85 	 * fully operational, but have the danger of duplicate addresses  in btintel_check_bdaddr()
597 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
609 			/* If image type is Operational firmware (0x03), then  in btintel_parse_version_tlv()
1142 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_firmware()
1143 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_firmware()
1147 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_firmware()
1181 	 * mode or is running operational firmware. The value 0x01 identifies  in btintel_download_fw_tlv()
1182 	 * the bootloader and the value 0x03 identifies the operational  in btintel_download_fw_tlv()
1186 	 * to bootloader when operational so the new firmware can be loaded.  in btintel_download_fw_tlv()
1908 	 * is done by the operational firmware sending bootup notification.  in btintel_boot()
1910 	 * Booting into operational firmware should not take longer than  in btintel_boot()
1980 	 * mode or is running operational firmware. The value 0x06 identifies  in btintel_download_fw()
1981 	 * the bootloader and the value 0x23 identifies the operational  in btintel_download_fw()
1984 	 * When the operational firmware is already present, then only  in btintel_download_fw()
2027 	 * also be no valid address for the operational firmware.  in btintel_download_fw()
2111 	/* Before switching the device into operational mode and with that  in btintel_download_fw()
2154 	/* controller is already having an operational firmware */  in btintel_bootloader_setup()
2170 		/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup()
2276 	 * mode or is running operational firmware. The value 0x03 identifies  in btintel_prepare_fw_download_tlv()
2277 	 * the bootloader and the value 0x23 identifies the operational  in btintel_prepare_fw_download_tlv()
2280 	 * When the operational firmware is already present, then only  in btintel_prepare_fw_download_tlv()
2363 	/* Before switching the device into operational mode and with that  in btintel_prepare_fw_download_tlv()
3163 	/* check if controller is already having an operational firmware */  in btintel_bootloader_setup_tlv()
3198 	/* Once the device is running in operational mode, it needs to  in btintel_bootloader_setup_tlv()
3523 	 * to bootloader mode and are not populated in operational mode  in btintel_setup_combined()
3553 		 * the operational firmware supports both old and TLV based  in btintel_setup_combined()
3730 				/* When switching to the operational firmware  in btintel_recv_event()