Lines Matching full:get
21 HSMP_GET_SOCKET_POWER_LIMIT, /* 06h Get current socket power limit */
22 HSMP_GET_SOCKET_POWER_LIMIT_MAX,/* 07h Get maximum socket power value */
25 HSMP_GET_BOOST_LIMIT, /* 0Ah Get current frequency limit */
26 HSMP_GET_PROC_HOT, /* 0Bh Get PROCHOT status */
30 HSMP_GET_FCLK_MCLK, /* 0Fh Get FCLK and MEMCLK for current socket */
31 HSMP_GET_CCLK_THROTTLE_LIMIT, /* 10h Get CCLK frequency limit in socket */
32 HSMP_GET_C0_PERCENT, /* 11h Get average C0 residency in socket */
34 HSMP_GET_NBIO_DPM_LEVEL, /* 13h Get LCLK DPM level min and max for a given NBIO */
35 HSMP_GET_DDR_BANDWIDTH, /* 14h Get theoretical maximum and current DDR Bandwidth */
36 HSMP_GET_TEMP_MONITOR, /* 15h Get socket temperature */
37 HSMP_GET_DIMM_TEMP_RANGE, /* 16h Get per-DIMM temperature range and refresh rate */
38 HSMP_GET_DIMM_POWER, /* 17h Get per-DIMM power consumption */
39 HSMP_GET_DIMM_THERMAL, /* 18h Get per-DIMM thermal sensors */
40 HSMP_GET_SOCKET_FREQ_LIMIT, /* 19h Get current active frequency per socket */
41 HSMP_GET_CCLK_CORE_LIMIT, /* 1Ah Get CCLK frequency limit per core */
42 HSMP_GET_RAILS_SVI, /* 1Bh Get SVI-based Telemetry for all rails */
43 HSMP_GET_SOCKET_FMAX_FMIN, /* 1Ch Get Fmax and Fmin per socket */
44 HSMP_GET_IOLINK_BANDWITH, /* 1Dh Get current bandwidth on IO Link */
45 HSMP_GET_XGMI_BANDWITH, /* 1Eh Get current bandwidth on xGMI Link */
50 HSMP_GET_METRIC_TABLE_VER, /* 23h Get metrics table version */
51 HSMP_GET_METRIC_TABLE, /* 24h Get metrics table */
52 HSMP_GET_METRIC_TABLE_DRAM_ADDR,/* 25h Get metrics table dram address */
54 HSMP_CPU_RAIL_ISO_FREQ_POLICY, /* 27h Get/Set Cpu Iso frequency policy */
56 HSMP_PC6_ENABLE, /* 29h Get/Set PC6 enable/disable status */
57 HSMP_CC6_ENABLE, /* 2Ah Get/Set CC6 enable/disable status */
58 HSMP_GET_RAPL_UNITS = 0x30, /* 30h Get scaling factor for energy */
59 HSMP_GET_RAPL_CORE_COUNTER, /* 31h Get core energy counter value */
60 HSMP_GET_RAPL_PACKAGE_COUNTER, /* 32h Get package energy counter value */
61 HSMP_DIMM_SB_RD, /* 33h Get DIMM sideband data */
62 HSMP_READ_CCD_POWER, /* 34h Get average CCD power */
63 HSMP_READ_TDELTA, /* 35h Get thermal behaviour */
64 HSMP_GET_SVI3_VR_CTRL_TEMP, /* 36h Get SVI3 VR controller rail temp */
65 HSMP_GET_ENABLED_HSMP_CMDS, /* 37h Get supported HSMP commands */
66 HSMP_SET_GET_FLOOR_LIMIT, /* 38h Get/Set core floor frequency limit */
68 HSMP_SDPS_LIMIT, /* 3Ah Get/Set SDPS limit */
69 HSMP_PQOS_TRAFFIC_PRIORITY, /* 3Bh Get/Set traffic priority */
70 HSMP_PQOS_FLOATING_BW, /* 3Ch Get/Set max floating bandwidth */
186 * input: args[0] = set/get XGMI Link width[31] (0 = set, 1 = get) +
189 * On SET, max must be >= min. On GET, [15:0] are reserved.
197 * input: args[0] = set APB_DISABLE / get APB state[31]
198 * (0 = set & lock DF P-state, 1 = get) +
200 * DF P-state[7:0] (0..2; reserved on GET)
333 * input: args[0] = set/get policy[31] (0 = set, 1 = get) +
347 * input: args[0] = set/get DF P-state range[31] (0 = set, 1 = get) +
385 * input: args[0] = set/get policy[31] +
393 * input: args[0] = set/get policy[31] + enable/disable DFC[0]
400 * input: args[0] = set/get PC6 control[31] (0 = set, 1 = get) +
403 * reserved on GET)
413 * input: args[0] = set/get CC6 control[31] (0 = set, 1 = get) +
416 * reserved on GET)
492 * 10 = get per-core floor,
493 * 11 = get per-core effective floor.
494 * Floor frequency field is reserved on GET (bit[31] = 1).
511 * input: args[0] = set/get SDPS limit[31] (0 = set, 1 = get) +