Lines Matching +full:lvds +full:- +full:4 +full:bits
1 /* SPDX-License-Identifier: GPL-2.0 */
8 /* (SCSI chip set used Tekram ASIC TRM-S1040) */
175 /* cmd->result */
197 u8 ProductRev[4]; /* Product Revision */
278 #define TRM_S1040_SCSI_FIFOCNT 0x82 /* SCSI FIFO Counter 5bits(R) */
296 /* --------- ------------- ---------------------------- */
297 /* 07-05 0 RSVD Reversed. Always 0. */
298 /* 04 0 OFFSET4 Reversed for LVDS. Always 0. */
299 /* 03-00 0 OFFSET[03:00] Offset number from 0 to 15 */
304 #define LVDS_SYNC 0x20 /* Enable LVDS synchronous */
306 #define ALT_SYNC 0x08 /* Enable Fast-20 alternate synchronous */
310 /* SYNCM 7 6 5 4 3 2 1 0 */
311 /* Name RSVD RSVD LVDS WIDE ALTPERD PERIOD2 PERIOD1 PERIOD0 */
315 /* --------- ------------- --------------------------- */
316 /* 07-06 0 RSVD Reversed. Always read 0 */
317 /* 05 0 LVDS Reversed. Always read 0 */
318 /* 04 0 WIDE/WSCSI Enable wide (16-bits) SCSI */
323 /* the synchronous period bits 2:0 */
326 /* at the Fast-20 rate. */
328 /* the synchronous period bits 2:0 */
331 /* at the Fast-10 rate (or Fast-40 w/ LVDS). */
333 /* 02-00 0 PERIOD[2:0]/ Synchronous SCSI Transfer Rate. */
334 /* SXPD[02:00] These 3 bits specify */
336 /* Rate for Fast-20 and Fast-10. */
337 /* These bits are also reset */
340 /* For Fast-10 bit ALTPD = 0 and LVDS = 0 */
352 /* For Fast-20 bit ALTPD = 1 and LVDS = 0 */
364 /* For Fast-40 bit ALTPD = 0 and LVDS = 1 */
381 #define TRM_S1040_SCSI_COUNTER 0x88 /* SCSI Transfer Counter 24bits(R/W) */
422 /* ---- ---------------------------------------- */
469 #define TCR0_ENABLE_LVDS 0x2000 /* Enable LVDS synchronous */
511 #define GLOBALINT 0x20 /* DMA_INTEN bit 0-4 set */
535 #define TRM_S1040_DMA_XCNT 0xA8 /* DMA Transfer Counter (R/W), 24bits */
563 #define TRM_S1040_GEN_NVRAM 0xD6 /* Serial NON-VOLATILE RAM port */
575 /* NvmTarCfg0: Target configuration byte 0 :..pDCB->DevMode */
588 /* Nvram Initiater bits definition */
602 /* Nvram Adapter Cfg bits definition */