Lines Matching +full:spread +full:- +full:spectrum +full:- +full:center
2 * Copyright 2006-2007 Advanced Micro Devices, Inc.
214 UCHAR uaFirmWareSignature[4]; /*Signature to distinguish between Atombios and non-atombios,
397 …ONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_…
403 …ONG ulPointerReturnFlag:1; // BYTE_3[7]=1 - Return the pointer to the right Data Block; BYTE_…
410 …ULONG ulClock; //When returen, it's the re-calculated clock based on given Fb_div Post_Di…
504 …UCHAR ucInputFlag; //Input Flags. ucInputFlag[0] - Strobe(1)/Performance(0)…
536 #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode
544 …bDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS)
549 … //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode
815 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disab…
868 // Following function ENABLE sub-function will be used by driver when TMDS/HDMI/LVDS is used, disab…
921 …UCHAR ucHPD_ID; // HPD ID (1-6). =0 means to skip HDP programming. New comparing to prev…
1174 UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
1178 UCHAR ucPRE_EMPHASIS:3; //Bit[5:3] Pre-emphasis Level
1276 UCHAR ucLaneNum; // indicate lane number 1-8
1626 …// bit[4]=0:use XTALIN as the source of reference divider,=1 use the pre-defined clock as the sour…
1654 // =1: other external clock source, which is pre-defined
1702 …// =1: other external clock source, which is pre-defined …
1783 …UCHAR ucRefDiv; // if it is none-zero, it is used to be calculated the other …
1784 …UCHAR ucPostDiv; // if it is none-zero, it is used to be calculated the other …
1830 //Read operaion successeful when the paramter space is non-zero, otherwise read operation failed
1905 …UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int.…
1915 …UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int.…
1927 …UCHAR ucSpreadSpectrumType; // Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =0 Int…
1938 UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
1939 // Bit[1]: 1-Ext. 0-Int.
1963 UCHAR ucSpreadSpectrumType; // Bit[0]: 0-Down Spread,1-Center Spread.
1964 // Bit[1]: 1-Ext. 0-Int.
2149 // bit1=0: non-coherent mode
2380 …SIC_ProfilingInfo; // New table name from R600, used to be called "ASIC_VDDCI_Info" for pre-R600
2567 …USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMin…
2604 …USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMin…
2642 …USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMin…
2681 …USHORT usMinPixelClockPLL_Output; //In 10Khz unit - lower 16bit of ulMin…
2685 … In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2724 … In DP Mode Uniphy Input clock from internal PPLL, otherwise Input clock from external Spread clock
2781 … For AMD IGP,it's 0 if no SidePort memory installed or it's the boot-up SidePort memory clock
2857 … // Input to calculate minimum HT link change time required by NB P-State. Unit is 0.01us.
2862 ulBootUpEngineClock: Boot-up Engine Clock in 10Khz;
2863 ulBootUpUMAClock: Boot-up UMA Clock in 10Khz; it must be 0x0 when UMA is not present
2864 ulBootUpSidePortClock: Boot-up SidePort Clock in 10Khz; it must be 0x0 when SidePort Memory is not …
2867 Bit[0]=1: PowerExpress mode =0 Non-PowerExpress mode;
2868 … or user customized mode. In this case, driver will just stick to this boot-up mode. No other Pow…
2886 …ord is a bit vector indicates what display devices are requested during boot-up. Refer to ATOM_DEV…
2888 ulOtherDisplayMisc: [15:8]- Bootup LCD Expansion selection; 0-center, 1-full panel size expansion;
2889 …[7:0] - BootupTV standard selection; This is a bit vector to indicate what TV standards are suppor…
2892 …[3:0] - Bit vector to indicate PCIE lane config of the DDI slot/connector on chassis (bit 0=1 lan…
2893 …[7:4] - Bit vector to indicate PCIE lane config of the same DDI slot/connector on docking station…
2896 …one DDI connector is only populated in docking with PCIE lane 8-11, but there is no paired connect…
2898 [15:8] - Lane configuration attribute;
2899 [23:16]- Connector type, possible value:
2905 [31:24]- Reserved
2913 ulDockingPinCFGInfo: [15:0]-Bus/Device/Function # to CFG to read this Docking Pin; [31:16]-reg offs…
2927 usBootUpNBVoltage:Boot-up voltage regulator dependent PWM value.
