Lines Matching full:indirect
218 /* command structures and indirect data structures */
222 * - _data for indirect sent data
223 * - _resp for indirect return data (data which is both will use _data)
286 /* Set ARP Proxy command / response (indirect 0x0104) */
298 /* Set NS Proxy Table Entry Command (indirect 0x0105) */
325 /* Manage MAC Address Read Command (indirect 0x0107) */
405 /* Used by many indirect commands that only pass an seid and a buffer in the
417 /* Get Switch Configuration command (indirect 0x0200)
442 /* Get Switch Configuration (indirect 0x0200)
475 /* Get Switch Resource Allocation (indirect 0x0204) */
559 /* Add VSI (indirect 0x0210)
560 * this indirect command uses struct i40e_aqc_vsi_properties_data
561 * as the indirect buffer (128 bytes)
563 * Update VSI (indirect 0x211)
566 * Get VSI (indirect 0x0212)
752 /* Add MAC-VLAN (indirect 0x0250) */
765 /* indirect data for command and response */
791 /* Remove MAC-VLAN (indirect 0x0251)
808 /* Add VLAN (indirect 0x0252)
809 * Remove VLAN (indirect 0x0253)
953 /* Add Cloud filters (indirect 0x025C)
954 * Remove Cloud filters (indirect 0x025D)
956 * and the generic indirect completion structure
1052 * and the generic indirect completion structure
1080 /* Add Mirror Rule (indirect or direct 0x0260)
1081 * Delete Mirror Rule (indirect or direct 0x0261)
1160 /* Almost all the indirect commands use
1189 /* Configure VSI Bandwidth Limit per Traffic Type (indirect 0x0406)
1204 /* Configure VSI Bandwidth Allocation per Traffic Type (indirect 0x0407)
1217 /* Query vsi bw configuration (indirect 0x0408) */
1232 /* Query VSI Bandwidth Allocation per Traffic Type (indirect 0x040A) */
1257 /* Enable Physical Port ETS (indirect 0x0413)
1258 * Modify Physical Port ETS (indirect 0x0414)
1259 * Disable Physical Port ETS (indirect 0x0415)
1273 /* Configure Switching Component Bandwidth Limits per Tc (indirect 0x0416) */
1288 * (indirect 0x0417)
1300 /* Query Switching Component Configuration (indirect 0x0418) */
1312 /* Query PhysicalPort ETS Configuration (indirect 0x0419) */
1330 * (indirect 0x041A)
1350 * (indirect 0x041D)
1378 /* Get PHY Abilities (indirect 0x0600) uses the generic indirect struct */
1712 /* NVM Read command (indirect 0x0701)
1714 * NVM Update commands (indirect 0x0703)
1733 /* NVM Config Read (indirect 0x0704) */
1745 /* NVM Config Write (indirect 0x0705) */
1774 /* OEM Post Update (indirect 0x0720)
1793 /* Thermal Sensor (indirect 0x0721)
1806 /* Send to PF command (indirect 0x0801) id is only used by PF
1807 * Send to VF command (indirect 0x0802) id is only used by PF
1808 * Send to Peer PF command (indirect 0x0803)
1833 /* Indirect write (indirect 0x0901)
1834 * Indirect read (indirect 0x0903)
1877 /* Get LLDP MIB (indirect 0x0A00) */
1910 /* Add LLDP TLV (indirect 0x0A02)
1911 * Delete LLDP TLV (indirect 0x0A04)
1924 /* Update LLDP TLV (indirect 0x0A03) */
1970 * returns below as indirect response
2041 /* Set Local LLDP MIB (indirect 0x0A08)
2244 /* Scatter/gather Reg Read (indirect 0xFF05)
2245 * Scatter/gather Reg Write (indirect 0xFF06)
2264 /* dump internal data (0xFF08, indirect) */