Lines Matching +full:15 +full:db

310  *     If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
312  *     regulatory limit by 3 dB (half-power) for each transmitter, so the
320  *     Backoff values below are in 1/2 dB units (equivalent to steps in
323  *     OFDM 6 - 36 MBit:  10 steps (5 dB)
324  *     OFDM 48 MBit:      15 steps (7.5 dB)
325  *     OFDM 54 MBit:      17 steps (8.5 dB)
326  *     OFDM 60 MBit:      20 steps (10 dB)
327  *     CCK all rates:     10 steps (5 dB)
388  *     txpower is reached.  Each step in the gain table is 1/2 dB.
392  *     by 3 dB.
405  *     2.4 GHz all channels:  3.5 degrees per half-dB step
406  *     5 GHz channels 34-43:  4.5 degrees per half-dB step
407  *     5 GHz channels >= 44:  4.0 degrees per half-dB step
440  * 8)  If setting up txpowers for MIMO rates (rate idxes 8-15, 24-31),
461  *     Hardware rev B:  9 steps (4.5 dB)
462  *     Hardware rev C:  5 steps (2.5 dB)
482  * limit each transmitter to deliver a max of 3 dB below the regulatory limit
486  * The value "6" represents number of steps in gain table to reduce power 3 dB.
487  * Each step is 1/2 dB.
516  * Each entry in the gain tables represents a step of 1/2 dB.  Note that these
527  *     It is a coarser setting, and behaves in a logarithmic (dB) fashion.
562  *  15        110         0x3a
676  *  15        104         0x38
814 /* Group 0, 5.2 GHz ch 34-43:  4.5 degrees per 1/2 dB. */
818 /* Group 1, 5.3 GHz ch 44-70:  4.0 degrees per 1/2 dB. */
822 /* Group 2, 5.5 GHz ch 71-124:  4.0 degrees per 1/2 dB. */
826 /* Group 3, 5.7 GHz ch 125-200:  4.0 degrees per 1/2 dB. */
830 /* Group 4, 2.4 GHz all channels:  3.5 degrees per 1/2 dB. */
901 #define IL4965_DEFAULT_TX_RETRY  15
962 /* Find TFD CB base pointer for given queue (range 0-15). */
1081  * 15-14: reserved
1095 #define FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK (0x00008000)	/* bit 15 */