Lines Matching +full:firmware +full:- +full:gpios
1 # SPDX-License-Identifier: GPL-2.0
36 bool "ePAPR para-virtualization support"
38 Enables ePAPR para-virtualization support for guests.
47 a hypervisor. This option is not user-selectable but should
51 bool "Support booting from Open Firmware or yaboot"
56 Support from booting from Open Firmware or yaboot using an
57 Open Firmware client interface. This enables the kernel to
58 communicate with open firmware to retrieve system information
64 bool "Device-tree based CPU feature discovery & setup"
70 binding if the firmware provides it. Currently only the skiboot
71 firmware provides this binding.
123 registers are used for inter-processor communication.
149 tristate "Firmware flash interface"
205 bool "On-chip CPU temperature sensor support"
208 G3 and G4 processors have an on-chip temperature sensor called the
209 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
210 temperature within 2-4 degrees Celsius. This option shows the current
211 on-die temperature in /proc/cpuinfo if the cpu supports it.
223 a timer is used to re-check the temperature periodically.
249 QE GPIOs.
297 bool "MPC8349E-mITX MCU driver"
301 Say Y here to enable soft power-off functionality on the Freescale
302 boards with the MPC8349E-mITX-compatible MCU chips. This driver will
303 also register MCU GPIOs with the generic GPIO API, so you'll able
304 to use MCU pins as GPIOs.