Lines Matching +full:full +full:- +full:bit
1 /* SPDX-License-Identifier: GPL-2.0 */
10 #define STST BIT(7) /* Self Test in Progress */
11 #define DIAGF BIT(6) /* Internal Diagnostic Failure */
12 #define INIT BIT(5) /* Mailbox Initialization Required */
13 #define IDLE BIT(4) /* SCSI Host Adapter Idle */
14 #define CDF BIT(3) /* Command/Data Out Port Full */
15 #define DF BIT(2) /* Data In Port Full */
16 /* BIT(1) is reserved */
17 #define INVDCMD BIT(0) /* Invalid H A Command */
21 #define ANYINTR BIT(7) /* Any Interrupt */
22 #define SCRD BIT(3) /* SCSI Reset Detected */
23 #define HACC BIT(2) /* HA Command Complete */
24 #define MBOA BIT(1) /* MBO Empty */
25 #define MBIF BIT(0) /* MBI Full */
30 #define HRST BIT(7) /* Hard Reset */
31 #define SRST BIT(6) /* Soft Reset */
32 #define IRST BIT(5) /* Interrupt Reset */
33 #define SCRST BIT(4) /* SCSI Bus Reset */
42 #define CMD_BUSON_TIME 0x07 /* Set Bus-On Time */
43 #define CMD_BUSOFF_TIME 0x08 /* Set Bus-Off Time */
59 /* This is used with scatter-gather */
88 /* Bits 7-5: op=0, 2: Target ID, op=1: Initiator ID */
89 /* Bit 4: Outbound data transfer, length is checked */
90 /* Bit 3: Inbound data transfer, length is checked */
91 /* Bits 2-0: Logical Unit Number */