Lines Matching full:qm

181 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
185 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
235 /* [RW 28] The CM header value for QM request (primary). */
237 /* [RW 28] The CM header value for QM request (secondary). */
239 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
243 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
247 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
251 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
266 /* [RW 28] The CM header for QM formatting in case of an error in the QM
1063    follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1064    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1078    PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
1079    [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
1232    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1233    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1247    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1248    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1262    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1263    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1277    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1278    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1460    error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1539  * indication is enabled. [8] - QM Idle Mask. When 1 indicates that the QM
1540  * IDLE indication is disabled. When 0 indicates that the QM IDLE indication
1541  * is enabled. (One bit for both VOQ0 and VOQ1). [9] - QM LB Idle Mask. When
1542  * 1 indicates that the QM IDLE indication for LOOPBACK is disabled. When 0
1543  * indicates that the QM IDLE indication for LOOPBACK is enabled. [10] - L1
1590  * that the BRB1 EMPTY indication is enabled. [8] - QM Idle Mask. When 1
1591  * indicates that the QM IDLE indication is disabled. When 0 indicates that
1592  * the QM IDLE indication is enabled. (One bit for both VOQ0 and VOQ1). [9]
1593  * - QM LB Idle Mask. When 1 indicates that the QM IDLE indication for
1594  * LOOPBACK is disabled. When 0 indicates that the QM IDLE indication for
3595 /* [RW 2] QM byte swapping mode configuration for master read requests */
3770 /* [RW 2] Endian mode for qm */
3774 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
3989 /* [RW 16] The byte credit value that if above the QM is considered almost
4085 /* [R 24] The number of tasks stored in the QM for the PF. only even
4249 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
4265 /* [RW 16] The credit value that if above the QM is considered almost full */
4475 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4581 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4585 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4597 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4601 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4605 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4609 /* [RW 28] The CM header value for QM request (primary). */
4611 /* [RW 28] The CM header value for QM request (secondary). */
4613 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
5006 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
5121 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5125 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
5127 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5131 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
5135 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
5139 /* [RW 28] The CM header value for QM request (primary). */
5141 /* [RW 28] The CM header value for QM request (secondary). */
5143 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
5505 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
5671 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
5675 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
5677 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
5679 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
5683 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
5687 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
5691 /* [RW 28] The CM header value for QM request (primary). */
5693 /* [RW 28] The CM header value for QM request (secondary). */
5695 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;