196 				 strcmp (media[card_idx], "5") == 0) {  in rio_probe1()
402 		case 5:  in parse_eeprom()
555 	/* DebugCtrl bit 4, 5, 9 must set */  in rio_hw_init()
759 	/* DL2K bug: DMA fails to get next descriptor ptr in 10Mbps mode  in start_xmit()
760 	 * Work around: Always use 1 descriptor in 10Mbps mode */  in start_xmit()
1333 …printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duple…  in rio_set_link_ksettings()
1462 	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */  in mii_read()
1464 	cmd = (0x06 << 10 | phy_addr << 5 | reg_num);  in mii_read()
1488 	/* ST(2), OP(2), ADDR(5), REG#(5), TA(2), Data(16) total 32 bits */  in mii_write()
1540 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media()
1544 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");  in mii_get_media()
1548 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");  in mii_get_media()
1552 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");  in mii_get_media()
1556 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");  in mii_get_media()
1560 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");  in mii_get_media()
1574 			printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media()
1577 			printk (KERN_INFO "Operating at 100 Mbps, ");  in mii_get_media()
1580 			printk (KERN_INFO "Operating at 10 Mbps, ");  in mii_get_media()
1635 		pscr |= 3 << 5;	/* 11'b */  in mii_set_media()
1647 		pscr &= ~(3 << 5);  in mii_set_media()
1663 		/* 5) Set media and Power Up */  in mii_set_media()
1667 			printk (KERN_INFO "Manual 100 Mbps, ");  in mii_set_media()
1669 			printk (KERN_INFO "Manual 10 Mbps, ");  in mii_set_media()
1710 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media_pcs()
1713 			printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");  in mii_get_media_pcs()
1726 		printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media_pcs()