2955 // ATOM_INTEGRATED_SYSTEM_INFO::ulCPUCapInfo - CPU type definition
3153 // Bits0 = 0 - no CRT1 support= 1- CRT1 is supported
3154 // Bit 1 = 0 - no LCD1 support= 1- LCD1 is supported
3155 // Bit 2 = 0 - no TV1 support= 1- TV1 is supported
3156 // Bit 3 = 0 - no DFP1 support= 1- DFP1 is supported
3157 // Bit 4 = 0 - no CRT2 support= 1- CRT2 is supported
3158 // Bit 5 = 0 - no LCD2 support= 1- LCD2 is supported
3159 // Bit 6 = 0 - no DFP6 support= 1- DFP6 is supported
3160 // Bit 7 = 0 - no DFP2 support= 1- DFP2 is supported
3161 // Bit 8 = 0 - no CV support= 1- CV is supported
3162 // Bit 9 = 0 - no DFP3 support= 1- DFP3 is supported
3163 // Bit 10 = 0 - no DFP4 support= 1- DFP4 is supported
3164 // Bit 11 = 0 - no DFP5 support= 1- DFP5 is supported
3172 // [7:0] - I2C LINE Associate ID
3173 // = 0 - no I2C
3174 // [7] - HW_Cap = 1, [6:0]=HW assisted I2C ID(HW line selection)
3176 // [6-4] - HW_ENGINE_ID = 1, HW engine for NON multimedia use
3178 // = 3-7 Reserved for future I2C engines
3179 // [3-0] - I2C_LINE_MUX = A Mux number when it's HW assisted I2C or GPIO ID when it's SW I2C
3284 // usModeMiscInfo-
3296 //usRefreshRate-
3478 // 0 0 0 - Color bit depth is undefined
3479 // 0 0 1 - 6 Bits per Primary Color
3480 // 0 1 0 - 8 Bits per Primary Color
3481 // 0 1 1 - 10 Bits per Primary Color
3482 // 1 0 0 - 12 Bits per Primary Color
3483 // 1 0 1 - 14 Bits per Primary Color
3484 // 1 1 0 - 16 Bits per Primary Color
3485 // 1 1 1 - Reserved
3523 // Bit7-3: Reserved
3561 // 0 0 0 - Color bit depth is undefined
3562 // 0 0 1 - 6 Bits per Primary Color
3563 // 0 1 0 - 8 Bits per Primary Color
3564 // 0 1 1 - 10 Bits per Primary Color
3565 // 1 0 0 - 12 Bits per Primary Color
3566 // 1 0 1 - 14 Bits per Primary Color
3567 // 1 1 0 - 16 Bits per Primary Color
3568 // 1 1 1 - Reserved
3585 #define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip
3586 #define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip with…
3636 /****************************Spread Spectrum Info Table Definitions **********************/
3643 …UCHAR ucSpreadSpectrumType; //Bit1=0 Down Spread,=1 Center Spread. Bit1=1 Ext. =…
3729 …UCHAR ucMaxDownSpread; //Bit0 = 0: No Down spread; Bit0 = 1: 0.5% (Subject to change acc…
3741 // To Bios: ATOMBIOS_VRAM_USAGE_START_ADDR+ATOM_x_ADDR->MM_INDEX
3754 …(ATOM_EDID_RAW_DATASIZE + ATOM_DTD_MODE_SUPPORT_TBL_SIZE + ATOM_STD_MODE_SUPPORT_TBL_SIZE - 20)
3812 #define ATOM_VRAM_RESERVE_SIZE ((((ATOM_STACK_STORAGE_END - ATOM_HWICON1_SURFACE_ADDR)>>10)…
3835 FBAccessAreaOffset= ulStartAddrUsedByFirmware - usFBUsedbyDrvInKB;
3839 FBAccessAreaOffset= FB_Size - usFBUsedbyDrvInKB;
3841 FBAccessAreaOffset= Aper_Size - usFBUsedbyDrvInKB
3885 //ucGPIO_ID pre-define id for multiple usage
3967 …UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC t…
3984 …UCHAR ucNumOfWbGpioBlocks; //For Component video D-Connector support. If zere, NTSC t…
4288 UCHAR ucGPIO_PinState; // Pin state showing how to set-up the pin
4341 …USHORT usReserved:14; // Bit1-15 may be defined for other capability in fu…
4347 …USHORT usReserved:14; // Bit1-15 may be defined for other capability in fu…
4480 …UCHAR ucBaseVID; // if there is no lookup table, VID= BaseVID + ( Vol - BaseLevle ) /Vo…
4573 #define VOLTAGE_OBJ_GPIO_LUT 0 //VOLTAGE and GPIO Lookup table ->ATOM_GPIO_V…
4574 …I2C_INIT_SEQ 3 //VOLTAGE REGULATOR INIT sequece through I2C -> ATOM_I2C_VOLTAGE_OB…
4575 #define VOLTAGE_OBJ_PHASE_LUT 4 //Set Vregulator Phase lookup table ->ATOM_GP…
4576 #define VOLTAGE_OBJ_SVID2 7 //Indicate voltage control by SVID2 ->ATOM_SV…
4578 …OST_LEAKAGE_LUT 0x10 //Powerboost Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE…
4579 …AKAGE_LUT 0x11 //High voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE…
4580 …AKAGE_LUT 0x12 //High1 voltage state Voltage and LeakageId lookup table->ATOM_LEAKAGE_VOLTAGE…
4864 … Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine…
4889 …When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways …
4890 …1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determin…
4892 … Changing BL using VBIOS function is functional in both driver and non-driver present environment;
