Lines Matching full:fiber
713 * register for fiber link.
739 * enabled, then we write the BMCR. Adapted for fiber link in
757 /* Setup fiber advertisement */
837 /* Then the fiber link */
843 /* Do not touch the fiber advertisement if we're in copper->sgmii mode.
873 /* Do not touch the fiber page if we're in copper->sgmii mode */
877 /* Then the fiber link */
1060 * it was previously disabled in the Fiber BMCR!
1699 * @lpa: value of the MII_LPA register for fiber link
1715 int fiber, int status)
1744 if (!fiber) {
1755 /* The fiber link is only 1000M capable */
1786 int fiber;
1794 * and the PHY status register for fiber link status.
1805 fiber = 1;
1807 fiber = 0;
1814 phydev->port = fiber ? PORT_FIBRE : PORT_TP;
1816 if (fiber) {
1830 err = marvell_read_status_page_an(phydev, fiber, status);
1839 * Some Marvell's phys have two modes: fiber and copper.
1842 * First, check the fiber link and status.
1843 * If the fiber link is down, check the copper link and status which
1850 /* Check the fiber mode first */
1862 /* If the fiber link is up, it is the selected and
1864 * fiber page. Please to be careful about that, avoid
1866 * could break the behaviour for some fiber phy like
1872 /* If fiber link is down, check and save copper mode state */
1887 * Some Marvell's phys have two modes: fiber and copper.
1894 /* Suspend the fiber mode first */
1922 * Some Marvell's phys have two modes: fiber and copper.
1929 /* Resume the fiber mode first */