Lines Matching +full:gpio +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0-only
11 select IRQ_DOMAIN
16 select MFD_CORE
21 necessary for using the board's GPIO and MFGPT functionality.
25 select MFD_CORE
26 select REGMAP_I2C
30 Say yes here to add support for the Analog Devices ADP5585 GPIO
32 the core APIs _only_, you have to select individual components like
33 the GPIO and PWM functions under the corresponding menus.
38 select REGMAP_SPI
39 select MFD_CORE
43 accessing the external gpio extender (LEDs & buttons) and
49 select MFD_SYSCON
51 Select this to get System Manager support for all Altera branded
57 tristate "Active-semi ACT8945A"
58 select MFD_CORE
59 select REGMAP_I2C
62 Support for the ACT8945A PMIC from Active-semi. This device
63 features three step-down DC/DC converters and four low-dropout
69 select MFD_CORE
70 select REGMAP_MMIO
71 select REGMAP_IRQ
75 Select this to get support for Allwinner SoCs (A10, A13 and A31) ADC.
77 have to select individual drivers based on this MFD to be able to use
79 sun4i-gpadc-iio and the hwmon driver iio_hwmon.
82 called sun4i-gpadc.
86 select MFD_CORE
87 select REGMAP_I2C
88 select REGMAP_IRQ
96 select MFD_CORE
97 select REGMAP_I2C
107 select MFD_CORE
108 select REGMAP_I2C
109 select REGMAP_IRQ
113 tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
123 the I2C driver and the core APIs _only_, you have to select
129 select MFD_CORE
140 select MFD_CORE
143 Select this to get support for AT91 USART IP. This is a wrapper
144 over at91-usart-serial driver and usart-spi-driver. Only one function
150 select MFD_CORE
153 Select this to get support for Atmel Flexcom. This is a wrapper
160 tristate "Atmel HLCDC (High-end LCD Controller)"
161 select MFD_CORE
162 select REGMAP_MMIO
172 select MFD_SYSCON
176 select MFD_CORE
177 select REGMAP_I2C
184 select MFD_CORE
185 select REGMAP_I2C
186 select REGMAP_IRQ
190 voltage regulator, voltage sampling units, GPIO block and
197 tristate "X-Powers AC100"
198 select MFD_CORE
201 If you say Y here you get support for the X-Powers AC100 audio codec
203 This driver include only the core APIs. You have to select individual
208 select MFD_CORE
209 select REGMAP_IRQ
212 tristate "X-Powers AXP series PMICs with I2C"
213 select MFD_AXP20X
214 select REGMAP_I2C
217 If you say Y here you get support for the X-Powers AXP series power
219 This driver include only the core APIs. You have to select individual
229 tristate "X-Powers AXP series PMICs with RSB"
230 select MFD_AXP20X
233 If you say Y here you get support for the X-Powers AXP series power
235 This driver include only the core APIs. You have to select individual
241 select MFD_CORE
246 I2C busses, and GPIO controller.
249 called cgbc-core.
253 select MFD_CORE
257 Select this to get support for ChromeOS Embedded Controller
258 sub-devices. This driver will instantiate additional drivers such
259 as RTC, USBPD, etc. but you have to select the individual drivers.
262 called cros-ec-dev.