4895 …2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only ind…
4898 …Changing BL using VBIOS function could be functional in both driver and non-driver present environ…
4909 Bit[1]=0: DDR-DLL shut-down feature disabled.
4910 1: DDR-DLL shut-down feature enabled.
4911 Bit[2]=0: DDR-PLL Power down feature disabled.
4912 … 1: DDR-PLL Power down feature enabled.
4931 ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconne…
4932 ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
4935 usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
4936 …ClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Cent…
4937 usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit…
4938 usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit …
4939 usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, …
4940 usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS de…
4941 usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, u…
4942 usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS def…
5079 … Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine…
5113 …When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways …
5114 …1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determin…
5116 … Changing BL using VBIOS function is functional in both driver and non-driver present environment;
5119 …2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only ind…
5122 …Changing BL using VBIOS function could be functional in both driver and non-driver present environ…
5133 Bit[1]=0: DDR-DLL shut-down feature disabled.
5134 1: DDR-DLL shut-down feature enabled.
5135 Bit[2]=0: DDR-PLL Power down feature disabled.
5136 … 1: DDR-PLL Power down feature enabled.
5157 ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconne…
5158 ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
5161 usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
5162 …CIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for …
5163 usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit…
5164 usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit …
5165 usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, …
5166 usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS de…
5167 usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, u…
5168 usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS def…
5179 …default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5182 …fault which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5186 …t delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5190 …fault which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5280 … Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine…
5314 …When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways …
5315 …1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determin…
5317 … Changing BL using VBIOS function is functional in both driver and non-driver present environment;
5320 …2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only ind…
5323 …Changing BL using VBIOS function could be functional in both driver and non-driver present environ…
5333 Bit[1]=0: DDR-DLL shut-down feature disabled.
5334 1: DDR-DLL shut-down feature enabled.
5335 Bit[2]=0: DDR-PLL Power down feature disabled.
5336 1: DDR-PLL Power down feature enabled.
5357 … NCLK speed while memory runs in self-refresh state, used to calculate self-re…
5361 usPCIEClkSSPercentage: PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
5362 …CIEClkSSType: PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for …
5363 usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit…
5364 usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit …
5365 usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, …
5366 usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS de…
5367 usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, u…
5368 usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS def…
5385 …default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5389 …fault which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON.
