1 // SPDX-License-Identifier: GPL-2.0-or-later
5  *  Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com>
17  * and keep the -i2c.c implementation clean.
27 		.name		= "Unknown",
32 		.name		= "Generic Rev2",
38 		.name		= "Generic Rev3",
42 		.name		= "Hauppauge WinTV-HVR2200",
53 			.name		= "4K EEPROM",
60 			.name		= "TDA18271-1",
67 			.name		= "TDA18271-2",
74 			.name		= "TDA10048-1",
81 			.name		= "TDA10048-2",
88 		.name		= "Hauppauge WinTV-HVR2200",
99 			.name		= "4K EEPROM",
106 			.name		= "TDA18271-1",
113 			.name		= "TDA10048-1",
120 			.name		= "TDA18271-2",
127 			.name		= "TDA10048-2",
134 		.name		= "Hauppauge WinTV-HVR2200",
145 			.name		= "4K EEPROM",
152 			.name		= "TDA18271-1",
159 			.name		= "TDA8290-1",
166 			.name		= "TDA18271-2",
173 			.name		= "TDA8290-2",
180 			.name		= "TDA10048-1",
187 			.name		= "TDA10048-2",
194 		.name		= "Hauppauge WinTV-HVR2200",
205 			.name		= "4K EEPROM",
212 			.name		= "TDA18271-1",
219 			.name		= "TDA8290-1",
226 			.name		= "TDA18271-2",
233 			.name		= "TDA8290-2",
240 			.name		= "TDA10048-1",
247 			.name		= "TDA10048-2",
254 		.name		= "Hauppauge WinTV-HVR2250",
265 			.name		= "4K EEPROM",
272 			.name		= "TDA18271-1",
279 			.name		= "CX24228/S5H1411-1 (TOP)",
286 			.name		= "CX24228/S5H1411-1 (QAM)",
293 			.name		= "TDA18271-2",
300 			.name		= "CX24228/S5H1411-2 (TOP)",
307 			.name		= "CX24228/S5H1411-2 (QAM)",
314 		.name		= "Hauppauge WinTV-HVR2250",
325 			.name		= "4K EEPROM",
332 			.name		= "TDA18271-1",
339 			.name		= "CX24228/S5H1411-1 (TOP)",
346 			.name		= "CX24228/S5H1411-1 (QAM)",
353 			.name		= "TDA18271-2",
360 			.name		= "CX24228/S5H1411-2 (TOP)",
367 			.name		= "CX24228/S5H1411-2 (QAM)",
374 		.name		= "Hauppauge WinTV-HVR2250",
385 			.name		= "4K EEPROM",
392 			.name		= "TDA18271-1",
399 			.name		= "CX24228/S5H1411-1 (TOP)",
406 			.name		= "CX24228/S5H1411-1 (QAM)",
413 			.name		= "TDA18271-2",
420 			.name		= "CX24228/S5H1411-2 (TOP)",
427 			.name		= "CX24228/S5H1411-2 (QAM)",
434 		.name		= "Hauppauge WinTV-HVR2200",
441 			.name		= "4K EEPROM",
448 			.name		= "TDA18271-1",
455 			.name		= "TDA8290-1",
462 			.name		= "TDA18271-2",
469 			.name		= "TDA8290-2",
476 			.name		= "TDA10048-1",
483 			.name		= "TDA10048-2",
490 		.name		= "Hauppauge WinTV-HVR2255(proto)",
501 			.name		= "4K EEPROM",
508 			.name		= "SI2157-1",
515 			.name		= "LGDT3306",
522 			.name		= "SI2157-2",
529 			.name		= "LGDT3306-2",
536 		.name		= "Hauppauge WinTV-HVR2255",
547 			.name		= "4K EEPROM",
554 			.name		= "SI2157-1",
561 			.name		= "LGDT3306-1",
568 			.name		= "SI2157-2",
575 			.name		= "LGDT3306-2",
582 		.name		= "Hauppauge WinTV-HVR2205",
593 			.name		= "4K EEPROM",
600 			.name		= "SI2157-1",
607 			.name		= "SI2168-1",
614 			.name		= "SI2157-2",
621 			.name		= "SI2168-2",
630 /* ------------------------------------------------------------------ */
697 	if (0 == dev->pci->subsystem_vendor &&  in saa7164_card_list()
698 	    0 == dev->pci->subsystem_device) {  in saa7164_card_list()
704 			"%s:         -- tux\n",  in saa7164_card_list()
705 			dev->name, dev->name, dev->name, dev->name, dev->name);  in saa7164_card_list()
712 			dev->name, dev->name, dev->name, dev->name);  in saa7164_card_list()
716 	       dev->name);  in saa7164_card_list()
719 		printk(KERN_ERR "%s:    card=%d -> %s\n",  in saa7164_card_list()
720 		       dev->name, i, saa7164_boards[i].name);  in saa7164_card_list()
