1 // SPDX-License-Identifier: GPL-2.0+
5  * Copyright (C) 2014-2017 Broadcom
17 #include <linux/platform_data/mdio-bcm-unimac.h>
50 	 * peripheral registers for CPU-native byte order.  in unimac_mdio_readl()
53 		return __raw_readl(priv->base + offset);  in unimac_mdio_readl()
55 		return readl_relaxed(priv->base + offset);  in unimac_mdio_readl()
62 		__raw_writel(val, priv->base + offset);  in unimac_mdio_writel()
64 		writel_relaxed(val, priv->base + offset);  in unimac_mdio_writel()
93 	struct unimac_mdio_priv *priv = bus->priv;  in unimac_mdio_read()
97 	ret = clk_prepare_enable(priv->clk);  in unimac_mdio_read()
108 	ret = priv->wait_func(priv->wait_func_data);  in unimac_mdio_read()
115 	 * turn-around, e.g: Broadcom BCM53125 external switches, so check for  in unimac_mdio_read()
119 	if (!(bus->phy_ignore_ta_mask & 1 << phy_id) && (cmd & MDIO_READ_FAIL)) {  in unimac_mdio_read()
120 		ret = -EIO;  in unimac_mdio_read()
126 	clk_disable_unprepare(priv->clk);  in unimac_mdio_read()
133 	struct unimac_mdio_priv *priv = bus->priv;  in unimac_mdio_write()
137 	ret = clk_prepare_enable(priv->clk);  in unimac_mdio_write()
148 	ret = priv->wait_func(priv->wait_func_data);  in unimac_mdio_write()
149 	clk_disable_unprepare(priv->clk);  in unimac_mdio_write()
162  * there (e.g: during system-wide power management).
164  * bus->reset is invoked before mdiobus_scan during mdiobus_register and is
166  * to read from non-existing PHYs, we either use bus->phy_mask or do a manual
171 	struct device_node *np = bus->dev.of_node;  in unimac_mdio_reset()
177 		read_mask = ~bus->phy_mask;  in unimac_mdio_reset()
180 			addr = of_mdio_parse_addr(&bus->dev, child);  in unimac_mdio_reset()
190 			dev_dbg(&bus->dev, "Workaround for PHY @ %d\n", addr);  in unimac_mdio_reset()
205 	if (!priv->clk_freq)  in unimac_mdio_clk_set()
208 	ret = clk_prepare_enable(priv->clk);  in unimac_mdio_clk_set()
212 	if (!priv->clk)  in unimac_mdio_clk_set()
215 		rate = clk_get_rate(priv->clk);  in unimac_mdio_clk_set()
217 	div = (rate / (2 * priv->clk_freq)) - 1;  in unimac_mdio_clk_set()
232 	clk_disable_unprepare(priv->clk);  in unimac_mdio_clk_set()
238 	struct unimac_mdio_pdata *pdata = pdev->dev.platform_data;  in unimac_mdio_probe()
245 	np = pdev->dev.of_node;  in unimac_mdio_probe()
247 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);  in unimac_mdio_probe()
249 		return -ENOMEM;  in unimac_mdio_probe()
253 		return -EINVAL;  in unimac_mdio_probe()
258 	priv->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));  in unimac_mdio_probe()
259 	if (!priv->base) {  in unimac_mdio_probe()
260 		dev_err(&pdev->dev, "failed to remap register\n");  in unimac_mdio_probe()
261 		return -ENOMEM;  in unimac_mdio_probe()
264 	if (of_property_read_u32(np, "clock-frequency", &priv->clk_freq))  in unimac_mdio_probe()
265 		priv->clk_freq = 0;  in unimac_mdio_probe()
267 	priv->mii_bus = mdiobus_alloc();  in unimac_mdio_probe()
268 	if (!priv->mii_bus)  in unimac_mdio_probe()
269 		return -ENOMEM;  in unimac_mdio_probe()
271 	bus = priv->mii_bus;  in unimac_mdio_probe()
272 	bus->priv = priv;  in unimac_mdio_probe()
274 		bus->name = pdata->bus_name;  in unimac_mdio_probe()
275 		priv->wait_func = pdata->wait_func;  in unimac_mdio_probe()
276 		priv->wait_func_data = pdata->wait_func_data;  in unimac_mdio_probe()
277 		bus->phy_mask = ~pdata->phy_mask;  in unimac_mdio_probe()
278 		priv->clk = pdata->clk;  in unimac_mdio_probe()
280 		bus->name = "unimac MII bus";  in unimac_mdio_probe()
281 		priv->wait_func_data = priv;  in unimac_mdio_probe()
282 		priv->wait_func = unimac_mdio_poll;  in unimac_mdio_probe()
283 		priv->clk = devm_clk_get_optional(&pdev->dev, NULL);  in unimac_mdio_probe()
286 	if (IS_ERR(priv->clk)) {  in unimac_mdio_probe()
287 		ret = PTR_ERR(priv->clk);  in unimac_mdio_probe()
291 	bus->parent = &pdev->dev;  in unimac_mdio_probe()
292 	bus->read = unimac_mdio_read;  in unimac_mdio_probe()
293 	bus->write = unimac_mdio_write;  in unimac_mdio_probe()
294 	bus->reset = unimac_mdio_reset;  in unimac_mdio_probe()
295 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s-%d", pdev->name, pdev->id);  in unimac_mdio_probe()
303 		dev_err(&pdev->dev, "MDIO bus registration failed\n");  in unimac_mdio_probe()
309 	dev_info(&pdev->dev, "Broadcom UniMAC MDIO bus\n");  in unimac_mdio_probe()
322 	mdiobus_unregister(priv->mii_bus);  in unimac_mdio_remove()
323 	mdiobus_free(priv->mii_bus);  in unimac_mdio_remove()
337 	{ .compatible = "brcm,asp-v2.2-mdio", },
338 	{ .compatible = "brcm,asp-v2.1-mdio", },
339 	{ .compatible = "brcm,asp-v2.0-mdio", },
340 	{ .compatible = "brcm,bcm6846-mdio", },
341 	{ .compatible = "brcm,genet-mdio-v5", },
342 	{ .compatible = "brcm,genet-mdio-v4", },
343 	{ .compatible = "brcm,genet-mdio-v3", },
344 	{ .compatible = "brcm,genet-mdio-v2", },
345 	{ .compatible = "brcm,genet-mdio-v1", },
346 	{ .compatible = "brcm,unimac-mdio", },