1 // SPDX-License-Identifier: GPL-2.0-only
16  * that none of the code has been re-used, it's a complete
17  * re-implementation
21  * controls with a tiny difference. The control-ids of hard-drive-fan
22  * and cpu-fan is swapped.
34  *   offset		: -19563152
38  *   offset		: -15650652
44  *   offset		: -15650652
48  *   offset		: -19563152
54  *   offset		: -25431900
58  *   offset		: -15650652
61  * Target rubber-banding :
74  *   control	: cpu-fan
75  *   ref	: optical-drive-fan
76  *   offset	: -15650652
80  *   control	: optical-drive-fan
81  *   ref	: hard-drive-fan
82  *   offset	: -32768000
94  *   control        : hard-drive-fan
95  *   sensor         : hard-drive-temp
104  *   control        : hard-drive-fan
105  *   sensor         : hard-drive-temp
116  *   control        : optical-drive-fan
117  *   sensor         : optical-drive-temp
126  *   control        : optical-drive-fan
127  *   sensor         : optical-drive-temp
138  *   control        : hard-drive-fan
139  *   sensor         : gpu-temp
148  *   control        : cpu-fan
149  *   sensor         : gpu-temp
160  *   control        : optical-drive-fan
161  *   sensor         : north-bridge-temp
170  *   control        : hard-drive-fan
171  *   sensor         : north-bridge-temp
181  *   control        : cpu-fan
182  *   sensors        : cpu-temp, cpu-power
187  *   control        : cpufreq-clamp
188  *   sensor         : cpu-temp
282 		{ .offset	= -19563152,
286 		{ .offset	= -15650652,
293 		{ .offset	= -15650652,
297 		{ .offset	= -19563152,
304 		{ .offset	= -25431900,
308 		{ .offset	= -15650652,
325 	  { .offset	= -32768000,
332 	  { .offset	= -32768000,
352 	/* purely informative since we use mach_model-2 as index */
354 	struct wf_sensor	**sensor; /* use sensor_id instead ? */  member
364 		  .sensor	= &sensor_gpu_temp,
370 		  .sensor	= &sensor_gpu_temp,
379 		  .sensor	= &sensor_hard_drive_temp,
385 		  .sensor	= &sensor_hard_drive_temp,
394 		  .sensor	= &sensor_north_bridge_temp,
400 		  .sensor	= &sensor_north_bridge_temp,
409 		  .sensor	= &sensor_optical_drive_temp,
415 		  .sensor	= &sensor_optical_drive_temp,
463 /* correction the value using the output-low-bound correction algo */
470 	correction = &corrections[control_id][pm121_mach_model - 2];  in pm121_correct()
472 	new_min = (average_power * correction->slope) >> 16;  in pm121_correct()
473 	new_min += correction->offset;  in pm121_correct()
483 	if (pm121_connection->control_id == control_id) {  in pm121_connect()
484 		controls[control_id]->ops->get_value(controls[control_id],  in pm121_connect()
486 		new_min = value * pm121_connection->correction.slope;  in pm121_connect()
487 		new_min += pm121_connection->correction.offset;  in pm121_connect()
493 					 controls[control_id]->name,  in pm121_connect()
494 					 controls[pm121_connection->ref_id]->name,  in pm121_connect()
531 	control = controls[param->control_id];  in pm121_create_sys_fans()
540 	pm121_sys_state[loop_id]->ticks = 1;  in pm121_create_sys_fans()
544 	pid_param.gp		= param->gp;  in pm121_create_sys_fans()
548 	pid_param.itarget	= param->itarget;  in pm121_create_sys_fans()