723 /* TODO: clean this define up into the -cards.c structs */
728 	switch (dev->board) {  in saa7164_gpio_setup()
742 		GPIO 2: s5h1411 / tda10048-1 demod reset  in saa7164_gpio_setup()
743 		GPIO 3: s5h1411 / tda10048-2 demod reset  in saa7164_gpio_setup()
748 		 * GPIO 2: lgdg3306-1 demod reset  in saa7164_gpio_setup()
749 		 * GPIO 3: lgdt3306-2 demod reset  in saa7164_gpio_setup()
753 		 * GPIO 2: si2168-1 demod reset  in saa7164_gpio_setup()
754 		 * GPIO 3: si2168-2 demod reset  in saa7164_gpio_setup()
778 		/* Development board - Limit circulation */  in hauppauge_eeprom()
779 		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
782 		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
786 		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
790 		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
795 		/* WinTV-HVR2200 (PCIe, Retail, full-height)  in hauppauge_eeprom()
796 		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */  in hauppauge_eeprom()
799 		/* WinTV-HVR2200 (PCIe, Retail, half-height)  in hauppauge_eeprom()
800 		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */  in hauppauge_eeprom()
804 		/* WinTV-HVR2205 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
805 		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */  in hauppauge_eeprom()
809 		/* WinTV-HVR2205 (PCIe, Retail, half-height bracket)  in hauppauge_eeprom()
810 		 * DVB-T/T2/C (SI2157/SI2168) and basic analog, FM */  in hauppauge_eeprom()
814 		/* WinTV-HVR2255 (PCIe, Retail, full-height bracket)  in hauppauge_eeprom()
819 			dev->name, tv.model);  in hauppauge_eeprom()
823 	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,  in hauppauge_eeprom()
829 	static u8 eeprom[256];  in saa7164_card_setup()  local
831 	if (dev->i2c_bus[0].i2c_rc == 0) {  in saa7164_card_setup()
832 		if (saa7164_api_read_eeprom(dev, &eeprom[0],  in saa7164_card_setup()
833 			sizeof(eeprom)) < 0)  in saa7164_card_setup()
837 	switch (dev->board) {  in saa7164_card_setup()
849 		hauppauge_eeprom(dev, &eeprom[0]);  in saa7164_card_setup()
872 	struct saa7164_dev *dev = bus->dev;  in saa7164_i2caddr_to_unitid()
877 		unit = &saa7164_boards[dev->board].unit[i];  in saa7164_i2caddr_to_unitid()
879 		if (unit->type == SAA7164_UNIT_UNDEFINED)  in saa7164_i2caddr_to_unitid()
881 		if ((bus->nr == unit->i2c_bus_nr) &&  in saa7164_i2caddr_to_unitid()
882 			(addr == unit->i2c_bus_addr))  in saa7164_i2caddr_to_unitid()
883 			return unit->id;  in saa7164_i2caddr_to_unitid()
886 	return -1;  in saa7164_i2caddr_to_unitid()
899 	struct saa7164_dev *dev = bus->dev;  in saa7164_i2caddr_to_reglen()
904 		unit = &saa7164_boards[dev->board].unit[i];  in saa7164_i2caddr_to_reglen()
906 		if (unit->type == SAA7164_UNIT_UNDEFINED)  in saa7164_i2caddr_to_reglen()
909 		if ((bus->nr == unit->i2c_bus_nr) &&  in saa7164_i2caddr_to_reglen()
910 			(addr == unit->i2c_bus_addr))  in saa7164_i2caddr_to_reglen()
911 			return unit->i2c_reg_len;  in saa7164_i2caddr_to_reglen()
914 	return -1;  in saa7164_i2caddr_to_reglen()
917  * eeprom related todo's in -api.c.
920 /* Translate a unitid into a x readable device name, for display purposes.  */
932 		unit = &saa7164_boards[dev->board].unit[i];  in saa7164_unitid_name()
934 		if (unit->type == SAA7164_UNIT_UNDEFINED)  in saa7164_unitid_name()
937 		if (unitid == unit->id)  in saa7164_unitid_name()
938 				return unit->name;  in saa7164_unitid_name()