266 select MFD_CORE
267 select REGMAP
268 select REGMAP_IRQ
273 select REGMAP_I2C
274 select MFD_CS42L43
276 Select this to support the Cirrus Logic CS42L43 PC CODEC with
282 select REGMAP_SOUNDWIRE
283 select MFD_CS42L43
285 Select this to support the Cirrus Logic CS42L43 PC CODEC with
290 select MFD_CORE
291 select REGMAP
292 select REGMAP_IRQ
293 select MADERA_IRQ
294 select PINCTRL
295 select PINCTRL_MADERA
303 select REGMAP_I2C
312 select REGMAP_SPI
320 select MFD_SIMPLE_MFD_I2C
329 select PINCTRL_CS47L15
336 select PINCTRL_CS47L35
343 select PINCTRL_CS47L85
350 select PINCTRL_CS47L90
357 select PINCTRL_CS47L92
368 usually found on PXA processors-based platforms. This includes
369 the I2C driver and the core APIs _only_, you have to select
371 LEDs and battery-charger under the corresponding menus.
375 select MFD_CORE
379 select REGMAP_SPI
380 select REGMAP_IRQ
381 select PMIC_DA9052
391 select REGMAP_I2C
392 select REGMAP_IRQ
393 select PMIC_DA9052
403 select REGMAP_I2C
404 select REGMAP_IRQ
405 select MFD_CORE
416 select MFD_CORE
417 select REGMAP_I2C
418 select REGMAP_IRQ
429 select MFD_CORE
430 select REGMAP_I2C
431 select REGMAP_IRQ
440 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
442 select MFD_CORE
443 select REGMAP_I2C
444 select REGMAP_IRQ
446 This adds support for the DA9150 integrated charger and fuel-gauge
453 select MFD_CORE
456 This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
457 DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
465 select MFD_CORE
467 This adds support for the power-off functionality and access to
475 select MFD_CORE
476 select REGMAP_MMIO
478 Select this option to enable support for Samsung Exynos Low Power
486 select MFD_CORE
487 select REGMAP_I2C
488 select REGMAP_IRQ
492 such as push-button monitor, multiple ADC's for voltage and
501 select MFD_CORE
502 select REGMAP_IRQ
512 select REGMAP_SPI
513 select MFD_MC13XXX
515 Select this if your MC13xxx is connected via an SPI bus.
520 select REGMAP_I2C
521 select MFD_MC13XXX
523 Select this if your MC13xxx is connected via an I2C bus.
528 select REGMAP_I2C
529 select MFD_CORE
531 Select this option to enable support for Monolithic Power Systems
538 select MFD_CORE
539 select STMP_DEVICE
542 Analog-to-Digital Converter (LRADC) found on the i.MX23 and i.MX28
546 mxs-lradc-adc for ADC readings
547 mxs-lradc-ts for touchscreen support
550 called mxs-lradc.
554 select REGMAP_MMIO
564 select MFD_CORE
565 select REGMAP_MMIO
567 Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
569 This driver includes core APIs _only_. You have to select
572 We communicate with the Hi6421 via memory-mapped I/O.
578 select MFD_CORE
579 select REGMAP_SPMI
582 multi-functions, such as regulators, RTC, codec, Coulomb counter,
585 This driver includes core APIs _only_. You have to select
594 select MFD_CORE
595 select REGMAP_MMIO
596 select REGMAP_IRQ
598 Select this option to enable Hisilicon hi655x series pmic driver.
601 tristate "Intel Quark MFD I2C GPIO"
605 select MFD_CORE
607 This MFD provides support for I2C and GPIO that exist only
610 The GPIO exports a total amount of 8 interrupt-capable GPIOs.
615 select MFD_CORE
616 select P2SB if X86
620 other drivers to control these functions, currently GPIO and
626 select MFD_CORE
636 select MFD_CORE
637 select REGMAP_I2C
638 select REGMAP_IRQ
640 Select this option to enable support for Crystal Cove PMIC
641 on some Intel SoC systems. The PMIC provides ADC, GPIO,
647 causes the designware-i2c driver to be builtin for the same reason.
652 select MFD_CORE
653 select REGMAP_IRQ
655 Select this option to enable support for Whiskey Cove PMIC
656 on Intel Broxton systems. The PMIC provides ADC, GPIO,
665 select MFD_CORE
666 select REGMAP_I2C
667 select REGMAP_IRQ
669 Select this option to enable support for the Intel Cherry Trail
674 causes the designware-i2c driver to be builtin for the same reason.
682 select MFD_CORE
683 select REGMAP_I2C
684 select REGMAP_IRQ
686 Select this option for supporting Dollar Cove (TI version) PMIC
691 needs the designware-i2c driver to be builtin for the same reason.
