Lines Matching +full:s +full:- +full:mode

1 /* SPDX-License-Identifier: GPL-2.0 */
7 #include <linux/hid-over-i2c.h>
53  * change to low power LTR mode.
72  * struct quicki2c_subip_acpi_parameter - QuickI2C ACPI DSD parameters
75  * @addressing_mode: I2C device slave address mode, 7bit or 10bit
88  * struct quicki2c_subip_acpi_config - QuickI2C ACPI DSD parameters
89  * @SMHX: Standard Mode (100 kbit/s) Serial Clock Line HIGH Period
90  * @SMLX: Standard Mode (100 kbit/s) Serial Clock Line LOW Period
91  * @SMTD: Standard Mode (100 kbit/s) Serial Data Line Transmit Hold Period
92  * @SMRD: Standard Mode (100 kbit/s) Serial Data Receive Hold Period
93  * @FMHX: Fast Mode (400 kbit/s) Serial Clock Line HIGH Period
94  * @FMLX: Fast Mode (400 kbit/s) Serial Clock Line LOW Period
95  * @FMTD: Fast Mode (400 kbit/s) Serial Data Line Transmit Hold Period
96  * @FMRD: Fast Mode (400 kbit/s) Serial Data Line Receive Hold Period
98  *        in Standard Mode, Fast Mode and Fast Mode Plus
99  * @FPHX: Fast Mode Plus (1Mbit/sec) Serial Clock Line HIGH Period
100  * @FPLX: Fast Mode Plus (1Mbit/sec) Serial Clock Line LOW Period
101  * @FPTD: Fast Mode Plus (1Mbit/sec) Serial Data Line Transmit HOLD Period
102  * @FPRD: Fast Mode Plus (1Mbit/sec) Serial Data Line Receive HOLD Period
103  * @HMHX: High Speed Mode Plus (3.4Mbits/sec) Serial Clock Line HIGH Period
104  * @HMLX: High Speed Mode Plus (3.4Mbits/sec) Serial Clock Line LOW Period
105  * @HMTD: High Speed Mode Plus (3.4Mbits/sec) Serial Data Line Transmit HOLD Period
106  * @HMRD: High Speed Mode Plus (3.4Mbits/sec) Serial Data Line Receive HOLD Period
107  * @HMSL: Maximum length (in ic_clk_cycles) of suppressed spikes in High Speed Mode
147  * struct quicki2c_ddata - Driver specific data for quicki2c device
163  * struct quicki2c_device -  THC QuickI2C device struct
177  * @i2c_speed_mode: 0 - standard mode, 1 - fast mode, 2 - fast mode plus