1 // SPDX-License-Identifier: GPL-2.0
35 #include <linux/dma-map-ops.h>
39 #include <media/drv-intf/renesas-ceu.h>
49 #define DRVCRB				0xA405018C
55 		.offset = 0,
57 		.mask_flags = MTD_WRITEABLE,	/* Read-only */
73 	[0] = {
75 		.start		= 0x00000000,
76 		.end		= 0x03ffffff,
82 	.name		= "physmap-flash",
91 	[0] = {
93 		.start		= 0x10000000,
94 		.end		= 0x1001ffff,
100 	.name		= "onenand-flash",
106 	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->4, KEYIN0->4 */
111 		KEY_1, KEY_2, KEY_3, 0, KEY_UP,
112 		KEY_4, KEY_5, KEY_6, 0, KEY_LEFT,
115 		0, 0, 0, 0, 0
120 	[0] = {
122 		.start  = 0x044b0000,
123 		.end    = 0x044b000f,
127 		.start  = evt2irq(0xbe0),
134 	.id             = 0, /* "keysc0" clock */
147 		.left_margin = 0,
150 		.upper_margin = 0,
159 	.ch[0] = {
174 			.ldmt2r = 0x07010904,
175 			.ldmt3r = 0x14012914,
183 	[0] = {
185 		.start	= 0xfe940000, /* P4-only space */
186 		.end	= 0xfe942fff,
190 		.start	= evt2irq(0xf40),
211 	I2C_BOARD_INFO("lv5207lp", 0x75),
220 	[0] = {
221 		.start	= 0x04d80000,
222 		.end	= 0x04d80123,
226 		.start	= evt2irq(0xa20),
227 		.end	= evt2irq(0xa20),
234 	.id		= 0,
237 		.coherent_dma_mask	= 0xffffffff,
247 		{ /* [0] = rj54n1cb0c */
248 			.flags		= 0,
250 			.bus_shift	= 0,
252 			.i2c_address	= 0x50,
258 	[0] = {
260 		.start	= 0xfe910000,
261 		.end	= 0xfe91009f,
265 		.start  = evt2irq(0x880),
266 		.end	= evt2irq(0x880),
272 	.name		= "renesas-ceu",
273 	.id             = 0, /* "ceu0" clock */
287 	I2C_BOARD_INFO("rj54n1cb0c", 0x50),
292 	.dev_id		= "1-0050",
304 	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
305 	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
309 	[0] = {
311 		.start  = 0x04ce0000,
312 		.end    = 0x04ce00ff,
316 		.start  = evt2irq(0xe80),
345 #define BSC_CS0BCR 0xfec10004
346 #define BSC_CS0WCR 0xfec10024
347 #define BSC_CS4BCR 0xfec10010
348 #define BSC_CS4WCR 0xfec10030
349 #define PORT_MSELCRB 0xa4050182
359 	a = i2c_get_adapter(0);  in kfr2r09_usb0_gadget_i2c_setup()
361 		return -ENODEV;  in kfr2r09_usb0_gadget_i2c_setup()
363 	/* set bit 1 (the second bit) of chip at 0x09, register 0x13 */  in kfr2r09_usb0_gadget_i2c_setup()
364 	buf[0] = 0x13;  in kfr2r09_usb0_gadget_i2c_setup()
365 	msg.addr = 0x09;  in kfr2r09_usb0_gadget_i2c_setup()
368 	msg.flags = 0;  in kfr2r09_usb0_gadget_i2c_setup()
371 		return -ENODEV;  in kfr2r09_usb0_gadget_i2c_setup()
373 	buf[0] = 0;  in kfr2r09_usb0_gadget_i2c_setup()
374 	msg.addr = 0x09;  in kfr2r09_usb0_gadget_i2c_setup()
380 		return -ENODEV;  in kfr2r09_usb0_gadget_i2c_setup()
382 	buf[1] = buf[0] | (1 << 1);  in kfr2r09_usb0_gadget_i2c_setup()
383 	buf[0] = 0x13;  in kfr2r09_usb0_gadget_i2c_setup()
