Lines Matching full:if
11 If unsure, say Y.
13 if INPUT_TOUCHSCREEN
19 Say Y here if you have a 88PM860x PMIC and want to enable
22 If unsure, say N.
32 Say Y here if you have a touchscreen interface using the
37 If HWMON is selected, and the driver is told the reference voltage
41 If unsure, say N (but it's safe to say "Y").
50 Say Y here if you have a touchscreen interface using the
54 If unsure, say N (but it's safe to say "Y").
62 Say Y here if you want to support a touchscreen interface using
75 Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
85 Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
87 If unsure, say N (but it's safe to say "Y").
98 Say Y here if you want to use the generic ADC
101 If unsure, say N (but it's safe to say "Y").
110 Say Y here if you have an ARM Apple device with
113 If unsure, say N.
122 Say Y here if you have the Microchip AR1020 or AR1021 touchscreen
125 If unsure, say N.
135 Say Y here if you have Atmel mXT series I2C touchscreen,
138 If unsure, say N.
149 Say Y here if you want support to output data from the T37
157 Say Y here if you have a AUO display with in-cell touchscreen
160 If unsure, say N.
169 Say Y here if you have a bu21013 touchscreen connected to
172 If unsure, say N.
181 Say Y here if you have a Rohm BU21029 touchscreen controller
184 If unsure, say N.
195 Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
197 If unsure, say N.
206 Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
208 If unsure, say N.
217 Say Y here if you have a Cypress CY8CTMA140 capacitive
220 If unsure, say N.
230 Say Y here if you have a cy8ctmg110 capacitive touchscreen on
233 If unsure, say N.
241 Say Y here if you have a touchscreen using controller from
246 If unsure, say N.
255 Say Y here if the touchscreen is connected via I2C bus.
264 Say Y here if the touchscreen is connected via SPI bus.
278 Say Y here if you have a Cypress Gen5 touchscreen.
280 If unsure, say N.
293 If unsure, say N.
305 If unsure, say N.
314 Say Y here if you have a Dynapro serial touchscreen connected to
317 If unsure, say N.
326 Say Y here if you have a Hampshire serial touchscreen connected to
329 If unsure, say N.
377 Say Y here if you have the Fujitsu touchscreen (such as one
381 If unsure, say N.
391 Say Y here if you have the Goodix touchscreen (such as one
396 If unsure, say N.
410 Say Y here if you have a Goodix Berlin IC connected to
413 If unsure, say N.
424 Say Y here if you have a Goodix Berlin IC connected to
427 If unsure, say N.
437 Say Y here if you have a touchscreen using HiDeep.
439 If unsure, say N.
449 Say Y here if you have a touchscreen using Hycon hy46xx
451 If unsure, say N.
460 Say Y here if you have a touchscreen using a Hynitron
463 If unsure, say N.
473 Say Y here if you have a ILI210X based touchscreen
479 If unsure, say N.
488 Say Y here if you have touchscreen with ILITEK touch IC,
491 If unsure, say N.
500 Say Y here if you want to add support for the IPROC touch
503 If unsure, say N.
512 Say Y if you have the Samsung S6SY761 driver
514 If unsure, say N
523 Say Y here if you have the Gunze AHL-51 touchscreen connected to
526 If unsure, say N.
535 Say Y here if you have an Elan eKTF2127 touchscreen
538 If unsure, say N.
547 Say Y here if you have an Elan eKTH I2C touchscreen
550 If unsure, say N.
559 Say Y here if you have an Elo serial touchscreen connected to
562 If unsure, say N.
571 Say Y here if you have an Wacom W8001 penabled serial touchscreen
574 If unsure, say N.
583 Say Y here if you want to use the I2C version of the Wacom
586 If unsure, say N.
595 Say Y here if you have a LPC32XX device and want
605 Say Y here if you have a MAX11801 based touchscreen
608 If unsure, say N.
617 Say Y here if you have the MELFAS MMS114 touchscreen controller
620 If unsure, say N.
629 Say Y here if you have a MELFAS MIP4 Touchscreen device.
631 If unsure, say N.
641 Say Y here if you have an I2C touchscreen using MStar msg2638.
643 If unsure, say N.
652 Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
655 If unsure, say N.
664 Say Y here if you have a Novatek NT11205 touchscreen.
665 If unsure, say N.
674 Say Y here if you have an Imagis IST30xxC touchscreen.
675 If unsure, say N.
684 Say Y here if you have a Freescale i.MX6UL, and want to