551 		pid_param.min		= control->ops->get_min(control);  in pm121_create_sys_fans()
552 		pid_param.max		= control->ops->get_max(control);  in pm121_create_sys_fans()
562 	wf_pid_init(&pm121_sys_state[loop_id]->pid, &pid_param);  in pm121_create_sys_fans()
575 	       loop_names[loop_id], control ? control->name : "uninitialized value");  in pm121_create_sys_fans()
585 	struct wf_sensor *sensor;  in pm121_sys_fans_tick()  local
587 	s32 temp, new_setpoint;  in pm121_sys_fans_tick()  local
590 	param = &(pm121_sys_all_params[loop_id][pm121_mach_model-2]);  in pm121_sys_fans_tick()
592 	sensor = *(param->sensor);  in pm121_sys_fans_tick()
593 	control = controls[param->control_id];  in pm121_sys_fans_tick()
595 	if (--st->ticks != 0) {  in pm121_sys_fans_tick()
600 	st->ticks = PM121_SYS_INTERVAL;  in pm121_sys_fans_tick()
602 	rc = sensor->ops->get_value(sensor, &temp);  in pm121_sys_fans_tick()
604 		printk(KERN_WARNING "windfarm: %s sensor error %d\n",  in pm121_sys_fans_tick()
605 		       sensor->name, rc);  in pm121_sys_fans_tick()
611 		 loop_names[loop_id], sensor->name,  in pm121_sys_fans_tick()
612 		 FIX32TOPRINT(temp));  in pm121_sys_fans_tick()
614 	new_setpoint = wf_pid_run(&st->pid, temp);  in pm121_sys_fans_tick()
618 				     param->control_id,  in pm121_sys_fans_tick()
619 				     st->pid.param.min);  in pm121_sys_fans_tick()
621 	new_setpoint = pm121_connect(param->control_id, new_setpoint);  in pm121_sys_fans_tick()
623 	if (new_setpoint == st->setpoint)  in pm121_sys_fans_tick()
625 	st->setpoint = new_setpoint;  in pm121_sys_fans_tick()
627 		 control->name, (int)new_setpoint);  in pm121_sys_fans_tick()
630 		rc = control->ops->set_value(control, st->setpoint);  in pm121_sys_fans_tick()
633 			       control->name, rc);  in pm121_sys_fans_tick()
666 		tmax = ((s32)fvt->maxtemp) << 16;  in pm121_create_cpu_fans()
675 	pm121_cpu_state->ticks = 1;  in pm121_create_cpu_fans()
679 	pid_param.history_len = piddata->history_len;  in pm121_create_cpu_fans()
682 		       "CPU control loop (%d)\n", piddata->history_len);  in pm121_create_cpu_fans()
685 	pid_param.gd = piddata->gd;  in pm121_create_cpu_fans()
686 	pid_param.gp = piddata->gp;  in pm121_create_cpu_fans()
687 	pid_param.gr = piddata->gr / pid_param.history_len;  in pm121_create_cpu_fans()
689 	tdelta = ((s32)piddata->target_temp_delta) << 16;  in pm121_create_cpu_fans()
690 	maxpow = ((s32)piddata->max_power) << 16;  in pm121_create_cpu_fans()
691 	powadj = ((s32)piddata->power_adj) << 16;  in pm121_create_cpu_fans()
694 	pid_param.ttarget = tmax - tdelta;  in pm121_create_cpu_fans()
695 	pid_param.pmaxadj = maxpow - powadj;  in pm121_create_cpu_fans()
697 	pid_param.min = fan_cpu->ops->get_min(fan_cpu);  in pm121_create_cpu_fans()
698 	pid_param.max = fan_cpu->ops->get_max(fan_cpu);  in pm121_create_cpu_fans()
700 	wf_cpu_pid_init(&pm121_cpu_state->pid, &pid_param);  in pm121_create_cpu_fans()
721 	s32 new_setpoint, temp, power;  in pm121_cpu_fans_tick()  local
725 	if (--st->ticks != 0) {  in pm121_cpu_fans_tick()
730 	st->ticks = PM121_CPU_INTERVAL;  in pm121_cpu_fans_tick()
734 	rc = sensor_cpu_temp->ops->get_value(sensor_cpu_temp, &temp);  in pm121_cpu_fans_tick()
