Lines Matching full:ldo
137 tristate "Freescale i.MX on-chip ANATOP LDO regulators"
198 controllable DCDC/LDO regulators.
206 controllable DCDC/LDO regulators.
229 controllable LDO/Switching regulators.
238 and LDO regulators and a current regulator for LEDs.
250 support for the software controllable buck and LDO regulators.
262 and LDO regulators.
295 and LDO regulators.
441 and four LDO outputs.
555 provides two step-down converters and two general-purpose LDO
603 The MAX14577 regulators include safeout LDO and charger current
660 power rails and an LDO.
851 the software controllable 4 buck and 4 LDO regulators.
879 the software controllable 4 buck and 5 LDO regulators.
972 This is support MT6360 PMIC/LDO part include
974 6-channel High PSRR and Low Dropout LDO.
992 general purpose LDO which is commonly used to drive the vibrator.
1028 controllable SMPS/LDO regulators.
1261 through regulator interface. The device supports multiple DCDC/LDO
1271 through regulator interface. The device supports multiple DCDC/LDO
1318 current source, LDO and Buck.
1325 It integrates 4 channels buck controller, 1 channel LDO, 1 EXTEN
1349 buck converters, 1 LDO, mute AC OFF depop function, with the general
1468 via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
1523 converters and 12 programmable LDO regulators. To compile this
1570 tristate "TI Adaptive Body Bias on-chip LDO"
1574 Bias (ABB) LDO regulators. It is recommended that this option be
1678 three step-down converters and two general-purpose LDO voltage regulators.
1686 three step-down converters and two general-purpose LDO voltage regulators.
1727 provides three step-down converters and four general-purpose LDO
1736 provides six step-down converters and one general-purpose LDO
1750 LDOs. One LDO supports a maximum output current of 300 mA and the
1775 provides three step-down converters and two general-purpose LDO
1847 tristate "IPQ4019 VQMMC SD LDO regulator support"
1850 This driver provides support for the VQMMC LDO I/0