687 If unsure, say N.
696 Say Y here if you have an iNexio serial touchscreen connected to
699 If unsure, say N.
708 Say Y here if you have the ICS MicroClock MK712 touchscreen
711 If unsure, say N.
720 Say Y here if you have a HP Jornada 620/660/680/690 and want to
730 Say Y here if you have a HP Jornada 710/720/728 and want
743 If unsure, say N.
752 Say Y here if you have an HTC Shift UMPC also known as HTC X9500
755 If unsure, say N.
764 Say Y here if you have a Penmount serial touchscreen connected to
767 If unsure, say N.
777 Say Y here if you have an EDT "Polytouch" touchscreen based
781 If unsure, say N.
790 Say Y here if you have the official Raspberry Pi 7 inch screen on
793 If unsure, say N.
804 If unsure, say N.
813 Say Y here if you have a Touchright serial touchscreen connected to
816 If unsure, say N.
825 Say Y here if you have a Touchwin serial touchscreen connected to
828 If unsure, say N.
837 Say Y here if you have 4/5/8 wire touchscreen controller
840 If unsure, say N.
849 Say Y here if you have a pixcir i2c touchscreen
852 If unsure, say N.
861 Say Y here if you have a Weida WDT87XX I2C touchscreen
864 If unsure, say N.
883 Say Y here if you have a Wolfson Microelectronics WM97xx
888 If unsure, say N.
925 If unsure, say N.
962 Say Y here if you have a touchscreen connected to the low-resolution
981 Say Y here if you have an Freescale MC13783 PMIC on your
984 If unsure, say N.
991 bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
996 bool "PanJit device support" if EXPERT
1001 bool "3M/Microtouch EX II series device support" if EXPERT
1006 bool "ITM device support" if EXPERT
1011 bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
1016 bool "Gunze AHL61 device support" if EXPERT
1021 bool "DMC TSC-10/25 device support" if EXPERT
1026 bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
1031 bool "IdealTEK URTC1000 device support" if EXPERT
1036 bool "GeneralTouch Touchscreen device support" if EXPERT
1041 bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
1046 bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
1051 bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
1056 bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
1061 bool "Zytronic controller" if EXPERT
1066 bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
1071 bool "NEXIO/iNexio device support" if EXPERT
1076 bool "EasyTouch USB Touch controller device support" if EXPERT
1079 Say Y here if you have an EasyTouch USB Touch controller.
1080 If unsure, say N.
1086 Say Y here if you have a Sahara TouchIT-213 Tablet PC.
1088 If unsure, say N.
1099 Say Y here if you have a touchscreen on a TS-4800 board.
1104 If unsure, say N.
1113 Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
1116 If unsure, say N.
1130 Say Y here if you have a TSC2004 based touchscreen.
1132 If unsure, say N.
1143 Say Y here if you have a TSC2005 based touchscreen.
1145 If unsure, say N.
1154 Say Y here if you have a TSC2007 based touchscreen.
1156 If unsure, say N.
1175 Say Y here if you have a Motorola EZX telephone and
1186 Say Y here if you have Raydium series I2C touchscreen,
1189 If unsure, say N.
1198 Say Y here if you have the Silead touchscreen connected to
1201 If unsure, say N.
1214 If unsure, say N.
1223 Say Y here if you want to support the Sitronix ST1232
1226 If unsure, say N.
1236 Say Y here if you want support for STMicroelectronics
1247 Say Y here if you want support for STMicroelectronics
1271 Say Y here if you want support for the Samsung SUR40 touchscreen
1282 Say Y here if you have the Ntrig/Microsoft SPI touchscreen
1285 If unsure, say N.
1294 Say Y here if you have a Semtech SX8654 touchscreen controller.
1296 If unsure, say N
1305 Say Y here if you have a TPS6507x based touchscreen
1308 If unsure, say N.
1317 Say Y here if you have a touchscreen using Zeitec ZET6223
1319 If unsure, say N.
1329 Say Y here if you have a touchscreen using the zforce
1332 If unsure, say N.
1342 Say Y here if you have a Colibri VF50 and plan to use
1345 If unsure, say N.
1354 Say Y here if you have a touchscreen using ROHM BU21023/24.
1356 If unsure, say N.
1385 Say Y here if you have a touchscreen using Zinitix bt541,
1388 If unsure, say N.
1400 If unsure, say N.