Lines Matching full:656
975 * mode, enabling BT.656 mode should take precedence. However,
977 * seems to be required in BT.656 mode. In SYNC mode set it to
1007 /* The polarity of the vertical sync signal output by the BT.656
1028 /* Enable or disable BT.656 mode, including error correction for the
1157 * input format is a non-BT.656 YUV variant.
1233 * need two cycles per pixel in BT.656 mode, and one cycle per pixel in
1277 /* Use PACK8 mode for 1byte per pixel formats. Check for BT.656 mode
1653 /* In BT.656 mode the CCDC doesn't generate an HS/VS interrupt. We thus
1663 /* Emulate a VD1 interrupt for BT.656 mode, as we can't stop the CCDC in
1704 /* In BT.656 mode the synchronization signals are generated by the CCDC
1711 * interrupt handler instead for BT.656.
1810 * starting the stream) in external sync mode, or immediately in BT.656
2017 * 1X16. In BT.656 no such conversion occurs. As we don't know
2018 * at this point whether the source will use SYNC or BT.656 mode
2020 * configured to pack bytes in BT.656, hiding the inaccuracy.