5   Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
81 MODULE_DESCRIPTION("BusLogic MultiMaster and FlashPoint SCSI Host Adapter driver");
603   and Bus Probe Information to be checked for potential BusLogic MultiMaster
605   machines as well as from the list of standard BusLogic MultiMaster ISA
606   I/O Addresses.  It returns the number of PCI MultiMaster Host Adapters found.
623 	   Iterate over the MultiMaster PCI Host Adapters.  For each  in blogic_init_mm_probeinfo()
628 	   The MultiMaster BIOS will first recognize a host adapter at  in blogic_init_mm_probeinfo()
664 …blogic_err("BusLogic: Base Address0 0x%lX not I/O for MultiMaster Host Adapter\n", NULL, base_addr…  in blogic_init_mm_probeinfo()
669 …blogic_err("BusLogic: Base Address1 0x%lX not Memory for MultiMaster Host Adapter\n", NULL, base_a…  in blogic_init_mm_probeinfo()
674 			blogic_err("BusLogic: IRQ Channel %d invalid for MultiMaster Host Adapter\n", NULL, irq_ch);  in blogic_init_mm_probeinfo()
679 			blogic_notice("BusLogic: PCI MultiMaster Host Adapter detected at\n", NULL);  in blogic_init_mm_probeinfo()
706 		   For the first MultiMaster Host Adapter enumerated,  in blogic_init_mm_probeinfo()
732 		   Determine whether this MultiMaster Host Adapter has its  in blogic_init_mm_probeinfo()
735 		   MultiMaster Host Adapter and must be recognized first.  in blogic_init_mm_probeinfo()
737 		   after any Primary MultiMaster Host Adapter is probed.  in blogic_init_mm_probeinfo()
767 	   option is ON for the first enumerated MultiMaster Host Adapter,  in blogic_init_mm_probeinfo()
769 	   MultiMaster BIOS will recognize MultiMaster Host Adapters in  in blogic_init_mm_probeinfo()
772 	   If this option is OFF, then the MultiMaster BIOS will recognize  in blogic_init_mm_probeinfo()
773 	   MultiMaster Host Adapters in the order they are enumerated by  in blogic_init_mm_probeinfo()
780 	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,  in blogic_init_mm_probeinfo()
914   list of standard BusLogic MultiMaster ISA I/O Addresses.  By default, if both
915   FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
917   controlled by the first PCI MultiMaster Host Adapter, in which case
918   MultiMaster Host Adapters will be probed first.  The BusLogic Driver Options
926 	   If a PCI BIOS is present, interrogate it for MultiMaster and  in blogic_init_probeinfo_list()
928 	   ISA MultiMaster probe.  in blogic_init_probeinfo_list()
962 				   PCI MultiMaster Host Adapter, then reverse  in blogic_init_probeinfo_list()
963 				   the probe order so that MultiMaster Host  in blogic_init_probeinfo_list()
1221 		blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n", adapter,  in blogic_checkadapter()
1358 	   BusLogic MultiMaster Host Adapters can be identified by their  in blogic_rdconfig()
1466 	   Termination Information from "W" series MultiMaster Host Adapters.  in blogic_rdconfig()
1486 	   AutoSCSI data from "W" and "C" series MultiMaster Host Adapters.  in blogic_rdconfig()
1525 	   series MultiMaster Host Adapters.  in blogic_rdconfig()
1590 	   all "W" series MultiMaster Host Adapters, on "C" series  in blogic_rdconfig()
1591 	   MultiMaster Host Adapters with firmware version 4.22 and above,  in blogic_rdconfig()
1592 	   and on "S" series MultiMaster Host Adapters with firmware version  in blogic_rdconfig()
1627 	   Initialize parameters common to MultiMaster and FlashPoint  in blogic_rdconfig()
3130 		   Attempt to Abort this CCB.  MultiMaster Firmware versions  in DEF_SCSI_QCMD()
3232   series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
3233   series MultiMaster Host Adapters.  With Extended Translation enabled, drives