Lines Matching refs:e_dbg
136 e_dbg("PHY Address %d is out of range\n", offset); in e1000e_read_phy_reg_mdic()
166 e_dbg("MDI Read PHY Reg Address %d did not complete\n", in e1000e_read_phy_reg_mdic()
171 e_dbg("MDI Read PHY Reg Address %d Error\n", offset); in e1000e_read_phy_reg_mdic()
175 e_dbg("MDI Read offset error - requested %d, returned %d\n", in e1000e_read_phy_reg_mdic()
192 e_dbg("Perform retry on PHY transaction...\n"); in e1000e_read_phy_reg_mdic()
215 e_dbg("PHY Address %d is out of range\n", offset); in e1000e_write_phy_reg_mdic()
246 e_dbg("MDI Write PHY Reg Address %d did not complete\n", in e1000e_write_phy_reg_mdic()
251 e_dbg("MDI Write PHY Reg Address %d Error\n", offset); in e1000e_write_phy_reg_mdic()
255 e_dbg("MDI Write offset error - requested %d, returned %d\n", in e1000e_write_phy_reg_mdic()
270 e_dbg("Perform retry on PHY transaction...\n"); in e1000e_write_phy_reg_mdic()
340 e_dbg("Setting page 0x%x\n", page); in e1000_set_page_igp()
781 e_dbg("Error committing the PHY changes\n"); in e1000e_copper_link_setup_m88()
837 e_dbg("Error committing the PHY changes\n"); in e1000e_copper_link_setup_m88()
873 e_dbg("Error resetting the PHY.\n"); in e1000e_copper_link_setup_igp()
886 e_dbg("Error Disabling LPLU D0\n"); in e1000e_copper_link_setup_igp()
995 e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); in e1000_phy_setup_autoneg()
999 e_dbg("Advertise 10mb Half duplex\n"); in e1000_phy_setup_autoneg()
1005 e_dbg("Advertise 10mb Full duplex\n"); in e1000_phy_setup_autoneg()
1011 e_dbg("Advertise 100mb Half duplex\n"); in e1000_phy_setup_autoneg()
1017 e_dbg("Advertise 100mb Full duplex\n"); in e1000_phy_setup_autoneg()
1023 e_dbg("Advertise 1000mb Half duplex request denied!\n"); in e1000_phy_setup_autoneg()
1027 e_dbg("Advertise 1000mb Full duplex\n"); in e1000_phy_setup_autoneg()
1092 e_dbg("Flow control param set incorrectly\n"); in e1000_phy_setup_autoneg()
1100 e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); in e1000_phy_setup_autoneg()
1134 e_dbg("Reconfiguring auto-neg advertisement params\n"); in e1000_copper_link_autoneg()
1137 e_dbg("Error Setting up Auto-Negotiation\n"); in e1000_copper_link_autoneg()
1140 e_dbg("Restarting Auto-Neg\n"); in e1000_copper_link_autoneg()
1160 e_dbg("Error while waiting for autoneg to complete\n"); in e1000_copper_link_autoneg()
1195 e_dbg("Forcing Speed and Duplex\n"); in e1000e_setup_copper_link()
1198 e_dbg("Error Forcing Speed and Duplex\n"); in e1000e_setup_copper_link()
1212 e_dbg("Valid link established!!!\n"); in e1000e_setup_copper_link()
1216 e_dbg("Unable to establish link!!!\n"); in e1000e_setup_copper_link()
1261 e_dbg("IGP PSCR: %X\n", phy_data); in e1000e_phy_force_speed_duplex_igp()
1266 e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); in e1000e_phy_force_speed_duplex_igp()
1274 e_dbg("Link taking longer than expected.\n"); in e1000e_phy_force_speed_duplex_igp()
1313 e_dbg("M88E1000 PSCR: %X\n", phy_data); in e1000e_phy_force_speed_duplex_m88()
1333 e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); in e1000e_phy_force_speed_duplex_m88()
1342 e_dbg("Link taking longer than expected.\n"); in e1000e_phy_force_speed_duplex_m88()
1430 e_dbg("IFE PMC: %X\n", data); in e1000_phy_force_speed_duplex_ife()
1435 e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); in e1000_phy_force_speed_duplex_ife()
1443 e_dbg("Link taking longer than expected.\n"); in e1000_phy_force_speed_duplex_ife()
1490 e_dbg("Half Duplex\n"); in e1000e_phy_force_speed_duplex_setup()
1494 e_dbg("Full Duplex\n"); in e1000e_phy_force_speed_duplex_setup()
1502 e_dbg("Forcing 100mb\n"); in e1000e_phy_force_speed_duplex_setup()
1506 e_dbg("Forcing 10mb\n"); in e1000e_phy_force_speed_duplex_setup()
1936 e_dbg("Phy info is only valid for copper media\n"); in e1000e_get_phy_info_m88()
1945 e_dbg("Phy info is only valid if link is up\n"); in e1000e_get_phy_info_m88()
2011 e_dbg("Phy info is only valid if link is up\n"); in e1000e_get_phy_info_igp()
2069 e_dbg("Phy info is only valid if link is up\n"); in e1000_get_phy_info_ife()
2192 e_dbg("Running IGP 3 PHY init script\n"); in e1000e_phy_init_script_igp3()
2597 e_dbg("Could not set Port Control page\n"); in e1000_enable_phy_wakeup_reg_access_bm()
2603 e_dbg("Could not read PHY register %d.%d\n", in e1000_enable_phy_wakeup_reg_access_bm()
2617 e_dbg("Could not write PHY register %d.%d\n", in e1000_enable_phy_wakeup_reg_access_bm()
2646 e_dbg("Could not set Port Control page\n"); in e1000_disable_phy_wakeup_reg_access_bm()
2653 e_dbg("Could not restore PHY register %d.%d\n", in e1000_disable_phy_wakeup_reg_access_bm()
2695 e_dbg("Attempting to access page %d while gig enabled.\n", in e1000_access_phy_wakeup_reg_bm()
2702 e_dbg("Could not enable PHY wakeup reg access\n"); in e1000_access_phy_wakeup_reg_bm()
2707 e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg); in e1000_access_phy_wakeup_reg_bm()
2712 e_dbg("Could not write address opcode to page %d\n", page); in e1000_access_phy_wakeup_reg_bm()
2727 e_dbg("Could not access PHY reg %d.%d\n", page, reg); in e1000_access_phy_wakeup_reg_bm()
2753 e_dbg("Error reading PHY register\n"); in e1000_power_up_phy_copper()
2776 e_dbg("Error reading PHY register\n"); in e1000_power_down_phy_copper()
2839 e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page, in __e1000_read_phy_reg_hv()
2963 e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page, in __e1000_write_phy_reg_hv()
3062 e_dbg("Could not write the Address Offset port register\n"); in e1000_access_phy_debug_regs_hv()
3073 e_dbg("Could not access the Data port register\n"); in e1000_access_phy_debug_regs_hv()
3100 e_dbg("Error reading PHY register\n"); in e1000_link_stall_workaround_hv()
3180 e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); in e1000_phy_force_speed_duplex_82577()
3188 e_dbg("Link taking longer than expected.\n"); in e1000_phy_force_speed_duplex_82577()
3219 e_dbg("Phy info is only valid if link is up\n"); in e1000_get_phy_info_82577()