Lines Matching +full:wakeup +full:- +full:capable
1 /* SPDX-License-Identifier: GPL-2.0 */
17 /* Definitions for power management and wakeup registers */
22 #define IGC_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
23 #define IGC_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
24 #define IGC_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
25 #define IGC_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
26 #define IGC_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
62 /* Wakeup Filter Control Extended */
90 /* Loop limit on how long we wait for auto-negotiation to complete */
161 #define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
162 #define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
163 #define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
164 #define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
172 /* 1000BASE-T Control Register */
176 /* 1000BASE-T Status Register */
239 /* 1Gbps and 2.5Gbps half duplex is not supported, nor spec-compliant. */
288 #define IGC_QVECTOR_MASK 0x7FFC /* Q-vector mask */
311 #define IGC_TXD_POPTS_SMD_MASK 0x3000 /* Indicates whether it's SMD-V or SMD-R */
336 #define IGC_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
368 #define IGC_RXD_STAT_SMD_TYPE_V 0x01 /* SMD-V Packet */
369 #define IGC_RXD_STAT_SMD_TYPE_R 0x02 /* SMD-R Packet */
414 /* High-priority RX packet buffer size (KB). Used for Express traffic when preemption is enabled */
418 /* Low-priority RX packet buffer size (KB). Used for BE traffic when preemption is enabled */
451 #define IGC_DTXMXPKTSZ_DEFAULT 0x98 /* 9728-byte Jumbo frames */
646 #define IGC_PTM_STAT_ADJUST_CYC BIT(5) /* 1588 timer adjusted during non-1st PTM cycle */
653 /* GPY211 - I225 defines */
666 #define IGC_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
667 #define IGC_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
671 #define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
692 #define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
693 #define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
711 /* EEE Link-Partner Ability */
716 #define IGC_N0_QUEUE -1
747 /* Minimum time for 100BASE-T where no data will be transmit following move out