Lines Matching full:connected
67 Say Y here if you have an HD44780 or KS-0074 LCD connected to your
81 This is the index of the parallel port the panel is connected to. One
83 and LCD are connected to two separate ports, you have to start two
114 This enables and configures a keypad connected to the parallel port.
131 This enables and configures an LCD connected to the parallel port.
227 int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "
232 signal has been connected. It can be :
234 0 : no connection (eg: connected to ground)
235 1..17 : directly connected to any of these pins on the DB25 plug
236 -1..-17 : connected to the same pin through an inverter (eg: transistor).
242 int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "
247 signal has been connected. It can be :
249 0 : no connection (eg: connected to ground)
250 1..17 : directly connected to any of these pins on the DB25 plug
251 -1..-17 : connected to the same pin through an inverter (eg: transistor).
257 int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "
262 signal has been connected. It can be :
264 0 : no connection (eg: connected to ground)
265 1..17 : directly connected to any of these pins on the DB25 plug
266 -1..-17 : connected to the same pin through an inverter (eg: transistor).
272 int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "
277 LCD 'SCL' signal has been connected. It can be :
279 0 : no connection (eg: connected to ground)
280 1..17 : directly connected to any of these pins on the DB25 plug
281 -1..-17 : connected to the same pin through an inverter (eg: transistor).
287 int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "
292 LCD 'SDA' signal has been connected. It can be :
294 0 : no connection (eg: connected to ground)
295 1..17 : directly connected to any of these pins on the DB25 plug
296 -1..-17 : connected to the same pin through an inverter (eg: transistor).
302 int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "
307 has been connected. It can be :
309 0 : no connection (eg: connected to ground)
310 1..17 : directly connected to any of these pins on the DB25 plug
311 -1..-17 : connected to the same pin through an inverter (eg: transistor).
389 hex "Parallel port where the LCD is connected"
393 The address of the parallel port where the LCD is connected.
523 of GPIO pins connected to the individual segments.