736 		printk(KERN_WARNING "pm121: CPU temp sensor error %d\n",  in pm121_cpu_fans_tick()
742 	rc = sensor_cpu_power->ops->get_value(sensor_cpu_power, &power);  in pm121_cpu_fans_tick()
744 		printk(KERN_WARNING "pm121: CPU power sensor error %d\n",  in pm121_cpu_fans_tick()
750 	pr_debug("pm121: CPU Fans tick ! CPU temp: %d.%03d°C, power: %d.%03d\n",  in pm121_cpu_fans_tick()
751 		 FIX32TOPRINT(temp), FIX32TOPRINT(power));  in pm121_cpu_fans_tick()
753 	if (temp > st->pid.param.tmax)  in pm121_cpu_fans_tick()
756 	new_setpoint = wf_cpu_pid_run(&st->pid, power, temp);  in pm121_cpu_fans_tick()
761 				     st->pid.param.min);  in pm121_cpu_fans_tick()
766 	if (st->setpoint == new_setpoint)  in pm121_cpu_fans_tick()
768 	st->setpoint = new_setpoint;  in pm121_cpu_fans_tick()
773 		rc = fan_cpu->ops->set_value(fan_cpu, st->setpoint);  in pm121_cpu_fans_tick()
776 			       fan_cpu->name, rc);  in pm121_cpu_fans_tick()
804 	if (pm121_skipping && --pm121_skipping)  in pm121_tick()
809 	for (i = 0; i < pm121_cpu_state->pid.param.history_len; i++)  in pm121_tick()
810 		total_power += pm121_cpu_state->pid.powers[i];  in pm121_tick()
812 	average_power = total_power / pm121_cpu_state->pid.param.history_len;  in pm121_tick()
856 	 * _and_ no other failure is present. Since a sensor error will  in pm121_tick()
872 	if (controls[id] == NULL && !strcmp(ct->name, match)) {  in pm121_register_control()
886 	all = pm121_register_control(ct, "optical-drive-fan", FAN_OD) && all;  in pm121_new_control()
887 	all = pm121_register_control(ct, "hard-drive-fan", FAN_HD) && all;  in pm121_new_control()
888 	all = pm121_register_control(ct, "cpu-fan", FAN_CPU) && all;  in pm121_new_control()
889 	all = pm121_register_control(ct, "cpufreq-clamp", CPUFREQ) && all;  in pm121_new_control()
898 static struct wf_sensor* pm121_register_sensor(struct wf_sensor *sensor,  in pm121_register_sensor()  argument
902 	if (*var == NULL && !strcmp(sensor->name, match)) {  in pm121_register_sensor()
903 		if (wf_get_sensor(sensor) == 0)  in pm121_register_sensor()
904 			*var = sensor;  in pm121_register_sensor()
916 	all = pm121_register_sensor(sr, "cpu-temp",  in pm121_new_sensor()
918 	all = pm121_register_sensor(sr, "cpu-current",  in pm121_new_sensor()
920 	all = pm121_register_sensor(sr, "cpu-voltage",  in pm121_new_sensor()
922 	all = pm121_register_sensor(sr, "cpu-power",  in pm121_new_sensor()
924 	all = pm121_register_sensor(sr, "hard-drive-temp",  in pm121_new_sensor()
926 	all = pm121_register_sensor(sr, "optical-drive-temp",  in pm121_new_sensor()
928 	all = pm121_register_sensor(sr, "incoming-air-temp",  in pm121_new_sensor()
930 	all = pm121_register_sensor(sr, "north-bridge-temp",  in pm121_new_sensor()
932 	all = pm121_register_sensor(sr, "gpu-temp",  in pm121_new_sensor()
947 			 ((struct wf_control *)data)->name);  in pm121_notify()
951 		pr_debug("pm121: new sensor %s detected\n",  in pm121_notify()
952 			 ((struct wf_sensor *)data)->name);  in pm121_notify()
976 		pm121_mach_model = st->model_id;  in pm121_init_pm()
979 	pm121_connection = &pm121_connections[pm121_mach_model - 2];  in pm121_init_pm()
1012 	int rc = -ENODEV;  in pm121_init()