Lines Matching full:this
20 This is the core driver for CS5535/CS5536 MFD functions. This is
31 expander, PWM and keypad controller. This includes the I2C driver and
42 using the SPI interface. This driver provides common support for
52 Select this to get System Manager support for all Altera branded
63 Support for the ACT8945A PMIC from Active-semi. This device
76 Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
77 This driver will only map the hardware interrupt and registers, you
78 have to select individual drivers based on this MFD to be able to use
79 the ADC or the thermal sensor. This will try to probe the ADC driver
82 To compile this driver as a module, choose M here: the module will be
123 Multifunction Power Management IC. This includes
136 This driver provides common support for accessing the device,
145 Select this to get support for AT91 USART IP. This is a wrapper
148 function of this MFD driver according to a device tree property.
155 Select this to get support for Atmel Flexcom. This is a wrapper
158 by the probe function of this MFD driver according to a device tree
168 This driver provides common support for accessing the device,
195 This driver can also be built as a module. If so, the module
205 This driver include only the core APIs. You have to select individual
221 This driver include only the core APIs. You have to select individual
225 Note on x86 this provides an ACPI OpRegion, so this must be 'y'
237 This driver include only the core APIs. You have to select individual
246 This is the core driver of the Board Controller found on some Congatec
250 To compile this driver as a module, choose M here: the module will be
259 Select this to get support for ChromeOS Embedded Controller
260 sub-devices. This driver will instantiate additional drivers such
263 To compile this driver as a module, choose M here: the module will be
278 Select this to support the Cirrus Logic CS40L50 Haptic
281 This driver can be built as a module. If built as a module it will be
290 Select this to support the Cirrus Logic CS40L50 Haptic
293 This driver can be built as a module. If built as a module it will be
308 Select this to support the Cirrus Logic CS42L43 PC CODEC with
317 Select this to support the Cirrus Logic CS42L43 PC CODEC with
343 various features. The MFD core device handles this protocol and
416 Select this option to enable support for Delta Networks TN48M switch
427 usually found on PXA processors-based platforms. This includes
444 when controlled using SPI. This driver provides common support
456 when controlled using I2C. This driver provides common support
467 Say yes here for support of Dialog Semiconductor DA9055. This is
468 a Power Management IC. This driver provides common support for
482 This includes the I2C driver and core APIs.
494 This includes the I2C driver and core APIs.
505 This adds support for the DA9150 integrated charger and fuel-gauge
506 chip. This driver provides common support for accessing the device.
515 This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
526 This adds support for the power-off functionality and access to
537 Select this option to enable support for Samsung Exynos Low Power
553 This driver provides common support for accessing the device.
564 This driver provides common support for accessing the device,
574 Select this if your MC13xxx is connected via an SPI bus.
582 Select this if your MC13xxx is connected via an I2C bus.
590 Select this option to enable support for Monolithic Power Systems
591 battery charger. This provides ADC, thermal and battery charger power
602 processors. This driver provides common support for accessing the
608 This driver can also be built as a module. If so, the module will be
627 Say yes here to add support for NXP PF1550. This is a companion Power
629 This driver provides common support for accessing the device;
633 This driver can also be built as a module and if so will be called
644 This driver includes core APIs _only_. You have to select
660 This driver includes core APIs _only_. You have to select
673 Select this option to enable Hisilicon hi655x series pmic driver.
682 This MFD provides support for I2C and GPIO that exist only
694 many functional units. This driver provides needed support for
715 Select this option to enable support for Crystal Cove PMIC
720 This option is a bool as it provides an ACPI OpRegion which must be
721 available before any devices using it are probed. This option also
730 Select this option to enable support for Whiskey Cove PMIC
744 Select this option to enable support for the Intel Cherry Trail
747 This option is a bool as it provides an ACPI OpRegion which must be
748 available before any devices using it are probed. This option also
761 Select this option for supporting Dollar Cove (TI version) PMIC
764 This option is a bool as it provides an ACPI OpRegion which must be
765 available before any devices using it are probed. This option also
776 Select this option for supporting Basin Cove PMIC device
789 This driver supports Intel Low Power Subsystem (LPSS) devices such as
798 This driver supports Intel Low Power Subsystem (LPSS) devices such as
810 This driver provides support for the PMC (Power Management
813 Register and P-unit access. In addition this creates devices
821 Select this to get support for the Microcontroller found in
822 the Compaq iPAQ handheld computers. This is an Atmel
824 firmware using the custom protocol implemented in this driver.
