Lines Matching full:if
19 Generic RTC class support. If you say yes here, you will
23 if RTC_CLASS
29 If you say yes here, the system time (wall clock) will be set using
48 If the clock you specify here is not battery backed, it may still
57 If you say yes here, the system time (wall clock) will be stored
59 minutes if userspace reports synchronized NTP status.
64 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
79 tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
85 If unsure, say N.
102 Say yes here if you want to use your RTCs using sysfs interfaces,
105 If unsure, say Y.
112 Say yes here if you want to use your system clock RTC through
115 If there is no RTC for the system clock, then the first RTC(rtc0)
118 If unsure, say Y.
124 Say yes here if you want to use your RTCs using the /dev
133 If unsure, say Y.
139 Provides an emulation for RTC_UIE if the underlying rtc chip
145 only if you know that you really need it.
150 If you say yes here you get support for the
154 You want this driver only if you are doing development
158 This driver can also be built as a module. If so, the module
163 if I2C
169 If you say yes here you get support for RTC function in Marvell
172 This driver can also be built as a module. If so, the module
179 If you say yes here you get support for RTC function in Marvell
182 This driver can also be built as a module. If so, the module
189 If you say yes here you will get support for the RTC function in the
192 This driver can also be built as a module. If so, the module
199 If you say yes here you get support for the Abracon
202 This driver can also be built as a module. If so, the module
209 If you say yes here you get support for the Abracon
212 This driver can also be built as a module. If so, the module
217 select WATCHDOG_CORE if WATCHDOG
219 If you say yes here you get support for Abracon AB080X and AB180X
223 This driver can also be built as a module. If so, the module
230 If you say yes here you get support for the real-time clock found
233 This driver can also be built as a module. If so, the module
241 If you say yes here you get support for the wake-timer found on
244 This driver can also be built as a module. If so, the module will
251 If you say yes here you get support for the RTC of ams AS3722 PMIC
254 This driver can also be built as a module. If so, the module
260 select WATCHDOG_CORE if WATCHDOG
262 If you say yes here you get support for various compatible RTC
274 This driver can also be built as a module. If so, the module
285 Setting this option will add proper support for the century bit but if
294 If you say yes here you get support for Dallas Semiconductor
295 DS1374 real-time clock chips. If an interrupt is associated
298 This driver can also be built as a module. If so, the module
306 If you say Y here you will get support for the
313 If you say yes here you get support for the
316 This driver can also be built as a module. If so, the module
327 This driver can also be built as a module. If so, the module
339 If you say yes here you will get support for the
342 This driver can also be built as a module. If so, the module
350 If you say yes here you will get support for the
353 This driver can also be built as a module. If so, the module
360 If you say yes here you will get support for the
363 This driver can also be built as a module. If so, the module
370 If you say yes here you will get support for the
373 This driver can also be built as a module. If so, the module
380 If you say yes here you will get support for the
383 This driver can also be built as a module. If so, the module
393 If you say yes here you get support for the Analog Devices
396 This driver can also be built as a module. If so, the module
403 If you say yes here you will get support for the
406 This driver can also be built as a module. If so, the module
423 If you say yes here you will get support for the battery backed RTC device
426 This driver can also be built as a module. If so, the module will be called
433 If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
436 This driver can also be built as a module, if so, the module will be
443 If you say yes to this option, support will be included for Nuvoton
446 This driver can also be built as a module. If so, the module will
453 If you say yes here you will get support for the
456 This driver can also be built as a module. If so, the module
462 If you say yes here you get support for the
465 This driver can also be built as a module. If so, the module
471 If you say yes here you get support for the
474 This driver can also be built as a module. If so, the module
481 If you say yes here you get support for the
484 This driver can also be built as a module. If so, the module
491 If you say yes here you get support for the
494 This driver can also be built as a module. If so, the module
500 If you say yes here you get support for the
503 This driver can also be built as a module. If so, the module
510 If you say yes here you get support for the NXP PCF8523 RTC
513 This driver can also be built as a module. If so, the module
520 If you say yes here you get support for the PCF85363 RTC chip.
522 This driver can also be built as a module. If so, the module
532 If you say yes here you get support for the
536 This driver can also be built as a module. If so, the module