698 select MFD_CORE
699 select REGMAP_IRQ
701 Select this option for supporting Basin Cove PMIC device
706 select COMMON_CLK
707 select MFD_CORE
711 select MFD_INTEL_LPSS
715 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
720 select MFD_INTEL_LPSS
724 I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
732 select INTEL_SCU_IPC
733 select MFD_CORE
737 multi-function device that exposes IPC, General Control
738 Register and P-unit access. In addition this creates devices
744 select MFD_CORE
746 Select this to get support for the Microcontroller found in
754 select MFD_CORE
755 select REGMAP_I2C
758 IQS621, IQS622, IQS624 and IQS625 multi-function sensors. Additional
759 options must be selected to enable device-specific functions.
765 tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
766 select MFD_CORE
769 This is the core driver for the Janz CMOD-IO PCI MODULbus
772 CAN and GPIO controllers.
776 select MFD_CORE
781 functions like watchdog, GPIO, UART and I2C bus.
784 will be called kempld-core.
789 select REGMAP_I2C
790 select REGMAP_IRQ
791 select MFD_CORE
795 select individual components like voltage regulators, RTC and
796 battery-charger under the corresponding menus.
801 select REGMAP_I2C
802 select REGMAP_IRQ
803 select MFD_CORE
806 the I2C driver and the core APIs _only_, you have to select individual
813 select REGMAP_I2C
814 select MFD_CORE
818 select individual components like voltage regulators, RTC and
819 battery-charger under the corresponding menus.
825 select REGMAP_I2C
826 select REGMAP_IRQ
827 select MFD_CORE
831 select individual components like onkey under the corresponding menus.
836 select MFD_CORE
837 select REGMAP_I2C
838 select REGMAP_IRQ
839 select IRQ_DOMAIN
842 MAX77836 Micro-USB ICs with battery charger.
850 select MFD_CORE
851 select REGMAP_I2C
852 select REGMAP_IRQ
864 select MFD_CORE
865 select REGMAP_I2C
866 select REGMAP_IRQ
867 select IRQ_DOMAIN
879 select MFD_CORE
880 select REGMAP_I2C
881 select REGMAP_IRQ
887 the following functionalities of the device: GPIO, regulator,
894 select MFD_CORE
895 select REGMAP_I2C
896 select REGMAP_IRQ
897 select IRQ_DOMAIN
908 select MFD_CORE
909 select REGMAP_I2C
910 select REGMAP_IRQ
923 select MFD_CORE
924 select REGMAP_I2C
928 low-dropout regulators, 8 GPIOs, RTC, watchdog etc. This driver
936 select MFD_CORE
937 select REGMAP_I2C
938 select REGMAP_IRQ
949 select MFD_CORE
951 select REGMAP_I2C
952 select REGMAP_IRQ
962 select MFD_CORE
972 select MFD_CORE
973 select IRQ_DOMAIN
985 select MFD_CORE
986 select IRQ_DOMAIN
996 select MFD_CORE
997 select REGMAP_I2C
998 select REGMAP_IRQ
999 select CRC8
1004 PMIC part includes 2-channel BUCKs and 2-channel LDOs
1005 LDO part includes 4-channel LDOs
1009 select MFD_CORE
1010 select REGMAP_I2C
1011 select REGMAP_IRQ
1017 voltage supply, one general purpose LDO, and the USB Type-C & PD
1018 controller complies with the latest USB Type-C and PD standards.
1025 select MFD_CORE
1026 select IRQ_DOMAIN
1036 select MFD_CORE
1040 The device supports multiple sub-devices like LED, HWMON and WDT.
1051 select MFD_CORE
1052 select REGMAP_SPI
1065 called ocelot-soc.
1080 select MFD_CORE
1081 select REGMAP_SPI
1082 select REGMAP_IRQ
1090 select MFD_CORE
1099 You need to select the mfd cell drivers separately.
1106 select REGMAP_I2C
1107 select MFD_CORE
1110 certain e-book readers designed by the original design manufacturer
1114 tristate "Nokia Retu and Tahvo multi-function device"
1115 select MFD_CORE
1117 select REGMAP_IRQ
1119 Retu and Tahvo are a multi-function devices found on Nokia
1125 select REGMAP_I2C
1130 so that function-specific drivers can bind to them.