836 To compile this driver as a module, choose M here: the module will
844 This is the core driver for the Janz CMOD-IO PCI MODULbus
845 carrier board. This device is a PCI to MODULbus bridge which may
853 This is the core driver for the PLD (Programmable Logic Device) found
858 This driver can also be built as a module. If so, the module
868 This supports for Marvell 88PM800 Power Management IC.
869 This includes the I2C driver and the core APIs _only_, you have to
880 This supports for Marvell 88PM805 Power Management IC. This includes
891 This supports for Marvell 88PM8606/88PM8607 Power Management IC.
892 This includes the I2C driver and the core APIs _only_, you have to
904 This enables support for Marvell 88PM886 Power Management IC.
905 This includes the I2C driver and the core APIs _only_, you have to
913 This driver controls a Maxim 5970/5978 switch via I2C bus.
928 This driver provides common support for accessing the device;
940 MAX77540 Power Management ICs. This driver provides
956 RTC, regulators, clock generator, watchdog etc. This driver
969 MAX77651 Power Management ICs. This is the core multifunction
986 This driver provides common support for accessing the device;
998 This is a companion Power Management IC with Flash, Haptic, Charger,
1000 This driver provides common support for accessing the device;
1011 This is a Power Management IC with Charger, safe LDOs, Flash, Haptic
1013 This driver provides common support for accessing the device;
1025 This is a Power Management IC with 4 buck regulators, 9
1026 low-dropout regulators, 8 GPIOs, RTC, watchdog etc. This driver
1041 This is a companion Power Management IC for USB Type-C applications
1044 This driver provides common support for accessing the device;
1048 To compile this driver as a module, choose M here: the module will be
1059 This is companion Power Management IC with LEDs, Haptic, Charger,
1061 This driver provides common support for accessing the device;
1072 Say yes here to add support for Maxim Semiconductor MAX8907. This is
1073 a Power Management IC. This driver provides common support for
1082 Say yes here to add support for Maxim Semiconductor MAX8925. This is
1083 a Power Management IC. This driver provides common support for
1094 This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
1096 This driver provides common support for accessing the device;
1107 National Semiconductor LP3974. This is a Power Management IC.
1108 This driver provides common support for accessing the device,
1138 This driver can also be built as a module. If so, the module
1146 Say yes here to add support for MediaTek MT6397 PMIC. This is
1147 a Power Management IC. This driver provides common support for
1159 This driver provides common support for accessing the devices;
1163 This driver can also be built as a module. If so the module
1171 This enables support for the Nuvoton USB device NCT6694, which shares
1176 This driver provides core APIs to access the NCT6694 hardware
1197 To compile this driver as a module, choose M here: the module will be
1255 If you say yes to this option, support will be included for the
1258 This is required if your board has a PM8xxx and uses its features,
1262 module. This will build a module called "pm8xxx-core".
1268 If you say yes to this option, support will be included for the
1272 This is required to access many regulators, clocks and bus
1276 module. This will build a module called "qcom_rpm".
1285 This option supports the I2C-based SpacemiT P1 PMIC, which
1287 This option is selected when any of the supported sub-devices
1298 This enables support for the Qualcomm SPMI PMICs.
1300 SoCs. Note, that this will only be useful paired with descriptions
1331 This enables support for the Richtek RT4831 that includes 4 channel
1342 This driver provides for the Richtek RT5033 Power Management IC,
1343 which includes the I2C driver and the Core APIs. This driver provides
1366 Select this option to get support for the RICOH583 Power
1368 This driver provides common support for accessing the device
1388 This driver provides common support for accessing the device
1402 This driver provides common support for accessing the device
1416 This driver provides common support for accessing the device,
1432 This is a Power Management IC for mobile applications with buck
1435 This driver provides common support for accessing the device;
1439 To compile this driver as a module, choose M here: the module will be
1451 This driver provides common support for accessing the device,
1455 To compile this driver as a module, choose M here: the
1458 on this driver so building this as a module might require proper
1467 This is the core driver for the SI476x series of AM/FM
1468 radio. This MFD driver connects the radio-si476x V4L2 module
1471 To compile this driver as a module, choose M here: the
1480 This driver creates a single register map with the intention for it
1503 This is the core driver for the Silicon Motion SM501 multimedia
1504 companion chip. This device is a multifunction device which may
1514 This option uses the gpio library layer to export the 64 GPIO
1524 This is the core driver for the Skyworks SKY81452 backlight and
1527 This driver can also be built as a module. If so, the module
1538 This enables support for the Spreadtrum SC27xx PMICs with SPI
1543 This driver provides common support for accessing the SC27xx PMICs,
1551 Select this option to enable Renesas RZ/G2L MTU3a core driver for
1563 chips. This core driver expose register access functions.