542 If you say yes here you get support for the Philips PCF8583
548 This driver can also be built as a module. If so, the module
554 If you say Y here you will get support for the ST M41T60
559 This driver can also be built as a module. If so, the module
566 If you say Y here you will get support for the
573 If you say Y here you will get support for the RTC
577 This driver can also be built as a module. If so, the module
583 If you say Y here you will get support for the TI
586 This driver can also be built as a module. If so, the module
593 If you say yes here you get support for the RTC on the
603 If you say yes here you get support for the RTC on the
606 This driver can also be built as a module. If so, the module
613 If you say yes here you get support for the RTC of TI PALMA series PMIC
616 This driver can also be built as a module. If so, the module
636 This driver can also be built as a module. If so, the module
643 If you say yes here you get support for the RTC on the
646 This driver can also be built as a module. If so, the module
653 If you say yes here you get support for the RTC on the
656 This driver can also be built as a module. If so, the module
663 If you say yes here you get support for the RTC on the
666 This driver can also be built as a module. If so, the module
673 If you say yes here you will get support for the Seiko
676 This driver can also be built as a module. If so the module
682 If you say Y here you will get support for the
687 This driver can also be built as a module. If so the module
694 If you say yes here you get support for the Epson RX8010SJ RTC
697 This driver can also be built as a module. If so, the module
705 If you say yes here you will get support for the Epson RX8111 RTC.
707 This driver can also be built as a module. If so, the module will be
714 If you say yes here you will get support for the Epson RX-8571/
717 This driver can also be built as a module. If so the module
723 If you say yes here you get support for the Epson
726 This driver can also be built as a module. If so, the module
732 If you say yes here you get support for the EM
735 This driver can also be built as a module. If so, the module
742 If you say yes here you get support for the Micro Crystal
745 This driver can also be built as a module. If so, the module
752 If you say yes here you get support for the Micro Crystal
755 This driver can also be built as a module. If so, the module
761 If you say yes here you get support for the Micro Crystal RV8803 and
764 This driver can also be built as a module. If so, the module
773 If you say yes here you will get support for the
776 This driver can also be built as a module. If so, the module
783 If you say yes here you will get support for the
786 This driver can also be built as a module. If so, the module
793 If you say yes here you get support for the ZXW Shenzhen whwave
796 This driver can also be built as a module. If so, the module
803 if SPI_MASTER
808 If you say yes here you will get support for the
811 This driver can also be built as a module. If so, the module
817 If you say yes here you will get support for the
820 This driver can also be built as a module. If so, the module
827 If you say yes here you get support for the Dallas DS1302 RTC chips.
829 This driver can also be built as a module. If so, the module
839 This driver can also be built as a module. If so, the module
846 If you say yes here you get support for the
850 This driver can also be built as a module. If so, the module
857 If you say yes here you get support for the
863 This driver can also be built as a module. If so, the module
869 If you say yes here you get support for the
875 This driver can also be built as a module. If so, the module
881 If you say yes here you will get support for the
887 This driver can also be built as a module. If so, the module
893 If you say yes here you will get support for the
896 This driver can also be built as a module. If so, the module
902 If you say yes here you will get support for the Epson RX-4581.
904 This driver can also be built as a module. If so the module
910 If you say yes here you get support for the
913 This driver can also be built as a module. If so, the module
919 If you say yes here you will get support for the
922 This driver can also be built as a module. If so, the module
929 If you say yes here you get support for the NXP PCF2123
932 This driver can also be built as a module. If so, the module
938 If you say yes here you will get support for the Microchip MCP795.
940 This driver can also be built as a module. If so the module
951 default m if I2C=m
952 default y if I2C=y
953 default y if SPI_MASTER=y
960 select REGMAP_I2C if I2C
961 select REGMAP_SPI if SPI_MASTER
963 If you say yes here you get support for Dallas Semiconductor
964 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
967 This driver can also be built as a module. If so, the module
975 Say Y here if you want to expose temperature sensor data on
981 select REGMAP_I2C if I2C
982 select REGMAP_SPI if SPI_MASTER
983 select WATCHDOG_CORE if WATCHDOG
985 If you say yes here you get support for the NXP PCF2127/29/31 RTC
993 This driver can also be built as a module. If so, the module
999 select REGMAP_I2C if I2C
1000 select REGMAP_SPI if SPI_MASTER
