Lines Matching +full:firmware +full:- +full:based
1 # SPDX-License-Identifier: GPL-2.0-only
5 comment "Host-side USB support is needed for USB Network Adapter support"
16 tristate "USB CATC NetMate-based Ethernet device support"
20 device based on the EL1210A chip. Supported devices are:
35 tristate "USB KLSI KL5USB101-based ethernet device support"
38 USB Ethernet adapters based on the KLSI KL5KUSB101B chipset:
40 ADS USB-10BT
45 D-Link DSB-650C and DU-E10
47 I-O DATA USB-ET/T
51 Mobility USB-Ethernet Adapter
52 NetGear EA-101
61 SmartBridges smartNIC or on Belkin F5U111 devices - you should use
74 tristate "USB Pegasus/Pegasus-II based ethernet device support"
77 Say Y here if you know you have Pegasus or Pegasus-II based adapter.
82 is Pegasus or Pegasus II based then send me
89 tristate "USB RTL8150 based ethernet device support"
92 Say Y here if you have RTL8150 based usb-ethernet adapter.
100 tristate "Realtek RTL8152/RTL8153 Based USB Ethernet Adapters"
108 This option adds support for Realtek RTL8152 based USB 2.0
109 10/100 Ethernet adapters and RTL8153 based USB 3.0 10/100/1000
116 tristate "Microchip LAN78XX Based USB Ethernet Adapters"
123 This option adds support for Microchip LAN78XX based USB 2
135 tristate "Multi-purpose USB Networking Framework"
145 - Another USB host, when using USB "network" or "data transfer"
150 - An intelligent USB gadget, perhaps embedding a Linux system.
153 CDC-Ethernet specification (including many cable modems).
155 - Network adapter hardware (like those for 10/100 Ethernet) which
159 a two-node link, or "eth0" for most CDC-Ethernet devices. Those
160 two-node links are most easily managed with Ethernet Bridging
163 For more information see <http://www.linux-usb.org/usbnet/>.
169 tristate "ASIX AX88xxx Based USB 2.0 Ethernet Adapters"
177 This option adds support for ASIX AX88xxx based USB 2.0
184 * Billionton Systems, GUSB2AM-1G-B
185 * Buffalo LUA-U2-KTX
186 * Corega FEther USB2-TX
187 * D-Link DUB-E100
191 * Sitecom LN-029
192 * Sitecom LN-028
195 * TrendNet TU2-ET100
207 This option adds support for ASIX AX88179 based USB 3.0/2.0
213 * Sitcomm LN-032
225 implement in device firmware. The CDC specifications are available
229 that support USB connectivity, used for non-Microsoft USB hosts.
230 The Linux-USB CDC Ethernet Gadget driver is an open implementation.
252 implement in device firmware. The CDC EEM specifications are available
274 * ST-Ericsson M700 LTE FDD/TDD Mobile Broadband Modem (ref. design)
275 * ST-Ericsson M5730 HSPA+ Mobile Broadband Modem (reference design)
276 * ST-Ericsson M570 HSPA+ Mobile Broadband Modem (reference design)
277 * ST-Ericsson M343 HSPA Mobile Broadband Modem (reference design)
286 This driver supports huawei-style NCM devices, that use NCM as a
308 through the associated /dev/cdc-wdmx character device.
314 tristate "Davicom DM96xx based USB 10/100 ethernet devices"
319 based USB 10/100 Ethernet adapters.
322 tristate "CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices"
326 This option adds support for CoreChip-sz SR9700 based USB 1.1
330 tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices"
335 device based on the CoreChip-sz SR9800 chip.
345 tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices"
351 This option adds support for SMSC LAN75XX based USB 2.0
355 tristate "SMSC LAN95XX based USB 2.0 10/100 ethernet devices"
364 This option adds support for SMSC LAN95XX based USB 2.0
368 tristate "GeneSys GL620USB-A based cables"
371 Choose this option if you're using a host-to-host cable,
374 Note that the half-duplex "GL620USB" is not supported.
377 tristate "NetChip 1080 based cables (Laplink, ...)"
381 Choose this option if you're using a host-to-host cable based
386 tristate "Prolific PL-2301/2302/25A1/27A1 based cables"
391 Choose this option if you're using a host-to-host cable
395 tristate "MosChip MCS7830 based Ethernet adapters"
399 adapter based on the MosChip 7830 controller. This includes
427 without any device-specific information. Select it if you have
430 Note that while many USB host-to-host cables can work in this mode,
437 bool "ALi M5632 based 'USB 2.0 Data Link' cables"
441 Choose this option if you're using a host-to-host cable
442 based on this design, which supports USB 2.0 high speed.
445 bool "AnchorChips 2720 based cables (Xircom PGUNET, ...)"
449 Choose this option if you're using a host-to-host cable
450 based on this design. Note that AnchorChips is now a
454 bool "eTEK based host-to-host cables (Advance, Belkin, ...)"
459 Choose this option if you're using a host-to-host cable
460 based on this design: two NetChip 2890 chips and an Atmel
469 Choose this option to support the "usb-eth" networking driver
471 such as the SA-11x0 and PXA-25x UDCs, or the tftp capabilities
474 Linux-based "Gumstix" PXA-25x based systems use this protocol
482 bool "Epson 2888 based firmware (DEVELOPMENT)"
487 by some sample firmware from Epson.
490 bool "KT Technology KC2190 based cables (InstaNet)"
494 Choose this option if you're using a host-to-host cable
505 Zaurus models like the SL-5000D, SL-5500, SL-5600, A-300, B-500.
506 This also supports some related device firmware, as used in some
509 If you install an alternate image, such as the Linux 2.6 based
511 protocol. Only the "eth-fd" or "net_fd" drivers in these devices
512 really need this non-conformant variant of CDC Ethernet (or in
519 Choose this option if you're using a Conexant CX82310-based ADSL
524 tristate "Samsung Kalmia based LTE USB modem"
527 Choose this option if you have a Samsung Kalmia based USB modem
528 as Samsung GT-B3730.
534 tristate "QMI WWAN driver for Qualcomm MSM based 3G and LTE modems"
538 Support WWAN LTE/3G devices based on Qualcomm Mobile Data Modem
548 * cdc-wdm: Qualcomm MSM Interface (QMI) protocol on /dev/cdc-wdmx
567 tristate "Intellon PLC based usb adapter"
570 Choose this option if you're using a 14Mb USB-based PLC
593 tristate "USB-to-WWAN Driver for Sierra Wireless modems"
596 Choose this option if you have a Sierra Wireless USB-to-WWAN device.
608 interface exposed by the modem firmware. To establish a connection
633 Ethernet adapters based on AQC111U/AQC112 chips.