1140 tristate "NXP PCF50633 GPIO"
1143 Say yes here if you want to include support GPIO for pins on
1149 select IRQ_DOMAIN_HIERARCHY
1150 select MFD_CORE
1151 select REGMAP
1154 built-in PM8xxx PMIC chips.
1160 module. This will build a module called "pm8xxx-core".
1181 select REGMAP_SPMI
1189 series as a module. The module will be called "qcom-spmi-pmic".
1194 select MFD_SIMPLE_MFD_I2C
1198 To enable support for building sub-devices as modules,
1202 tristate "RDC R-321x southbridge"
1203 select MFD_CORE
1206 Say yes here if you want to have support for the RDC R-321x SoC
1213 select MFD_CORE
1214 select REGMAP_I2C
1223 select MFD_CORE
1224 select REGMAP_I2C
1225 select REGMAP_IRQ
1230 sub-devices like charger, fuel gauge, flash LED, current source,
1236 select MFD_CORE
1237 select REGMAP_I2C
1238 select REGMAP_IRQ
1248 select MFD_CORE
1249 select REGMAP_I2C
1251 Select this option to get support for the RICOH583 Power
1254 through i2c interface. The device supports multiple sub-devices
1255 like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
1261 select MFD_CORE
1266 select MFD_CORE
1267 select REGMAP_I2C
1268 select REGMAP_IRQ
1269 select MFD_RK8XX
1274 through I2C interface. The device supports multiple sub-devices
1280 select MFD_CORE
1281 select REGMAP_SPI
1282 select REGMAP_IRQ
1283 select MFD_RK8XX
1288 through an SPI interface. The device supports multiple sub-devices
1289 including interrupts, LDO & DCDC regulators, and power on-key.
1295 select MFD_CORE
1296 select REGMAP_I2C
1297 select REGMAP_IRQ
1309 select MFD_CORE
1310 select REGMAP_I2C
1311 select REGMAP_IRQ
1320 module will be called sec-core.
1328 select MFD_CORE
1329 select REGMAP_I2C
1332 radio. This MFD driver connects the radio-si476x V4L2 module
1336 module will be called si476x-core.
1341 select MFD_CORE
1342 select REGMAP_I2C
1345 to be shared by all sub-devices.
1348 sub-devices represented by child nodes in Device Tree will be
1355 select MFD_SIMPLE_MFD_I2C
1361 * SMARC-sAL28
1375 bool "Export GPIO via GPIO layer"
1378 This option uses the gpio library layer to export the 64 GPIO
1380 base number for the first GPIO line to register.
1384 select MFD_CORE
1385 select REGMAP_I2C
1398 select MFD_CORE
1399 select REGMAP_SPI
1400 select REGMAP_IRQ
1413 select MFD_CORE
1415 Select this option to enable Renesas RZ/G2L MTU3a core driver for
1416 the Multi-Function Timer Pulse Unit 3 (MTU3a) hardware available
1422 bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
1433 bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
1435 select POWER_SUPPLY
1436 select MFD_CORE
1437 select IRQ_DOMAIN
1439 Select this option to enable access to AB8500 power management
1446 bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
1448 select MFD_CORE
1450 Select this option to enable support for the DB8500 Power Reset
1459 select MFD_CORE
1466 STMPE811: GPIO, Touchscreen, ADC
1467 STMPE1601: GPIO, Keypad
1468 STMPE1801: GPIO, Keypad
1469 STMPE2401: GPIO, Keypad
1470 STMPE2403: GPIO, Keypad
1476 GPIO: stmpe-gpio
1477 Keypad: stmpe-keypad
1478 Touchscreen: stmpe-ts
1479 ADC: stmpe-adc
1501 select MFD_CORE
1502 select REGMAP_MMIO
1507 select MFD_CORE
1515 select REGMAP_MMIO
1517 Select this option to enable accessing system control registers
1523 select MFD_CORE
1524 select REGMAP
1525 select REGMAP_MMIO
1535 select MFD_CORE
1536 select REGMAP_I2C
1539 This driver consists of GPIO and PWM drivers.
1541 general usage such like a GPIO controller and a PWM controller.