1002 If you say yes here you get support for the PCF85063 and RV8063
1005 This driver can also be built as a module. If so, the module
1011 select REGMAP_I2C if I2C
1012 select REGMAP_SPI if SPI_MASTER
1014 If you say yes here you get support for the Micro Crystal
1017 This driver can also be built as a module. If so, the module
1026 Say Y here if you want to expose temperature sensor data on
1032 select REGMAP_SPI if SPI_MASTER
1033 select REGMAP_I2C if I2C
1035 If you say yes here you will get support for the Epson RX-6110.
1037 This driver can also be built as a module. If so the module
1050 default y if X86
1061 you can safely enable this driver if you don't know whether
1064 This driver can also be built as a module. If so, the module
1075 system, specifically MC146818 compatibles. If in doubt, say Y.
1082 If you say yes here you will get support for the Andes ATCRTC100
1096 If you say yes here you get support for the Dallas DS1216 RTC chips.
1102 If you say yes here you get support for the Dallas DS1286 RTC chips.
1108 If you say yes here you get support for the
1111 This driver can also be built as a module. If so, the module
1118 If you say yes here you get support for the
1121 This driver can also be built as a module. If so, the module
1128 If you say yes here you get support for the Dallas/Maxim DS1685
1133 This driver can also be built as a module. If so, the module
1196 If you say yes here you get support for the
1199 This driver can also be built as a module. If so, the module
1205 If you say yes here you get support for the
1208 This driver can also be built as a module. If so, the module
1222 If you say yes here you will get support for the
1225 This driver can also be built as a module. If so, the module
1232 If you say yes here you will get support for the RTC subsystem
1235 This driver can also be built as a module. If so, the module
1242 If you say yes here you will get support for the EFI
1245 This driver can also be built as a module. If so, the module
1252 If you say yes here you get support for the
1255 This driver can also be built as a module. If so, the module
1262 If you say Y here you will get support for the
1265 This driver can also be built as a module. If so, the module
1272 If you say Y here you will get support for the
1275 This driver can also be built as a module, if so, the module
1282 If you say Y here you will get support for the
1288 This driver can also be built as a module, if so, the module
1295 If you say yes here you get support for the Oki MSM6242
1298 This driver can also be built as a module. If so, the module
1306 If you say Y here you will get support for the TI
1309 This driver can also be built as a module. If so, the module
1316 If you say yes here you get support for the Ricoh RP5C01
1320 This driver can also be built as a module. If so, the module
1328 If you say yes here you will get support for the RTC subsystem
1331 This driver can also be built as a module. If so, the module
1338 If you say yes here you will get support for the RTC subsystem
1341 This driver can also be built as a module. If so, the module
1348 If you say yes here you will get support for the RTC subsystem
1351 This driver can also be built as a module. If so, the module
1358 If you say Y here you will get support for the RTC subsystem
1362 This driver can also be built as a module. If so, the module
1370 If you say Y here you will get support for the RTC found on
1387 If you say yes here you get support for the PowerNV platform RTC
1390 This driver can also be built as a module. If so, the module
1400 This driver can also be built as a module. If so, the module
1407 If you say yes here you get support for the RTC controller found on
1414 If you say yes here you will get support for the
1417 This driver can also be built as a module. If so, the module
1424 Say yes here if you want to support the RTC functionality of the
1434 If you say yes here you get support for the RTC on the
1437 This driver can also be built as a module. If so, the module
1446 If you say yes here you get support the RTC driver for Sophgo CV1800
1449 This driver can also be built as a module. If so, the module will be
1456 If you say yes here you get support for the RTC on Conexant
1459 This driver can also be built as a module. If so, the module
1469 This driver can also be built as a module, if so, the module
1482 This driver can also be built as a module, if so, the module
1493 This driver can also be built as a module, if so, the module
1499 default m if ARCH_MESON
1501 If you say yes here you will get support for the
1504 This driver can also be built as a module. If so, the module
1517 This driver can also be built as a module, if so, module
1530 This driver can also be build as a module. If so, the module
1537 If you say yes here you get support for the
1540 This driver can also be built as a module. If so, the module
1547 If you say Y here you will get access to the real time clock
1573 This driver can also be built as a module. If so, the module
1580 If you say Y here you will get access to ARM AMBA
1590 If you say Y here you will get access to ARM AMBA
1627 This driver can also be built as a module. If so, the module
1634 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1641 If you say yes here you get support for the Renesas RZ/N1 RTC.