5393 …t delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5397 …fault which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON
5416 ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB P-…
5417 ulNbpStateNClkFreq[4]: NB P-State NClk frequency in different NB P-State
5418 usNBPStateVoltage[4]: NB P-State (P0/P1 & P2/P3) voltage; NBP3 refers to lowes voltage
5419 usBootUpNBVoltage: NB P-State voltage during boot up before driver loaded
5476 UCHAR ucSpreadSpectrumMode; //Bit1=0 Down Spread,=1 Center Spread.
5502 …UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS …
5533 …UCHAR ucSpreadSpectrumMode; //Bit0=0 Down Spread,=1 Center Spread, bit1=0: internal SS …
5981 …char*>(&(static_cast<ATOM_MASTER_LIST_OF_##MasterOrData##_TABLES*>(0))->FieldName)-static_cast<cha…
5983 …ADER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableFormatRevisio…
5984 …DER_OFFSET) (((static_cast<ATOM_COMMON_TABLE_HEADER*>(TABLE_HEADER_OFFSET))->ucTableContentRevisi…
5988 …SION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableFormatRevisio…
5989 …ION(TABLE_HEADER_OFFSET) ((((ATOM_COMMON_TABLE_HEADER*)TABLE_HEADER_OFFSET)->ucTableContentRevisi…
6369 #define UCODE_SIGNATURE 0x4375434d // 'MCuC' - MC uCode
6407 …fault MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
6408 …fault MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
6425 … ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for…
6434 …fault MVDDQ setting for this memory block, ID linking to MVDDQ info table to find real set-up data;
6435 …fault MVDDC setting for this memory block, ID linking to MVDDC info table to find real set-up data;
6557 … ucMemoryType; // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4;[3:0] - must not be used for…
6582 UCHAR ucVREFI; // board dependnt parameter: EXT or INT +160mv to -140mv
6603 … // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6605 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
6608 …HAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlengt…
6613 … // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6645 … // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6647 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
6650 …HAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlengt…
6655 … // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6664 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6676 … // [7:4]=0x1:DDR1;=0x2:DDR2;=0x3:DDR3;=0x4:DDR4; 0x5:DDR5 [3:0] - Must be 0x0 for now;
6678 UCHAR ucChannelWidth; // 0 - 32 bits; 1 - 64 bits
6681 …HAR ucMisc; // bit0: 0 - single rank; 1 - dual rank; bit2: 0 - burstlengt…
6686 … // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6695 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6714 … // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2.
6716 …Size; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros
6725 UCHAR ucCDR_Bandwidth; // [0:3]=Read CDR bandwidth, [4:7] - Write CDR Bandwidth
6941 ULONG Reserved_1; // dd 0 ; reserved - always set to 0
6942 USHORT Reserved_2; // dw 0 ; reserved - always set to 0
7299 …et; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Lin…
7300 …USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mo…
7301 …USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mo…
7308 …et; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Lin…
7309 …USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mo…
7310 …USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mo…
7450 // [7:4] - connector type
7451 // = 1 - VGA connector
7452 // = 2 - DVI-I
7453 // = 3 - DVI-D
7454 // = 4 - DVI-A
7455 // = 5 - SVIDEO
7456 // = 6 - COMPOSITE
7457 // = 7 - LVDS
7458 // = 8 - DIGITAL LINK
7459 // = 9 - SCART
7460 // = 0xA - HDMI_type A
7461 // = 0xB - HDMI_type B
7462 // = 0xE - Special case1 (DVI+DIN)
7464 // [3:0] - DAC Associated
7465 // = 0 - no DAC
7466 // = 1 - DACA
7467 // = 2 - DACB
7468 // = 3 - External DAC
7533 UCHAR ucPLL_ChargePump; // PLL charge-pump gain control
7643 …SCINFO_FRAME_MODULATION_MASK 0x00300000L //0-FM Disable, 1-2 level FM, 2-4 level FM, 3-…
7653 …ETTINGS_GROUP_MASK 0x70000000L //1-Optimal Battery Life Group, 2-High Battery, 3-Balanced, 4-Hi…
7663 …O2_VIDEO_PLAYBACK_CAPABLE 0x00000040L //If this bit is set in multi-pp mode, then driver …