Lines Matching +full:6390 +full:x
65 dev_dbg(chip->dev, "<- addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n", in mv88e6xxx_read()
81 dev_dbg(chip->dev, "-> addr: 0x%.2x reg: 0x%.2x val: 0x%.4x\n", in mv88e6xxx_write()
615 "p%d: invalid port mode in status register: %04x\n", in mv88e6250_setup_supported_interfaces()
778 * Port 2 can also support 1000BASE-X in automedia mode if port 9 is in mv88e6390x_phylink_get_caps()
779 * configured for 1000BASE-X, SGMII or 2500BASE-X. in mv88e6390x_phylink_get_caps()
780 * Port 3-4 can also support 1000BASE-X in automedia mode if port 9 is in mv88e6390x_phylink_get_caps()
781 * configured for RXAUI, 1000BASE-X, SGMII or 2500BASE-X. in mv88e6390x_phylink_get_caps()
783 * Port 5 can also support 1000BASE-X in automedia mode if port 10 is in mv88e6390x_phylink_get_caps()
784 * configured for 1000BASE-X, SGMII or 2500BASE-X. in mv88e6390x_phylink_get_caps()
785 * Port 6-7 can also support 1000BASE-X in automedia mode if port 10 is in mv88e6390x_phylink_get_caps()
786 * configured for RXAUI, 1000BASE-X, SGMII or 2500BASE-X. in mv88e6390x_phylink_get_caps()
788 * For now, be permissive (as the old code was) and allow 1000BASE-X in mv88e6390x_phylink_get_caps()
822 /* 6191X supports >1G modes only on port 10 */ in mv88e6393x_phylink_get_caps()
3684 /* The 6390 copper ports have an errata which require poking magic
6478 dev_info(chip->dev, "switch 0x%x detected: %s, revision %u\n", in mv88e6xxx_detect()