: Default SSC Modulation Frequency is 31.5KHz.
234 * NOTE: Max spread for SATA is +0 / -5000 PPM.
235 * Down-spreading SSC (only method allowed for SATA):
236 * SATA SSC Tx Disabled = 0x0
237 * SATA SSC Tx at +0 / -1419 PPM Spread = 0x2
238 * SATA SSC Tx at +0 / -2129 PPM Spread = 0x3
239 * SATA SSC Tx at +0 / -4257 PPM Spread = 0x6
240 * SATA SSC Tx at +0 / -4967 PPM Spread = 0x7
244 * SAS SSC Tx Disabled = 0x0
246 * NOTE: Max spread for SAS down-spreading +0 /
247 * -2300 PPM
248 * Down-spreading SSC:
249 * SAS SSC Tx at +0 / -1419 PPM Spread = 0x2
250 * SAS SSC Tx at +0 / -2129 PPM Spread = 0x3
252 * NOTE: Max spread for SAS center-spreading +2300 /
253 * -2300 PPM
254 * Center-spreading SSC:
255 * SAS SSC Tx at +1064 / -1064 PPM Spread = 0x3
256 * SAS SSC Tx at +2129 / -2129 PPM Spread = 0x6
260 * NOTE: Refer to the SSC section of the SAS 2.x
263 * should be 0 for Down-spreading.
264 * SAS SSC Tx spread type:
265 * Down-spreading SSC = 0
266 * Center-spreading SSC = 1
278 * "short"- up to 3m, "medium"-3m to 6m, and "long"- more than
284 * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Medium cable
287 * ASSIGNMENT: <phy3><phy2><phy1><phy0> - Long cable length
290 * BITS 7-4 are set when the cable length is assigned to medium
291 * BITS 3-0 are set when the cable length is assigned to long
300 * phy3 - medium
301 * phy2 - long
302 * phy1 - short
303 * phy0 - short
306 } controller; member