Lines Matching +full:spi +full:- +full:ranges

35 /include/ "t102xsi-pre.dtsi"
40 	#address-cells = <2>;
41 	#size-cells = <2>;
42 	interrupt-parent = <&mpic>;
44 	reserved-memory {
45 		#address-cells = <2>;
46 		#size-cells = <2>;
47 		ranges;
49 		bman_fbpr: bman-fbpr {
54 		qman_fqd: qman-fqd {
59 		qman_pfdr: qman-pfdr {
67 		ranges = <0 0 0xf 0xe8000000 0x08000000
71 			#address-cells = <1>;
72 			#size-cells = <1>;
74 			compatible = "cfi-flash";
76 			bank-width = <2>;
77 			device-width = <1>;
81 			#address-cells = <1>;
82 			#size-cells = <1>;
83 			compatible = "fsl,ifc-nand";
93 		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
96 	bportals: bman-portals@ff4000000 {
97 		ranges = <0x0 0xf 0xf4000000 0x2000000>;
100 	qportals: qman-portals@ff6000000 {
101 		ranges = <0x0 0xf 0xf6000000 0x2000000>;
105 		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
107 		spi@110000 {
109 				#address-cells = <1>;
110 				#size-cells = <1>;
111 				compatible = "spansion,s25fl512s", "jedec,spi-nor";
113 				spi-max-frequency = <10000000>; /* input clk */
131 			current-sensor@40 {
134 				shunt-resistor = <1000>;
137 			current-sensor@41 {
140 				shunt-resistor = <1000>;
146 				phy-handle = <&sgmii_rtk_phy2>;
147 				phy-connection-type = "sgmii";
156 				phy-handle = <&sgmii_aqr_phy3>;
157 				phy-connection-type = "2500base-x";
162 				phy-handle = <&rgmii_rtk_phy1>;
163 				phy-connection-type = "rgmii";
169 				rgmii_rtk_phy1: ethernet-phy@1 {
172 				sgmii_rtk_phy2: ethernet-phy@3 {
178 				sgmii_aqr_phy3: ethernet-phy@2 {
179 					compatible = "ethernet-phy-ieee802.3-c45";
188 		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0 0x10000000
191 			ranges = <0x02000000 0 0xe0000000
203 		ranges = <0x02000000 0 0xe0000000 0xc 0x10000000 0 0x10000000
206 			ranges = <0x02000000 0 0xe0000000
218 		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
221 			ranges = <0x02000000 0 0xe0000000
232 #include "t1023si-post.dtsi"