Lines Matching +full:bit0 +full:- +full:7

1 /* SPDX-License-Identifier: GPL-2.0 */
8 /*	(SCSI chip set used Tekram ASIC TRM-S1040)			*/
28 /* #define DC395x_MAX_CAN_QUEUE		7 * DC395x_MAX_QTAGS */
76 #define BIT0				0x00000001  macro
79 #define UNIT_ALLOCATED			BIT0
85 #define DASD_SUPPORT			BIT0
121 #define RESET_DEV			BIT0
126 #define ABORT_DEV_			BIT0
129 #define SRB_OK				BIT0
143 #define AUTO_REQSENSE			BIT0
165 #define SYNC_NEGO_ENABLE		BIT0
175 /* cmd->result */
217 /*	Inquiry flag definitions (Inq data byte 7)			*/
296 /*	---------	-------------	----------------------------	*/
297 /*	07-05	0	RSVD		Reversed. Always 0.		*/
299 /*	03-00	0	OFFSET[03:00]	Offset number from 0 to 15	*/
306 #define ALT_SYNC			0x08	/* Enable Fast-20 alternate synchronous	*/
310 /*	SYNCM	7    6    5    4    3       2       1       0		*/
315 /*	---------	-------------	---------------------------	*/
316 /*	07-06	0	RSVD		Reversed. Always read 0		*/
318 /*	04	0	WIDE/WSCSI	Enable wide (16-bits) SCSI	*/
326 /*			   at the Fast-20 rate.				*/
331 /*			   at the Fast-10 rate (or Fast-40 w/ LVDS).	*/
333 /*	02-00	0	PERIOD[2:0]/	Synchronous SCSI Transfer Rate.	*/
336 /*					Rate for Fast-20 and Fast-10.	*/
340 /*	For Fast-10 bit ALTPD = 0 and LVDS = 0				*/
341 /*	and bit2,bit1,bit0 is defined as follows :			*/
352 /*	For Fast-20 bit ALTPD = 1 and LVDS = 0				*/
353 /*	and bit2,bit1,bit0 is defined as follows :			*/
364 /*	For Fast-40 bit ALTPD = 0 and LVDS = 1				*/
365 /*	and bit2,bit1,bit0 is defined as follows :			*/
422 /*	----	----------------------------------------		*/
511 #define GLOBALINT			0x20	/* DMA_INTEN bit 0-4 set		*/
563 #define TRM_S1040_GEN_NVRAM		0xD6	/* Serial NON-VOLATILE RAM port		*/
575 /*	NvmTarCfg0: Target configuration byte 0 :..pDCB->DevMode	*/
592 #define MORE2_DRV			BIT0