384 	msg.addr = 0x09;  in kfr2r09_usb0_gadget_i2c_setup()
387 	msg.flags = 0;  in kfr2r09_usb0_gadget_i2c_setup()
390 		return -ENODEV;  in kfr2r09_usb0_gadget_i2c_setup()
392 	return 0;  in kfr2r09_usb0_gadget_i2c_setup()
402 	a = i2c_get_adapter(0);  in kfr2r09_serial_i2c_setup()
404 		return -ENODEV;  in kfr2r09_serial_i2c_setup()
406 	/* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */  in kfr2r09_serial_i2c_setup()
407 	buf[0] = 0x13;  in kfr2r09_serial_i2c_setup()
408 	msg.addr = 0x09;  in kfr2r09_serial_i2c_setup()
411 	msg.flags = 0;  in kfr2r09_serial_i2c_setup()
414 		return -ENODEV;  in kfr2r09_serial_i2c_setup()
416 	buf[0] = 0;  in kfr2r09_serial_i2c_setup()
417 	msg.addr = 0x09;  in kfr2r09_serial_i2c_setup()
423 		return -ENODEV;  in kfr2r09_serial_i2c_setup()
425 	buf[1] = buf[0] | (1 << 6);  in kfr2r09_serial_i2c_setup()
426 	buf[0] = 0x13;  in kfr2r09_serial_i2c_setup()
427 	msg.addr = 0x09;  in kfr2r09_serial_i2c_setup()
430 	msg.flags = 0;  in kfr2r09_serial_i2c_setup()
433 		return -ENODEV;  in kfr2r09_serial_i2c_setup()
435 	return 0;  in kfr2r09_serial_i2c_setup()
440 	return -ENODEV;  in kfr2r09_usb0_gadget_i2c_setup()
445 	return -ENODEV;  in kfr2r09_serial_i2c_setup()
457 		return -ENODEV; /* no cable plugged in */  in kfr2r09_usb0_gadget_setup()
459 	if (kfr2r09_usb0_gadget_i2c_setup() != 0)  in kfr2r09_usb0_gadget_setup()
460 		return -ENODEV; /* unable to configure using i2c */  in kfr2r09_usb0_gadget_setup()
462 	__raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB);  in kfr2r09_usb0_gadget_setup()
463 	gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */  in kfr2r09_usb0_gadget_setup()
468 	__raw_writew(0x0600, 0xa40501d4);  in kfr2r09_usb0_gadget_setup()
470 	return 0;  in kfr2r09_usb0_gadget_setup()
482 	/* register board specific self-refresh code */  in kfr2r09_devices_setup()
490 	regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,  in kfr2r09_devices_setup()
501 	__raw_writel(0x36db0400, BSC_CS0BCR);  in kfr2r09_devices_setup()
502 	__raw_writel(0x00000500, BSC_CS0WCR);  in kfr2r09_devices_setup()
505 	__raw_writel(0x36db0400, BSC_CS4BCR);  in kfr2r09_devices_setup()
506 	__raw_writel(0x00000500, BSC_CS4WCR);  in kfr2r09_devices_setup()
553 	if (kfr2r09_usb0_gadget_setup() == 0)  in kfr2r09_devices_setup()
580 	i2c_register_board_info(0, &kfr2r09_backlight_board_info, 1);  in kfr2r09_devices_setup()
589 	clk_add_alias(NULL, "1-0050", "video_clk", NULL);  in kfr2r09_devices_setup()
596 	__raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);  in kfr2r09_devices_setup()
618 	/* MD0=1, MD1=1, MD2=0: Clock Mode 3  in kfr2r09_mode_pins()
619 	 * MD3=0: 16-bit Area0 Bus Width  in kfr2r09_mode_pins()