1546 select MFD_CORE
1547 select REGMAP_I2C
1548 select IRQ_DOMAIN
1556 select MFD_CORE
1557 select REGMAP_I2C
1576 select MFD_CORE
1577 select REGMAP_I2C
1578 select REGMAP_IRQ
1587 select REGMAP_I2C
1588 select REGULATOR
1589 select MFD_CORE
1590 select REGULATOR_FIXED_VOLTAGE
1593 high-power "white LED driver". This boost converter is
1595 also contains a GPIO pin.
1612 select MFD_CORE
1624 select MFD_CORE
1625 select REGMAP
1626 select REGMAP_IRQ
1627 select REGMAP_I2C
1642 select MFD_CORE
1643 select REGMAP_I2C
1644 select REGMAP_IRQ
1655 select MFD_CORE
1656 select REGMAP_I2C
1657 select IRQ_DOMAIN
1671 select MFD_CORE
1672 select REGMAP_I2C
1685 select MFD_CORE
1686 select REGMAP_I2C
1699 select MFD_CORE
1700 select REGMAP_I2C
1701 select REGMAP_IRQ
1705 These include voltage regulators, gpio and other features
1714 select MFD_CORE
1715 select REGMAP_I2C
1716 select REGMAP_IRQ
1728 select MFD_CORE
1729 select REGMAP_I2C
1744 select MFD_CORE
1745 select REGMAP_I2C
1746 select REGMAP_IRQ
1747 select IRQ_DOMAIN
1754 select MFD_CORE
1755 select REGMAP
1756 select REGMAP_IRQ
1760 select MFD_TPS65912
1761 select REGMAP_I2C
1769 select MFD_TPS65912
1770 select REGMAP_SPI
1778 select MFD_CORE
1779 select REGMAP
1780 select REGMAP_IRQ
1784 select MFD_TPS6594
1785 select REGMAP_I2C
1786 select CRC8
1793 will be called tps6594-i2c.
1797 select MFD_TPS6594
1798 select REGMAP_SPI
1799 select CRC8
1806 will be called tps6594-spi.
1811 select IRQ_DOMAIN
1812 select MFD_CORE
1813 select REGMAP_I2C
1818 so that function-specific drivers can bind to them.
1820 These multi-function chips are found on many OMAP2 and OMAP3
1821 boards, providing power management, RTC, GPIO, keypad, a
1834 This driver uses board-specific data to initialize the resources
1841 select MFD_CORE
1847 select MFD_CORE
1848 select REGMAP_I2C
1849 select REGMAP_IRQ
1864 regulators, Dual slot memory card transceivers, real-time clock
1871 select MFD_CORE
1875 driver connects the radio-wl1273 V4L2 module and the wl1273
1881 select MFD_CORE
1882 select REGMAP_I2C
1889 backlight or ambient-light-sensor functionality of the device.
1893 select MFD_CORE
1900 for in-vehicle infontainment, called Russellville.
