1 // SPDX-License-Identifier: GPL-2.0-only
2 /* drivers/net/ethernet/micrel/ks8851.c
23 #include "ks8851.h"
33  * struct ks8851_net_par - KS8851 Parallel driver private data
34  * @ks8851: KS8851 driver common private data
43  * and the DMA has been de-asserted.
46 	struct ks8851_net	ks8851;  member
53 #define to_ks8851_par(ks) container_of((ks), struct ks8851_net_par, ks8851)
56  * ks8851_lock_par - register access lock
66 	spin_lock_irqsave(&ksp->lock, *flags);  in ks8851_lock_par()
70  * ks8851_unlock_par - register access unlock
80 	spin_unlock_irqrestore(&ksp->lock, *flags);  in ks8851_unlock_par()
84  * ks_check_endian - Check whether endianness of the bus is correct
87  * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit
98 	 * If the endian strap on the KS8851-16MLL in incorrect and the chip  in ks_check_endian()
100 	 * of BE[3:0] byte-enable bits is also swapped such that:  in ks_check_endian()
103 	 * Luckily for us, the byte-enable bits are the top four MSbits of  in ks_check_endian()
115 	 * BE[1:0] and this read returns non-zero 0x8872 value.  in ks_check_endian()
117 	iowrite16(BE3 | BE2 | KS_CIDER, ksp->hw_addr_cmd);  in ks_check_endian()
118 	cider = ioread16(ksp->hw_addr);  in ks_check_endian()
122 	netdev_err(ks->netdev, "incorrect EESK endian strap setting\n");  in ks_check_endian()
124 	return -EINVAL;  in ks_check_endian()
128  * ks8851_wrreg16_par - write 16bit register value to chip
140 	ksp->cmd_reg_cache = (u16)reg | ((BE1 | BE0) << (reg & 0x02));  in ks8851_wrreg16_par()
141 	iowrite16(ksp->cmd_reg_cache, ksp->hw_addr_cmd);  in ks8851_wrreg16_par()
142 	iowrite16(val, ksp->hw_addr);  in ks8851_wrreg16_par()
146  * ks8851_rdreg16_par - read 16 bit register from chip
156 	ksp->cmd_reg_cache = (u16)reg | ((BE1 | BE0) << (reg & 0x02));  in ks8851_rdreg16_par()
157 	iowrite16(ksp->cmd_reg_cache, ksp->hw_addr_cmd);  in ks8851_rdreg16_par()
158 	return ioread16(ksp->hw_addr);  in ks8851_rdreg16_par()
162  * ks8851_rdfifo_par - read data from the receive fifo
174 	netif_dbg(ks, rx_status, ks->netdev,  in ks8851_rdfifo_par()
177 	ioread16_rep(ksp->hw_addr, (u16 *)buff + 1, len / 2);  in ks8851_rdfifo_par()
181  * ks8851_wrfifo_par - write packet to TX FIFO
195 	unsigned int len = ALIGN(txp->len, 4);  in ks8851_wrfifo_par()
198 	netif_dbg(ks, tx_queued, ks->netdev, "%s: skb %p, %d@%p, irq %d\n",  in ks8851_wrfifo_par()
199 		  __func__, txp, txp->len, txp->data, irq);  in ks8851_wrfifo_par()
201 	fid = ks->fid++;  in ks8851_wrfifo_par()
207 	iowrite16(fid, ksp->hw_addr);  in ks8851_wrfifo_par()
208 	iowrite16(txp->len, ksp->hw_addr);  in ks8851_wrfifo_par()
210 	iowrite16_rep(ksp->hw_addr, txp->data, len / 2);  in ks8851_wrfifo_par()
219  * ks8851_start_xmit_par - transmit packet
241 	netif_dbg(ks, tx_queued, ks->netdev,  in ks8851_start_xmit_par()
242 		  "%s: skb %p, %d@%p\n", __func__, skb, skb->len, skb->data);  in ks8851_start_xmit_par()
248 	if (likely(txmir >= skb->len + 12)) {  in ks8851_start_xmit_par()
249 		ks8851_wrreg16_par(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA);  in ks8851_start_xmit_par()
251 		ks8851_wrreg16_par(ks, KS_RXQCR, ks->rc_rxqcr);  in ks8851_start_xmit_par()
272 	struct device *dev = &pdev->dev;  in ks8851_probe_par()
280 		return -ENOMEM;  in ks8851_probe_par()
284 	ks->lock = ks8851_lock_par;  in ks8851_probe_par()
285 	ks->unlock = ks8851_unlock_par;  in ks8851_probe_par()
286 	ks->rdreg16 = ks8851_rdreg16_par;  in ks8851_probe_par()
287 	ks->wrreg16 = ks8851_wrreg16_par;  in ks8851_probe_par()
288 	ks->rdfifo = ks8851_rdfifo_par;  in ks8851_probe_par()
289 	ks->wrfifo = ks8851_wrfifo_par;  in ks8851_probe_par()
290 	ks->start_xmit = ks8851_start_xmit_par;  in ks8851_probe_par()
295 	ks->rc_ier = STD_IRQ;  in ks8851_probe_par()
298 	spin_lock_init(&ksp->lock);  in ks8851_probe_par()
300 	ksp->hw_addr = devm_platform_ioremap_resource(pdev, 0);  in ks8851_probe_par()
301 	if (IS_ERR(ksp->hw_addr))  in ks8851_probe_par()
302 		return PTR_ERR(ksp->hw_addr);  in ks8851_probe_par()
304 	ksp->hw_addr_cmd = devm_platform_ioremap_resource(pdev, 1);  in ks8851_probe_par()
305 	if (IS_ERR(ksp->hw_addr_cmd))  in ks8851_probe_par()
306 		return PTR_ERR(ksp->hw_addr_cmd);  in ks8851_probe_par()
312 	netdev->irq = platform_get_irq(pdev, 0);  in ks8851_probe_par()
313 	if (netdev->irq < 0)  in ks8851_probe_par()
314 		return netdev->irq;  in ks8851_probe_par()
321 	ks8851_remove_common(&pdev->dev);  in ks8851_remove_par()
325 	{ .compatible = "micrel,ks8851-mll" },
332 		.name = "ks8851",
341 MODULE_DESCRIPTION("KS8851 Network driver");