1575 Select this option to enable access to AB8500 power management
1576 chip. This connects to U8500 either on the SSP/SPI bus (deprecated
1579 This chip embeds various other multimedia functionalities as well.
1586 Select this option to enable support for the DB8500 Power Reset
1587 and Control Management Unit. This is basically an autonomous
1608 This driver provides common support for accessing the device,
1625 This is used to enable I2C interface of STMPE
1631 This is used to enable SPI interface of STMPE
1641 hardware, but they do not use this driver.
1647 Select this option to enable accessing system control registers
1659 To compile this driver as a module, choose M here: the
1669 This driver consists of GPIO and PWM drivers.
1711 This is the core driver for the OAMP EHCI and OHCI drivers.
1712 This MFD driver does the required setup functionalities for
1733 This option enables a driver for the TP61050/TPS61052
1734 high-power "white LED driver". This boost converter is
1748 This driver can also be built as a module. If so, the module
1760 This driver can also be built as a module. If so, the module
1773 This driver provides common support for accessing the device,
1789 This driver provides common support for accessing the device,
1806 This driver can also be built as a module. If so, the module
1820 This driver can also be built as a module. If so, the module
1834 This driver can also be built as a module. If so, the module
1849 This driver can also be built as a module. If so, the module
1863 This driver can also be built as a module. If so, the module
1874 This driver provides common support for accessing the device,
1878 This driver can also be built as a module. If so, the module
1933 This driver can also be built as a module. If so, the module
1946 This driver can also be built as a module. If so, the module
1957 This core driver provides register access and IRQ handling
1975 This driver uses board-specific data to initialize the resources
1995 This driver provides common support for accessing the device,
2004 TWL92330/Menelaus Power Management chip. This include voltage
2018 This driver provides common support for accessing the device;
2027 This is the core driver for the timberdale FPGA. This device is a
2041 This driver provides common support for accessing the device,
2060 and/or vx855_gpio drivers for this to do anything useful.
2124 CODEC. This driver provides common support for accessing
2140 when controlled using I2C. This driver provides common support
2153 when controlled using SPI. This driver provides common support
2168 systems. This option enables core support for the WM8350 with
2182 supported via the relevant subsystems. This driver provides
2196 supported via the relevant subsystems. This driver provides core
2206 Select this option to enable the STw481x chip driver used
2223 Select this option to get support for the ROHM BD71837
2237 Select this option to get support for the ROHM BD71815, BD71828,
2255 Select this option to get support for the ROHM BD9576MUF and
2267 Select this option to get support for the ROHM BD96801 Power
2279 Select this option to enable STM32 Low-Power Timer driver
2283 To compile this driver as a module, choose M here: the
2293 Select this option to enable STM32 timers driver used
2294 for PWM and IIO Timer. This driver allow to share the
2306 the relevant subsystems. This driver provides core support for the
2310 To compile this driver as a module, choose M here: the
2322 This driver provides common support for accessing the device,
2335 This driver provides common support WCD934x audio codec and its
2352 This driver provides common support for accessing the ATC2603C
2366 This Microcontroller is present on the Khadas VIM1, VIM2, VIM3 and
2373 This driver provides common support for accessing the device,
2395 Select this option to get support for the Qualcomm Technologies, Inc.
2398 support functions into a single IC. This driver provides common
2443 Select this to get support for the Supervisory Processor
2451 This option enables basic support for the SGI IOC3-based
2452 controller cards. This option does not enable any specific
2474 This driver provides common support for accessing the device,
2486 This driver provides common support for accessing the device,
2508 multiple sub-devices like display and IPMI. This driver provides common
2519 Select this to get support for the QNAP MCU device found in
2524 This driver implements the base serial protocol to talk to the
2534 Clockmatrix and 82P33XXX series. This option supports I2C as
2537 This driver provides common support for accessing the device.
2548 Clockmatrix and 82P33XXX series. This option supports SPI as
2551 This driver provides common support for accessing the device.
2560 Select this option to enable the AAEON UP and UP^2 onboard FPGA.
2561 This is the core driver of this FPGA, which has a pin controller and a
2564 To compile this driver as a module, choose M here: the module will be
2577 This driver provides common support for accessing the device;