1906 select MFD_CORE
1915 tristate "TQ-Systems IO controller TQMX86"
1916 select MFD_CORE
1919 TQ-Systems IO controller and watchdog device, found on their
1925 select MFD_CORE
1933 select MFD_CORE
1934 select REGMAP_I2C
1940 select REGMAP
1941 select REGMAP_IRQ
1942 select MFD_CORE
1947 select MFD_ARIZONA
1948 select REGMAP_I2C
1956 select MFD_ARIZONA
1957 select REGMAP_SPI
1996 select MFD_CORE
1998 select REGMAP_I2C
2010 select MFD_CORE
2011 select MFD_WM831X
2012 select REGMAP_I2C
2013 select IRQ_DOMAIN
2023 select MFD_CORE
2024 select MFD_WM831X
2025 select REGMAP_SPI
2026 select IRQ_DOMAIN
2039 select MFD_WM8350
2040 select REGMAP_I2C
2051 select MFD_CORE
2052 select REGMAP_I2C
2053 select REGMAP_IRQ
2056 The WM8994 is a highly integrated hi-fi CODEC designed for
2058 has on board GPIO and regulator functionality which is
2065 select MFD_CORE
2066 select REGMAP_AC97
2067 select AC97_BUS_COMPAT
2070 The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
2072 it has on board GPIO and a touchscreen functionality which is
2080 select REGMAP_I2C
2081 select MFD_CORE
2083 Select this option to enable the STw481x chip driver used
2084 in various ST Microelectronics and ST-Ericsson embedded
2091 select REGMAP_I2C
2092 select REGMAP_IRQ
2093 select MFD_CORE
2095 Select this option to get support for the ROHM BD71837
2104 select REGMAP_I2C
2105 select REGMAP_IRQ
2106 select MFD_CORE
2108 Select this option to get support for the ROHM BD71828 and BD71815
2109 Power Management ICs. BD71828GW and BD71815AGW are single-chip power
2110 management ICs mainly for battery-powered portable devices.
2113 also a single-cell linear charger, a Coulomb counter, a real-time
2120 select REGMAP_I2C
2121 select REGMAP_IRQ
2122 select MFD_CORE
2124 Select this option to get support for the ROHM BD9576MUF and
2126 designed to be used to power R-Car series processors.
2132 select REGMAP_I2C
2133 select REGMAP_IRQ
2134 select MFD_CORE
2136 Select this option to get support for the ROHM BD96801 Power
2142 tristate "Support for STM32 Low-Power Timer"
2144 select MFD_CORE
2145 select REGMAP
2146 select REGMAP_MMIO
2148 Select this option to enable STM32 Low-Power Timer driver
2153 module will be called stm32-lptimer.
2158 select MFD_CORE
2159 select REGMAP
2160 select REGMAP_MMIO
2162 Select this option to enable STM32 timers driver used
2169 select REGMAP_I2C
2170 select REGMAP_IRQ
2171 select MFD_CORE
2183 tristate "Support for STMicroelectronics Multi-Function eXpander (STMFX)"
2186 select MFD_CORE
2187 select REGMAP_I2C
2189 Support for the STMicroelectronics Multi-Function eXpander.
2198 select REGMAP
2199 select REGMAP_SLIMBUS
2200 select REGMAP_IRQ
2201 select MFD_CORE
2209 select MFD_CORE
2210 select REGMAP
2211 select REGMAP_IRQ
2215 select MFD_ATC260X
2216 select REGMAP_I2C
2229 select MFD_CORE
2230 select REGMAP_I2C
2239 power-on options, power-off control and system FAN control on recent
2250 select MFD_CORE
2251 select REGMAP
2260 select MFD_CORE
2261 select REGMAP_I2C
2262 select REGMAP_IRQ
2264 Select this option to get support for the Qualcomm Technologies, Inc.
2282 select MCP
2288 select MCP
2298 select MFD_CORE
2299 select FW_CS_DSP
2300 select REGMAP_IRQ
2304 select REGMAP_I2C
2305 select MFD_CS40L50_CORE
2308 Select this to support the Cirrus Logic CS40L50 Haptic
2312 called "cs40l50-i2c".
2316 select REGMAP_SPI
2317 select MFD_CS40L50_CORE
2320 Select this to support the Cirrus Logic CS40L50 Haptic
2324 called "cs40l50-spi".
2330 select GPIO_GENERIC_PLATFORM
2331 select MFD_CORE
2332 select MFD_SYSCON
2340 select CRC_ITU_T
2342 Select this to get support for the Supervisory Processor
2348 select MFD_CORE
2350 This option enables basic support for the SGI IOC3-based
2360 select MFD_CORE
2361 select REGMAP
2367 select MFD_INTEL_M10_BMC_CORE
2368 select REGMAP_SPI_AVMM
2380 select MFD_INTEL_M10_BMC_CORE
2381 select REGMAP
2392 select MFD_CORE
2393 select REGMAP_I2C
2406 select MFD_CORE
2407 select REGMAP_SPI