1650 RTC abstraction. If you do not know what you are doing, you should
1658 If you say Y here you will get access to the real time clock
1669 If you say Y here you will get access to the real time clock
1677 If you say Y here you will get support for the Hypervisor
1686 If you say Y here you will get support for the RTC found in
1693 If you say Y here you will get support for the RTC found on
1700 If you say Y here you will get support for the RTC found on
1707 If you say yes here you will get support for the in-chip RTC
1711 This driver can also be built as a module. If so, the module
1719 If you say yes here you will get support for the in-chip RTC
1722 This driver can also be built as a module. If so, the module
1729 If you say Y here you will get access to Cadence RTC IP
1740 If you say Y here you will get support for the
1743 This driver can also be built as a module. If so, the module
1750 If you say yes here you will get support for the RTC on PS3.
1752 This driver can also be built as a module. If so, the module
1760 If you say yes here you will get support for the onboard
1763 This driver can also be built as a module. If so, the module
1770 If you say Y here you will get support for the RTC found on
1784 If you say yes here you will get support for the
1787 This driver can also be built as a module. If so, the module
1795 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1798 This driver can also be built as a module. If so, the module
1811 This driver can also be built as a module. If so, the module
1823 If you have one of the devices above enable this driver to use
1824 the hardware RTC. This driver can also be built as a module. If
1833 This driver can also be built as a module. If so, the module
1840 If you say yes here you get support for the
1850 If you say yes here you get support for the
1853 This drive can also be built as a module. If so, the module
1862 If you say yes here you get support for the Freescale MXC
1865 This driver can also be built as a module, if so, the module
1874 If you say yes here you get support for the Freescale MXC
1877 This driver can also be built as a module, if so, the module
1887 If you say yes here you get support for the Freescale SNVS
1890 This driver can also be built as a module, if so, the module
1900 If you say yes here you get support for the NXP BBNSM RTC module.
1902 This driver can also be built as a module, if so, the module
1907 default y if ARCH_MXC
1910 If you say yes here you get support for the NXP i.MX BBSM SCMI
1921 If you say yes here you get support for the NXP i.MX System
1939 If you say yes here you get support for the MOXA ART
1942 This driver can also be built as a module. If so, the module
1952 This drive can also be built as a module. If so, the module
1964 If you want to use MediaTek(R) RTC interface, select Y or M here.
1973 This drive can also be built as a module. If so, the module
1981 If you say yes here you get support for the APM X-Gene SoC real time
1984 This driver can also be built as a module, if so, the module
1992 If you say yes here you get support for the PIC32 RTC module.
1994 This driver can also be built as a module. If so, the module
2002 If you say yes here you get support for the EPSON TOYOCOM
2005 This driver can also be built as a module. If so, the module
2019 If you say yes here you get support for the STM32 On-Chip
2022 This driver can also be built as a module, if so, the module
2037 If you say yes here, you get support for the RTD1295 SoC
2045 If you say yes here you get support for the ASPEED BMC SoC real time
2048 This driver can also be built as a module, if so, the module
2056 If you say yes here you get support for the Texas Instruments's
2059 This driver can also be built as a module, if so, the module
2067 If you say yes here you get support for the Nuvoton MA35D1
2070 This driver can also be built as a module, if so, the module
2077 If you say yes here you get support for the Renesas RTCA-3 RTC
2080 This driver can also be built as a module, if so, the module
2097 If you say yes here, you get read/write support for the Real Time
2100 This can also be built as a module. If so, the module will
2107 If you say yes here you get support for RTC functions
2118 If you say yes here you get support for the Mstar MSC313e On-Chip
2121 This driver can also be built as a module, if so, the module
2128 If you say yes here you will get support for the
2131 This driver can also be built as a module, if so, the module
2139 If you say yes here you get support for the SigmaStar SSD202D On-Chip
2142 This driver can also be built as a module, if so, the module
2151 If you say yes here you get support for the RTC block on the
2154 This driver can also be built as a module. If so, the module
2179 If this driver is compiled as a module, it will be named